Академический Документы
Профессиональный Документы
Культура Документы
WARNING
- Do not dismantle the housing or modify the product.
User’s Guide Dismantling the housing or modifying the product may result in electrical
shock or burn.
- Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing
housing may expose you to dangerous voltage or other hazards.
- Keep the product away from liquids.
Spilling into the housing may result in fire, electrical shock, or equipment
damage. If an object or liquid falls/spills into the housing, unplug the
product immediately. Have the product checked by a qualified service
engineer before using it again.
- Do not touch the Product with wet hands.
Touching the housing and plug with wet hands is dangerous and can
cause electrical shock.
- Do not pull out the cable by the power over maximum allowable
tensile load or bend excessively over bending radius.
By the over pull-out strength or excessive bending, the optical performance
HDML-Axxx of HDM cable can be deteriorated. Please comply with the specification.
Optical HDMI Extender
Description
SMARTVM’s HDML-Axxx extender receive electrical HDMI(High Definition
Multimedia Interface) signal from DVDP, Set-top box or other video
equipment to convert it to optical signal in order to transmit it long away
without any signal degradation. Finally, by the optical signal being
converted to electrical HDMI signal, original signal from video source can
SmartVM be transferred without any noise to display like HDTV, PDP and projector,.
23900 Mercantile Rd. Cleveland OH 44122
etc.
Toll Free # 866-999-3210 Tel # 216-765-1122 Fax # 216-765-0548
E-mail : Sales@smartvm.com Website : www.smartvm.com Ver 1.0
Features
l High speed and long distance transmission by Optical cable(LC-type
1
SmartVM HDMI Extension System User’s Guide v1.1
2
SmartVM HDMI Extension System User’s Guide v1.1
Video Output
Pin Signal Pin Signal
Output Signal…………………….. 1 Single Link HDMI
Connectors………………………….1 HDMI Type A receptacle connector
1 TMDS Data 2+ 2 TMDS Data2 Shield
Maximum cable length………...100 meters(330 feet)
3 TMDS Data 2- 4 TMDS Data 1+
Minimum output voltage……....0.6V p-p
5 TMDS Data 1 Shield 6 TMDS Data 1-
7 TMDS Data 0+ 8 TMDS Data0 Shield
General
9 TMDS Data 0- 10 TMDS Clock+ Power………………………………….internal or External 5V 1.2A DC
11 TMDS Clock Shield 12 TMDS Clock- Power Consumption………………Transmitter 0.55 watt
13 CEC 14 Reserved (N.C. on device) Receiver 0.55 watt
15 SCL 16 SDA Operating temperature range…0 to 50℃
17 DDC/CEC Ground 18 +5V Power Storage temperature range……-20 to 70℃
19 Hot Plug Detect
Dimensions
Transmitter /Receiver Module ….....61x 55x 25 (mm)
Trouble Shooting Module part(Transmitter & Receiver) ………….. 0.12 Kg/each
HDMI signals run a very high frequency and are especially susceptible to
bad video connections, too many adapters, or too long cables. To avoid Warranty………………………………1 years parts and labor
the loss of an image or image jitter, follow these guidelines:
Note Specifications are subject to change without notice.
l Do not use the copper HDMI cable different from enclosed cable.
HDMI signal can be worse by the cable.
l Use only cable designed for HDMI signals
l Limit or avoid the use of adapters
Specification
Video
Video Bandwidth…………………165MHz(VGA~UXGA, 1080p), Single Link
Pixel data bit depth……………..24 bits
Video Input
Input Signal .……………………..1 Single Link HDMI
Connector………………………..…1 HDMI Type A receptacle connector
Maximum Resolution……….….WUXGA(1920x1200) @ 60Hz, 1080p
Minimum Input Voltage……..…0.15V p-p
3