Академический Документы
Профессиональный Документы
Культура Документы
4
Firmware Update
Update PLC Firmware 4-2
Back Up PLC Firmware 4-4
Update LCD Touch Panel Firmware 4-5
Back Up LCD Touch Panel Firmware 4-6
4-1
Firmware Update
Front View
2 Turn off the power to the PLC by switching off MCB4 (Main Circuit
Breaker 4) which is found on the electrical panel.
3 Open the cover of the memory card slot on the PLC and insert the
memory card into the slot.
DIP Switches under this cover
Memory Slot
4 Open the cover above the memory slot to access the DIP switches.
DIP Switches
5 Turn on DIP switch 2 and 7.
6 Switch on MCB4.
The program is automatically downloaded to the PLC.
7 Wait for the BUSY and MCPWR lights to go off, then turn the PLC power
off.
Lights
Memory Slot
3 Open the cover above the memory slot to access the DIP switches.
2 Open the Zone 2 door. Insert the SD card into the card slot.
card slot
6 Press OK when completed. Remove the SD card and press ESC to return
to the Main menu.
5 Press OK to confirm.
6 When the backup is completed, press OK. Remove the SD card and
press ESC to return to the Main menu.