Академический Документы
Профессиональный Документы
Культура Документы
Standard Bezel
[ Bezel size ] [ From panel front ] [ Shape ] [ Contact rating ] [ Action ] [ Operating stroke ]
Illuminated Pushbuttons Pushbuttons Pilot Lights Selector Switches Key Selector Switches
Flush Bezel
[ Bezel size ] [ From panel front ] [ Shape ] [ Contact rating ] [ Action ] [ Operating stroke ]
Flush bezel accessories provide a sleek updated look. Enables downsizing of equipment.
Illuminated Pushbuttons Pushbuttons Pilot Lights Selector Switches Key Selector Switches
Unibody
B-147 For
Formore
moreinformation,
information,visit
visithttp://asia.idec.com
http://eu.idec.com
Switches & Pilot Lights
ø16 A6 Series Miniature Switches & Pilot Lights
Light duty in short 22mm body length.
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Rated Insulation Voltage 250V Operating Temperature –25 to +55°C (no freezing) LED Illumination
Rated Thermal Current 3A Storage Temperature –30 to +80°C (no freezing)
Controllers
Operating Voltage (AC/DC) 12V 24V 110V 220V Operating Humidity 45 to 85% RH (no condensation)
Operator
Resistive Load — — 1.0A 0.5A Contact Resistance 50 mΩ maximum (initial value)
AC 50/60 Hz Interfaces
Inductive Load — — 0.7A 0.5A Insulation Resistance 100 MΩ minimum (500V DC megger)
Sensors
Resistive Load 1.0A 1.0A 0.2A — Between live and dead metal parts: 2,000V AC, 1 minute
DC Between terminals of different poles: 2,000V AC, 1 minute
Dielectric
Strength
Download
Downloadcatalogs
catalogsand
andCAD
CADfrom
fromhttp://asia.idec.com/downloads
http://eu.idec.com/downloads B-148
Switches & Pilot Lights
ø16 A6 Series Miniature Switches & Pilot Lights
Illuminated Pushbuttons
Package Quantity: 1
Operating Part No. ➁ Illumination
Shape Operation Contact
Voltage IP40 IP65 Color Code
Round SPDT AL6M-M11➁ AL6M-M11P➁
AL6M 5V DC
DPDT AL6M-M21➁ AL6M-M21P➁
SPDT AL6M-M13➁ AL6M-M13P➁
APEM Momentary 12V AC/DC
DPDT AL6M-M23➁ AL6M-M23P➁
Switches &
Pilot Lights SPDT AL6M-M14➁C AL6M-M14P➁C
24V AC/DC
Control Boxes DPDT AL6M-M24➁C AL6M-M24P➁C
Emergency SPDT AL6M-A11➁ AL6M-A11P➁
Stop Switches 5V DC
DPDT AL6M-A21➁ AL6M-A21P➁
Enabling
Switches SPDT AL6M-A13➁ AL6M-A13P➁
Maintained 12V AC/DC
Safety Products DPDT AL6M-A23➁ AL6M-A23P➁
Pilot Lights
SPDT AL6H-A13➁ AL6H-A13P➁
Maintained 12V AC/DC
DPDT AL6H-A23➁ AL6H-A23P➁
SPDT AL6H-A14➁C AL6H-A14P➁C
24V AC/DC
DPDT AL6H-A24➁C AL6H-A24P➁C
LB Rectangular SPDT AL6G-M11➁ AL6G-M11P➁
w/three-sided barrier 5V DC
A6 DPDT AL6G-M21➁ AL6G-M21P➁
AL6G
SPDT AL6G-M13➁ AL6G-M13P➁
Momentary 12V AC/DC
DPDT AL6G-M23➁ AL6G-M23P➁
SPDT AL6G-M14➁ AL6G-M14P➁
24V AC/DC
DPDT AL6G-M24➁ AL6G-M24P➁
SPDT AL6G-A11➁ AL6G-A11P➁
5V DC
DPDT AL6G-A21➁ AL6G-A21P➁
SPDT AL6G-A13➁ AL6G-A13P➁
Maintained 12V AC/DC
DPDT AL6G-A23➁ AL6G-A23P➁
SPDT AL6G-A14➁ AL6G-A14P➁
24V AC/DC
DPDT AL6G-A24➁ AL6G-A24P➁
• See B-151 for dimensions.
