Академический Документы
Профессиональный Документы
Культура Документы
Many years of practical experience have made ELECONS Simplest and easiest means for controlling the feed rate.
improved version (model) of JU-EXCITER Feeders. It protects the belt conveyor from damage by feeding the
ELECON JU-EXCITER TYPE FEEDERS material on to belt conveyor from stacker reclaimer, stor-
are ideally suitable for worst working conditions and are age hopper, dumpers etc.
unaffected by hear or dust. Because of low frequency and Drive unit consists of standard squirrel cage induction
high distance of oscillation operation, JU-EXCITER FEED- motor, JU-EXCITER gear box, cardan shaft etc.
ERS are the complete answer to the conveyance and JU-EXCITER unit consisit of standard motor and case
screening of difficult material. carburised & ground gear unit. Due to case carburisation,
gear internals have longer life.
T = HOPPER OPENING
H = OUTLET HEIGHT
B = DECK INCLINATION
L = DECK LENGTH
D = SKIRT HEIGHT AT
DISCHARGE SIDE
TECHNICAL DATA SERVICE :
Technical data for ELECON JU-EXCITER UNIT are ELECON has a team of highly experienced special-
summarised on the following table. The range of ists who know most of the customers problems and
weights for the masses to be driven relate to the they are able to provide proper advice to their valu-
applicaiton of JU-EXCITER. If several linear exciter able customers.
of the same type are used higher weights can be
driven. ELECON has an experienced erecting engineers team.
They provide immediate help to their customers in
As three phase motors, all usual motors of 50HZ with INDIA and ABROAD.
voltages indicated can be used, but it has to be taken ELECON has a great stock of JU-EXCITER Vibrating
into consideration that the maximum speed of the Units and spares. Repairs are carried out in our own
exciters is 1000 rpm. Allowable temp. comes to 55 workshop.
Degree C. (Maximum)
TECHNICAL DATA
DIMENSIONS IN MM
TYPE a b c d e DIA f g h i k l m o p DIA s t
JU 200 4 x 110 190 760 650 480 10xDIA 26 580 260 25 700 76 250 250 568 8xDIA 8 101.5
JU 400 5 x 110 220 890 700 560 12xDIA 26 680 295 25 810 88 280 290 606 8xDIA 10 155.5
JU 600 5 x 120 300 950 820 585 12xDIA 33 740 320 34 850 90 380 320 720 8xDIA 12 155.5
JU 800 5 x 120 300 970 970 610 12xDIA 33 740 335 34 860 100 380 330 866 8xDIA 16 196
PRODUCTION OF LINEAR MOTION
BY MEANS OF EXCITERS.
SELLING AGENT
EMTICI Engineering Ltd.,
Phone : +91-2692-30168, 31082, 31419, 31125
Fax : +91-2692-36508
E-Mail : sales_emtici@emtici.elecon.com