Академический Документы
Профессиональный Документы
Культура Документы
1.At real-time status, move the cursor and enter into “PRESET” item in [B IMAGE
MENU] ,press 【SET】key and【PRESET】 submenu appears, the system enters into
Preset mode.
2.Then select [DICOM SETTING] item. The dialogue-box of ultrasonic will show as below:
When you input the DICOM S/N,and then press 【OK】.DICOM function will be actived.
If the activation of DICOM has been completed, the above dialogue-box will not appear again,
you can enter into the DICOM Setting directly.
3. And then, you can enter the DICOM SETTING dialogue-box, which showed in the below:
Remarks:
1. You should check the setting of your PACS Server.
2. You can get the server IP in your PACS Server.
3. The Local IP Address will be different in the server IP in the last bit.
Such as
4. the SCP Port,: set the working port, you can get it in the PACS Server.
After you input all the information in the above dialogue-box, then you can press
【DICOM Verify】.
If the communication is good, you will find the tip “Dicom Verify OK!” That means the DICOM
can work now. If the communication fails, you will find the tip “Dicom Verify failed!” Please
check your setting, web connecting and workstation.