• See B-166 for marking plate size and engraving area.
• A pure white (JW) LED lamp is used for yellow illumination.
• Part No. with “C” after the color code uses polycarbonate lens.
B-149 For
Formore
moreinformation,
information,visit
visithttp://asia.idec.com
http://eu.idec.com
ø16 A6 Series Miniature Switches & Pilot Lights
Switches &
Pilot Lights
12V AC/DC AL6M-P3➁ AL6M-P3P➁
Control Boxes
Emergency
Stop Switches
24V AC/DC AL6M-P4➁C AL6M-P4P➁C Enabling
Switches
Safety Products
Square
AL6Q-P Explosion Proof
5V DC AL6Q-P1➁ AL6Q-P1P➁
Terminal Blocks
Power Supplies
Specify a color code in place of
➁ in the Part No. LED Illumination
24V AC/DC AL6Q-P4➁C AL6Q-P4P➁C
A: amber Controllers
G: green
Rectangular JW: pure white Operator
AL6H-P R: red Interfaces
5V DC AL6H-P1➁ AL6H-P1P➁
S: blue Sensors
Y: yellow
AUTO-ID
Flush Silhouette
24V AC/DC AL6H-P4➁C AL6H-P4P➁C ø16
ø22
Rectangular w/three-sided barrier
AL6G-P ø30
5V DC AL6G-P1➁ AL6G-P1P➁
Miniature
Pilot Lights
12V AC/DC AL6G-P3➁ AL6G-P3P➁
LB
24V AC/DC AL6G-P4➁ AL6G-P4P➁
A6
Download
Downloadcatalogs
catalogsand
andCAD
CADfrom
fromhttp://asia.idec.com/downloads
http://eu.idec.com/downloads B-150
Switches & Pilot Lights
ø16 A6 Series Miniature Switches & Pilot Lights
18
APEM
5
1 0.6 5.7
Switches & 6 6 24 18
8 22 9
Pilot Lights 9
1.2
Switches 2-R0.6
Explosion Proof
Terminal Blocks
Terminal Arrangement (bottom view)
Illuminated Pushbutton Pilot Light
Relays & Sockets
(TOP) (TOP)
Circuit
Protectors NC1 NC2
Power Supplies
C1 C2
Controllers Lamp Lamp Lamp Lamp
Terminal (+) Terminal (–) Terminal (+) Terminal (–)
Operator
Interfaces With contact: NC1, NO1, C1 terminal only
Sensors
AUTO-ID
ø22
Note: Determine mounting centers to
18 min.
18 min.
Miniature
18 min. 24 min.
Pilot Lights
LB
A6
B-151 For
Formore
moreinformation,
information,visit
visithttp://asia.idec.com
http://eu.idec.com
ø16 A6 Series Miniature Switches & Pilot Lights
Download
Downloadcatalogs
catalogsand
andCAD
CADfrom
fromhttp://asia.idec.com/downloads
http://eu.idec.com/downloads B-152
Switches & Pilot Lights
ø16 A6 Series Miniature Switches & Pilot Lights
18
APEM
5
2-R0.6
Safety Products
* Solder/Tab Terminal
Explosion Proof
• See B-164 for lens and button maintenance parts.
Terminal Blocks
Circuit
Protectors Mounting Hole Layout Terminal Arrangement (bottom view)
Power Supplies Round/Square Rectangular Pushbutton
w/3-way barrier
LED Illumination (TOP)
+0.2
ø16.2 0 ø16.2 +0.2
0
NC1 NC2
Controllers
Operator
Interfaces
18 min.
18 min.
NO1 NO2
Sensors
C1 C2
AUTO-ID
18 min. 24 min. Note: SPDT has only NC1, NO1, and C1 terminals.
