Академический Документы
Профессиональный Документы
Культура Документы
Subject : Proposal of PLP Solar Roof Mounting Structures for Solar Roof Project 5 MW
Dear Sir,
Thank you for your time and it’s our pleasure to hear your feedback and getting to know your expectation
on yesterday meeting. Now we are please to propose a reliable and high quality solar roof mounting product with
competitive price. The preassembled, lightweight components are intended to reduce installation time and labor
requirements. The design also features high strength, corrosion resistant materials for durability and longevity. In
addition to a reliable product, PLP Solar can also source additional services through our network of trusted
partnerships, push/pull tests, rack assembly, module mounting, and on‐site installer training.
Please find the enclosed proposal detail. So, we thanks you for your generosity and supportive and we hope you will
find interest of our proposal and we look forward to work with you as a partner and we will be much appreciated to hear
your feedback and should you need any further information, please feel free to contact us.
Yours faithfully,
Parute Chanwilai
Preformed Line Products (Thailand) Ltd.
Tel : + 66 (0) 2 739 4026 ext 206 / Fax : + 66 (0) 2 739 6427/ Mob : +66818087562
www.preformed.asia Email : parutec@preformed.asia
General
This section is the commercial terms and conditions which we are pleased to offer as a part of our proposal. This proposal is valid for
purchasing with the full compliance of the terms and conditions stated in this section. Any adjustment to this commercial terms and
conditions may cause the price adjustment.
3 Solar roof mounting kit for CPAC Monia roof using Tile bracket
Item Project Roof Type Modular Design Modular Qty Panel Qty
System Summary
L-Bracket w/Self screw Solution -: There are 3,125 strings of 5x1 modular.
Qty each
Item Picture DESCRIPTION Total Qty
Modular
Note : All components are for standard mounting flat-to-roof. No tilt adjustment.
Price for L-Bracket w/Self screw solution 5,350,000.00 Baht (Exclude VAT)
1.07 Baht/watt
Scope of Supply-:
- Mounting structures with details and quantities following to Bill of Material shown in table.
- Structure weight calculation.
- Wind load calculation.
- Modular layout drawing.
4. Delivery Time
Customer to check lead time at the date of placing order. Normal lead time for 5 MW will be 6-8 weeks after PO
and down payment received. Shorter lead time will be negotiable and depend on capacity work load. Partial
shipment is applicable.
5. Term of Price
DAP at site in Thailand. The Value Added Tax is NOT included in this price.
6. Term of Payment
Payment term: Min. advance payment 20%, the balance of order will be paid with PDC 30 days before each
shipment.
The sole remedy shall be repair or replace, at PLP’s sole option, any PLP product which proves to be defective
within such warranty period. This warranty shall not apply if the PLP product has been damaged by unreasonable
use, accident, negligence, service or modification by anyone other than PLP, or by any other cause unrelated to
materials and workmanship. This Warranty does not cover damage to the Product that occurs during its shipment,
storage, or installation or installation of the Product is not performed in accordance with PLP’s written installation
instructions, or if the Product has been modified, repaired, or reworked in a manner not previously authorized by
PLP IN WRITING, or if the Product is installed in an environment for which it was not designed. Under no
circumstances shall PLP be liable for special, indirect or consequential damages arising out of or related to use by
Purchaser of the Product.
In addition, the limited warranties do not apply to any cosmetic change in appearance stemming from the normal
wear and tear over time of product materials. Warranty claims will not apply if the product label, type or serial
number of the applicable product has been altered, removed or made illegible.
No product will be returned to PLP without its prior Return Authorization (RA) and the original purchase receipt as
proof of purchase. To receive in-warranty service, PLP must receive the product within the warranty period, and
accompanied by proof of purchase and an RA number.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR
OTHERWISE ARISING BY OPERATION OF LAW, TRADE, USAGE OR COURSE OF DEALING, INCLUDING, WITHOUT LIMITATION,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. PLP SHALL NOT BE LIABLE
FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES OF ANY KIND, NOR UNDER ANY CIRCUMSTANCE SHALL PLP BE
LIABLE FOR DAMAGES BEYOND THE PRICE OF THE PRODUCT PURCHASED BY PURCHASER, WHETHER IN CONTRACT, IN
TORT OR UNDER ANY WARRANTY OR OTHER USE, AND WHETHER OR NOT SAID LOSS, COST, PENALTY OR DAMAGE WAS
REASONABLY FORESEEABLE.
8. Validity
The proposal is valid for 60 days and subject to volume 5 MW.
9. Other Conditions
We trust that our proposal would be of your interested and in compliance with your requirement. Should you have
any questions or need any further clarification please feel free to contact us.