Академический Документы
Профессиональный Документы
Культура Документы
J1939 Wiring
Connecting Modules to the CAN Data Link
g02230280
Illustration 34
g02230284
Illustration 35
Illustration 33
g02230279 c. Remove 7 mm (0.28 inch) of insulation from
each end of the green wire and the yellow wire.
Illustration 33 shows the connection of modules to
the CAN data link. The following requirements must d. Crimp a 186-3736 Connector Socket on each
be met before installation of modules on the CAN end of the green wire and the yellow wire with
data link: a 1U-5804 Crimp Tool.
52