ø16
ø22
ø30
Miniature
Pilot Lights
LB
A6
B-153 For
Formore
moreinformation,
information,visit
visithttp://asia.idec.com
http://eu.idec.com
ø16 A6 Series Miniature Switches & Pilot Lights
L R Explosion Proof
SPDT AS6M-21Y1C AS6M-21Y1PC NO NC NO NC
Spring return from right to left
DPDT AS6M-21Y2C AS6M-21Y2PC —
Maintained Terminal Blocks
90° 2-position
C C
Maintained DPDT AS6M-3Y2C AS6M-3Y2PC
3-position
Spring return from right to center DPDT AS6M-31Y2C AS6M-31Y2PC DPDT Relays & Sockets
45°
Spring return from left to center DPDT AS6M-32Y2C AS6M-32Y2PC L R Left Right Left Right Circuit
Contact Contact Contact Contact
Spring return two-way DPDT AS6M-33Y2C AS6M-33Y2PC NO NC NO NC NO NC NO NC Protectors
—
Square SPDT AS6Q-2Y1C AS6Q-2Y1PC Spring return Power Supplies
Maintained from right
AS6Q-Y
2-position
C C C C
DPDT AS6Q-2Y2C AS6Q-2Y2PC
90°
LED Illumination
SPDT AS6Q-21Y1C AS6Q-21Y1PC C DPDT
L R
Spring return from right to left
DPDT AS6Q-21Y2C AS6Q-21Y2PC Controllers
Maintained DPDT AS6Q-3Y2C AS6Q-3Y2PC Maintained Operator
3-position
C
DPDT AS6H-2Y2C AS6H-2Y2PC L R
90°
L R
Spring return from right to center DPDT AS6H-31Y2C AS6H-31Y2PC ø16
45°
Spring return from left to center DPDT AS6H-32Y2C AS6H-32Y2PC Two-way ø22
Spring return two-way DPDT AS6H-33Y2C AS6H-33Y2PC return
ø30
• Bezel: black • Knob: black
Miniature
Pilot Lights
LB
A6
Download
Downloadcatalogs
catalogsand
andCAD
CADfrom
fromhttp://asia.idec.com/downloads
http://eu.idec.com/downloads B-154
Switches & Pilot Lights
ø16 A6 Series Miniature Switches & Pilot Lights
Switches &
18
5
Pilot Lights
Control Boxes
1 8
Emergency
Stop Switches 8 22 15.5 24 18
Enabling
Switches
Safety Products
18 min.
Power Supplies NO1 NO2
LED Illumination C1 C2
Sensors
AUTO-ID
Flush Silhouette
ø16
ø22
ø30
Miniature
Pilot Lights
LB
A6
B-155 For
Formore
moreinformation,
information,visit
visithttp://asia.idec.com
http://eu.idec.com
ø16 A6 Series Miniature Switches & Pilot Lights
L
C
R
Terminal Blocks
C DPDT AS6M-3KT2CC AS6M-3KT2PCC
Relays & Sockets
C
L R
Maintained D DPDT AS6M-3KT2DC AS6M-3KT2PDC Circuit
Protectors
C
E
L R
DPDT AS6M-3KT2EC AS6M-3KT2PEC Power Supplies
C LED Illumination
L R
G DPDT AS6M-3KT2GC AS6M-3KT2PGC
Controllers
C
L R
H DPDT AS6M-3KT2HC AS6M-3KT2PHC Operator
45° Interfaces
3-position L
C
R Sensors
B DPDT AS6M-31KT2BC AS6M-31KT2PBC
AUTO-ID
C
L R
Spring return from right D DPDT AS6M-31KT2DC AS6M-31KT2PDC
C
L R
G DPDT AS6M-31KT2GC AS6M-31KT2PGC
Flush Silhouette
C
L R
C DPDT AS6M-32KT2CC AS6M-32KT2PCC
ø16
C
L R
Spring return from left D DPDT AS6M-32KT2DC AS6M-32KT2PDC ø22
L
C
R
ø30
H DPDT AS6M-32KT2HC AS6M-32KT2PHC
Miniature
C
L R
