Академический Документы
Профессиональный Документы
Культура Документы
Once printed this specification becomes an uncontrolled copy of the online version.
Standards Referenced
Listed below are the publications of which some are directly referred to in NS-1 specifications.
1. For the publications in this list, the latest edition current at the time of purchase order issue shall apply.
2. When equipment is purchased to NS-1 and a governing specification (e.g. ISO 10423/API-6A), the revision
status of secondary publications listed below may not match that of the same standards listed in the governing
specification. If this is the case, the revision(s) quoted in the governing specification shall rule.
3. Certain ISO standards may or may not actually have been issued at the time of the CD-ROM release. In
such cases revert to the API Spec. equivalent number stated between the brackets.
Photocopying or reproducing this page in any way constitutes as infringement of the license agreement
for the continued supply of the NS-1™ Service
NS 1 Page 1
Quality and Inspection Requirements for New and Refurbished Drilling and Well Completion Equipment
Once printed this specification becomes an uncontrolled copy of the online version.
IADC/SPE 17206 Appropriate Design of Drill Pipe Internal upset Geometry Focusing on Fatigue Property.
IADC/SPE 19964 Fracture Toughness Criteria for High Strength Drill Pipe?
IADC/SPE 23841 What difference does Miu make in Fatigue life of Drill Pipe.
BS578 Quality Assurance requirements for measuring equipment. Part 1: Metrological confirmation system for
measuring equipment.
API.BUL 5C3 Formulas and Calculations for casing, tubing drill pipe and line pipe properties.
API RP 5C1 Care and use of casing and tubing.
API RP 7G Drill stem design and operating limits.
API RP 10E Application of cement lining to steel tubular goods, handling, installation and joining.
API RP 14B Subsurface safety valve systems – Design installation, repair and operation.
API RP 14C Offshore production platforms – Analysis, design installation and testing of basic surface safety sys-
tems.
API RP 14H Installation, maintenance and repair of surface safety valves and underwater safety valves offshore.
API Std. 5B Specification for threading, gauging and thread inspection of casing, tubing and linepipe threads.
API Spec.6A Specification for wellhead and christmas tree equipment.
API Spec. 10D Bow-spring casing centralisers – Specification.
API Spec. 11B Sucker rods (pony rods, polished rods, couplings and sub-couplings) – Specification.
API Spec. 11E Pumping units – Specification.
API Spec. 14A Specification for subsurface safety valve equipment.
API Spec. 14D Specification for wellhead surface safety valves and underwater safety valves for offshore service.
API Spec. 5CT Specification for tubing and casing.
MIL-Std. 105D Sampling procedures and tables for inspection by attributes.
MPIF Std. 1-6 Method for sampling finished lots of metal powders.
MPIF Std. 5-62 Method for sieve analysis of granular metal powders.
NACE Standard MR0175-94 Material requirement for sulphide stress cracking resistant material for oilfield equip-
ment.
Photocopying or reproducing this page in any way constitutes as infringement of the license agreement
for the continued supply of the NS-1™ Service
NS 1 Page 2