Академический Документы
Профессиональный Документы
Культура Документы
municaon Connecons for all 3000 1. Field connecon = (Used only with oponal J-Box)
Electronic, Truck and 700,800,900
2. All wiring must be installed and used in accordance with the naonal
Dispensers (only for a maximum of electrical code (NFPA #70, Automove and marine service code NFPA
one Diesel and one DEF). #30A), State and Local electrical codes.
Current Loop 3. All wiring gauge is minimum required, connuous without splicing,
stranded wire with THHN Insulaon must be used. Do NOT reuse old
Personality Module
wire from an exisng installaon.
(121982) (note 6)
4. Use only rigid metal conduit. Do not use PVC conduit.
(FUEL COMMUNICATION)
5. Absolutely no daisy chaining of data wires. Damage to the dispenser or
console will result. Do not connect these wires if unit is used without a
TS1 *JP1 TS2 *JP2 console.
1 2 1 2 6. The Personality Board used for Current Loop is the same Personality
Board used for Generic Loop.
8. Benne: recommends that the RS485 wires for (oponal) Card Readers
are twisted at least 3 mes per foot from the dispenser to the Interface
* There are no Box.
shunts used for JP1
7” or 10” Card Reader COMMUNICATION
and JP2 while using
(oponal)
the Current Loop
Not Used VAC Hot
Protocol.
Not Used VAC Neutral
RS485 (+) Violet 18 GA.
RS-485 Data +
Not Used RS-485 Data Common
RS485 (-) Yellow 18 GA.
RS-485 Data -
3/4” Conduit
(electronic enclosure)
Oponal Factory
Installed J-Box
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Benne* Pump Company
(If J-Box not present wire directly to electronic enclosure.) Telephone: 231-798-1310
www.benne:pump.com