Spring return two-way D DPDT AS6M-33KT2DC AS6M-33KT2PDC Pilot Lights
Contact Operation
Operator Position & Contact Operation (Top View)
Positions Contact Left Center Right
NO NC NO NC
SPDT —
L R L R C C
Download
Downloadcatalogs
catalogsand
andCAD
CADfrom
fromhttp://asia.idec.com/downloads
http://eu.idec.com/downloads B-156
Switches & Pilot Lights
ø16 A6 Series Miniature Switches & Pilot Lights
LED Illumination C
L R
G DPDT AS6Q-3KT2GC AS6Q-3KT2PGC
Controllers
C
L R
Operator H DPDT AS6Q-3KT2HC AS6Q-3KT2PHC
Interfaces 45°
3-position L
C
R
Sensors B DPDT AS6Q-31KT2BC AS6Q-31KT2PBC
AUTO-ID C
L R
Spring return from right D DPDT AS6Q-31KT2DC AS6Q-31KT2PDC
C
L R
G DPDT AS6Q-31KT2GC AS6Q-31KT2PGC
Flush Silhouette C
L R
C DPDT AS6Q-32KT2CC AS6Q-32KT2PCC
ø16
C
L R
ø22 Spring return from left D DPDT AS6Q-32KT2DC AS6Q-32KT2PDC
C
ø30 L R
H DPDT AS6Q-32KT2HC AS6Q-32KT2PHC
Miniature C
L R
Spring return two-way D DPDT AS6Q-33KT2DC AS6Q-33KT2PDC
Pilot Lights
Contact Operation
Operator Position & Contact Operation (Top View)
Positions Contact Left Center Right
NO NC NO NC
SPDT —
L R L R C C
B-157 For
Formore
moreinformation,
information,visit
visithttp://asia.idec.com
http://eu.idec.com
ø16 A6 Series Miniature Switches & Pilot Lights
C
L R Terminal Blocks
C DPDT AS6H-3KT2CC AS6H-3KT2PCC
C
Relays & Sockets
L R
Maintained D DPDT AS6H-3KT2DC AS6H-3KT2PDC Circuit
Protectors
C
L R
E DPDT AS6H-3KT2EC AS6H-3KT2PEC Power Supplies
C LED Illumination
L R
G DPDT AS6H-3KT2GC AS6H-3KT2PGC
Controllers
C
L R
H DPDT AS6H-3KT2HC AS6H-3KT2PHC Operator
45° Interfaces
3-position L
C
R
B DPDT AS6H-31KT2BC AS6H-31KT2PBC Sensors
C AUTO-ID
L R
Spring return from right D DPDT AS6H-31KT2DC AS6H-31KT2PDC
C
L R
G DPDT AS6H-31KT2GC AS6H-31KT2PGC
C Flush Silhouette
L R
C DPDT AS6H-32KT2CC AS6H-32KT2PCC
ø16
C
L R
Spring return from left D DPDT AS6H-32KT2DC AS6H-32KT2PDC ø22
C
L R ø30
H DPDT AS6H-32KT2HC AS6H-32KT2PHC
C
Miniature
L R
Spring return two-way D DPDT AS6H-33KT2DC AS6H-33KT2PDC
Pilot Lights
A6
Contact Operation
Operator Position & Contact Operation (Top View)
Positions Contact Left Center Right
NO NC NO NC
SPDT —
L R L R C C
Download
Downloadcatalogs
catalogsand
andCAD
CADfrom
fromhttp://asia.idec.com/downloads
http://eu.idec.com/downloads B-158
Switches & Pilot Lights
ø16 A6 Series Miniature Switches & Pilot Lights
Right Contact
2.5
1.0 2.6
TOP
3
1.2
Left Contact 2-R0.6
NO
18
Emergency
5
C
Stop Switches
Enabling 1
Switches 9
8 22 26 ø18 18 24
Safety Products
Explosion Proof
LED Illumination
NO1 NO2
Controllers
C1 C2
Operator
Interfaces 18 min. 24 min. SPDT has NC1, NO1, and C1 only.
Sensors
Note: Determine mounting centers to ensure easy operation.
AUTO-ID
Spare Key
Flush Silhouette t =1.8
8.1 17
ø16
18
7
ø22
ø30
ø3
.0
Miniature
∗
LB
A6
B-159 For
Formore
moreinformation,
information,visit
visithttp://asia.idec.com
http://eu.idec.com
ø16 A6 Series Miniature Switches & Pilot Lights
Package
Shape Material Part No. Ordering No. Remarks
Quantity
Locking Ring Wrench
ø18 Metal
• Used to tighten the locking ring when
(nickel-plated MT-001 MT-001 1
installing A6 control units into a panel.
60 brass)
APEM
Lamp Holder Tool ø9 Switches &
Pilot Lights
ø10 Rubber OR-77 OR-77 1 • Used to install and remove the LED lamps.
55 Control Boxes
Mounting Hole
2 +0
polyacetal
Gasket: nitrile
Gasket Locking Ring
Panel Thickness 0.5 to 6
Download
Downloadcatalogs
catalogsand
andCAD
CADfrom
fromhttp://asia.idec.com/downloads
http://eu.idec.com/downloads B-160
Switches & Pilot Lights
ø16 A6 Series Miniature Switches & Pilot Lights
Switch Guard
[Remains open]
For round/square units (Degree of protection: IP40) For rectangular units (Degree of protection: IP65)
LB9Z-K2 LB9Z-K3P
Switches &
Pilot Lights Rubber Gasket
Rubber Gasket 18
24
Control Boxes 32.9
32.9
Emergency
Stop Switches
18 °
18 °
0
0
13
13
11
11
11
0°
0°
11
Enabling
23.5
23.5
Switches
Safety Products
12.4 12.4
Explosion Proof
Terminal Blocks
[Spring return]
Relays & Sockets
For round/square units (Degree of protection: IP40) For rectangular units (Degree of protection: IP40)
Circuit AL-K6S AL-KH6S
Protectors
Panel Thickness Panel Thickness
Power Supplies 0.5 to 5 34 0.5 to 5 34
LED Illumination
33
33
Operator
Interfaces
13
13
11
11
Sensors
23.5
23.5
AUTO-ID
13.5 13.5
Flush Silhouette
For round/square units (Degree of protection: IP65) For rectangular units (Degree of protection: IP65)
AL-K6SP AL-KH6SP
ø16
Panel Thickness Panel Thickness
ø22 0.5 to 5 34 0.5 to 5 34
ø30
33
Pilot Lights
13
13
11
11
23.5
23.5
Waterproof Waterproof
LB Gasket for Switch Gasket for Switch
Guard 0.4 13.5 Guard 0.4 13.5
A6
B-161 For
Formore
moreinformation,
information,visit
visithttp://asia.idec.com
http://eu.idec.com
ø16 A6 Series Miniature Switches & Pilot Lights
Socket
+0.3
TOP Terminal 1.5×0.3t 8-1.6 0 Holes
33.5 2.5 3 33.5 2.5 3
(TOP)
2.4
NC1 NC2
5
APEM
5
NO1 NO2
Switches &
16.2 7.5 6 6 16.2 3.8 6 6 C1 C2 Pilot Lights
Lamp Lamp
Terminal (+) Terminal (–) Control Boxes
Solder Terminal PC Board Terminal PC Board Terminal Arrangement
Mounting Hole Layout Emergency
(AL-C6) (AL-C6V) (Bottom View)
(Bottom View) Stop Switches
Enabling
Switches
Safety Products
Terminal Cover
Explosion Proof
17.3
Terminal Blocks
Note: When wiring the terminals, insert the lead wires
into the terminal cover holes before soldering.
ø16.8
Circuit
33.5 Protectors
Power Supplies
LED Illumination
Dust Cover Mounting Hole Centers
Controllers
For Round Units For Square Units For Rectangular Units Round/Square Units Rectangular Units Operator
(AL-D6) (AL-DQ6) (AL-DH6) Interfaces
ø24 24 30 ø16.2 +0.2
0 ø16.2
+0.2
0 Sensors
AUTO-ID
24
24 min.
24 min.
Flush Silhouette
13
13
13
ø16
7.5
7.5
7.5
24 min. 30 min.
ø22
0.3
0.3
Waterproof Gasket
for Dust Cover for Dust Cover for Dust Cover
ø30
Miniature
ø23.5
5
17.5
A6
5
Download
Downloadcatalogs
catalogsand
andCAD
CADfrom
fromhttp://asia.idec.com/downloads
http://eu.idec.com/downloads B-162
Switches & Pilot Lights
ø16 A6 Series Miniature Switches & Pilot Lights
Dimensions
HE9Z-GSH51 HE5B Enabling Switch
144 (78)
(ordered separately)
Flush Silhouette 92
ø16
39
Miniature
38
Pilot Lights
Locking Ring
HE5B Enabling Switch (not supplied with the grip style enabling switch housing)
• Anti-rotation ring is not required when installing the HE5B enabling switch on the HE9Z-GSH51 grip style enabling
switch housing. Use the locking ring only.
Mounting Bracket
Part No: HE9Z-GH1 50 2-ø5.3
(For M5 mounting screws)
20
Plastic Coating
33
81 86 Material: SUS304
Thickness: 3.0 mm All dimensions in mm.
B-163 For
Formore
moreinformation,
information,visit
visithttp://asia.idec.com
http://eu.idec.com
ø16 A6 Series Miniature Switches & Pilot Lights
Control Boxes
Button
Round AB6M-B➀ AB6M-B➀PN05 Emergency
Stop Switches
Specify a color code in place of ➀ in the
Part No. Enabling
Square Polyarylate AB6Q-B➀ AB6Q-B➀PN05 Switches
5 B (black), G (green), R (red)
S (blue), W (white), Y (yellow) Safety Products
Rectangular AB6H-B➀ AB6H-B➀PN05
Explosion Proof
Pilot Lights
10
Anti-rotation Ring
Spare key A6
Key selector Brass with
AS6-SK-132 AS6-SK-132PN02 2 • Thickness 1.8 mm
(disc tumbler key) nickel plating
Spare Key
Non-reversible
Gasket
Download
Downloadcatalogs
catalogsand
andCAD
CADfrom
fromhttp://asia.idec.com/downloads
http://eu.idec.com/downloads B-164
Switches & Pilot Lights
ø16 A6 Series Miniature Switches & Pilot Lights
LED Lamps
Operating Current Draw ➁ Illumination Package
Dimensions Part No. Ordering No. Base
Voltage AC DC Color Code Quantity
8 mA (A, G, R, W) LATD-5➁ 1
5V DC ±5% — LATD-5➁
7 mA (JW, S) LATD-5➁PN10 10
Specify a color code
in place of ➁ in the
8 mA (A, R, W) 6 mA (A, R, W) LATD-6➁ 1
Ordering No.
APEM 6V DC ±5% 7 mA (G) 5 mA (G) LATD-6➁
6 mA (JW, S) 4 mA (JW, S) LATD-6➁PN10 10
Switches &
13.3
A: amber Exclusive for
12
Pilot Lights G: green A6 series
4
9 mA (A, G, R, W) 8 mA (A, G, R, W) LATD-1➁ 1
12V AC/DC ±10% LATD-1➁ JW: pure white
Control Boxes
8 mA (JW, S) 7 mA (JW, S) LATD-1➁PN10 R: red 10
Voltage
Emergency
Electrode
S: blue
Stop Switches W: white
9 mA (A, G, R, W) 8 mA (A, G, R, W) LATD-2➁ 1
Enabling 24V AC/DC ±10% LATD-2➁
Switches 8 mA (JW, S) 7 mA (JW, S) LATD-2➁PN10 10
Safety Products
• Use a pure white (JW) LED lamp for yellow illumination
Explosion Proof
Terminal Blocks
Circuit Transformer
Protectors
Package Quantity: 1
Power Supplies
Transformer Primary Voltage Secondary Voltage Part No. (Ordering No.) Applicable LED
LED Illumination For 24V 100/110V AC ±10% TWR512
200/220V AC ±10% TWR522 LATD-2➁
Controllers
400/440V AC ±10% TWR542
Operator
Interfaces • Terminal cover is supplied as standard.
Sensors • Connect only one LATD to a transformer.
AUTO-ID
Specifications Dimensions All dimensions in mm.
100/110V AC, 200/220V AC, M3.5
Operating Voltage
400/440V AC (50/60Hz) Terminal Screw
Current Draw 2.4VA
Flush Silhouette
Rated Insulation Voltage 600V
4
2
JAPAN
PRI.
45.5
End Clip
B-165 For
Formore
moreinformation,
information,visit
visithttp://asia.idec.com
http://eu.idec.com
ø16 A6 Series Miniature Switches & Pilot Lights
ø10
OR-77
ø9
plate.
55 Relays & Sockets
Fitting Grooves
Grooves
Circuit
Protectors
Panel Mounting Power Supplies
Engraving When mounting the control units into a panel, use the optional locking
Surface LED Illumination
ring wrench (MT-001) to tighten the locking ring. Do not use pliers.
Color Lens Marking Plate Lens Holder Tightening torque must not exceed 0.88 N·m. Excessive tightening will Controllers
damage the locking ring.
Operator
Interfaces
Installation
Place the marking plate on the lens holder in the correct direction, and Wiring Sensors
press the color lens onto the lens holder to engage the latches. Solder the terminal at 350°C within 3 seconds using a 60W soldering
AUTO-ID
Put the spring on the lens holder and insert the lens holder into the iron. Sn-Ag-Cu is recommended when using lead-free solder. When
housing in the correct direction. soldering, do not touch the control unit with the soldering iron. Also
ensure that no tensile force is applied to the terminal. Do not bend the
terminal or apply excessive force to the terminal. Use a non-corrosive
Marking rosin flux. Flush Silhouette
For A series illuminated pushbuttons, legends and symbols can be
engraved on the built-in marking plates, or printed film can be inserted ø16
under the lens for labelling purposes. Installing the Socket ø22
Marking Plate & Engraving Area Install the socket on the control unit with the TOP markings on the ø30
Round Square Rectangular control unit and the socket placed in the same direction.
Built-in Marking Plate and
Miniature
Engraving
12.0
Engraving
Switch Guard
ø12.0
Engraving Area
Area
Engraving Area
0.8
control units only. Even if IP65 type switch guards are installed,
0.8
Control Unit
IP40 IP40 IP40
ø 13.6
13.6
Download
Downloadcatalogs
catalogsand
andCAD
CADfrom
fromhttp://asia.idec.com/downloads
http://eu.idec.com/downloads B-166
Switches & Pilot Lights
ø16 A6 Series Miniature Switches & Pilot Lights
Emergency
Stop Switches
Enabling
Switches Hinge
Safety Products
Base
Explosion Proof
Terminal Blocks
Operating Voltage of LED Lamps
The operating voltage of 5V DC is measured at complete DC.
Relays & Sockets
Circuit
Protectors Other Notes
Power Supplies Close Proximity Mounting
LED Illumination When mounting pilot lights or illuminated pushbuttons collectively or
lighting them continuously, heat may cause the ambient temperature
Controllers to rise above the rated operating temperature. When the mounting
Operator panel is not made of metal or when the control units are mounted in an
Interfaces enclosed panel, provide for ventilation or lower the operating voltage.
Sensors Replacement of Buttons (Illuminated/Non-illuminated)
AUTO-ID
Do not replace buttons of maintained action units while the button is
in the locked position. Replacing the button in the locked position may
damage the internal mechanism. Be sure to release the button before
replacing.
Operating and Storage Environment
Flush Silhouette
1. Make sure that the operating/storage temperature and humidity are
ø16 within the ratings.
2. Do not use enclosed type units in an environment subject to oil,
ø22
water or dust accumulation. In such an area, use the waterproof/
ø30 oiltight units (IP65).
Microswitch Contacts
Miniature
Do not connect NO and NC contacts of a microswitch to different
Pilot Lights voltages or different power sources to prevent a dead short-circuit.
IP65 Units
IP65 units are evaluated by conventional cutting and cooling oils, and
can not be used with some special oils. Contact IDEC for resistance
LB against specific oils.
A6
B-167 For
Formore
moreinformation,
information,visit
visithttp://asia.idec.com
http://eu.idec.com