Академический Документы
Профессиональный Документы
Культура Документы
Job Title
Part of Structure
Client Prepared Date
Chk By 09-29-2017
1.0 Synopsis
Two proposed steel canopies to be built at 2/F and 1/F of Commerical Building at
Wing Hong Street and Yu Chau West Street, Cheung Sha Wan, Kowloon, N.K.I.L.6572.
Job Title
Part of Structure
Client Prepared Date
Chk By 09-29-2017
a. Structural Steel
i. All structural steel other than hollow section to be S275 class 1 to BS EN 10025 PART 2, 2004
ii. All structural hollow section to be S275 class 1 to BS EN 10210 PART 1, 1994
iii. The steel strengths = 275 MPa.
b. Welds
i. All welds to BS EN 1011 PART 1:1998 & PART 2:2001.
ii. The design strength of fillet welds stress = 220 MPa
c. Concrete
i. Design concrete grade for structural member to be Grade C45 with characteristic strength 45MPa.
d. Aluminum notes
i. All aluminum to be complied with BS 8118-Part 1:1991.
ii. Design stress for thickness up to 25mm
Density = 27.0kN/m³
Modulus of Elasticity = 70000MPa.
Modulus of Rigidity, G = 26600MPa.
Coefficient of Thermal Expansion = 23.0x10-6 /°C
iii. Limiting Stresses for heat-treatable alloys.
Aluminium Panel = 3003-H14
Limitng Stress for Bending and Overall Yielding, po = 125 MPa
iv. Deflection Limit = L/120
e. Bolts
ii. All Stainless Steel Bolts to be Grade Class-70, unless otherwise stated and comply with BS EN ISO 3506-1&2:1998
iii. Grade = Class 70
Shear Strength, ps = 311 MPa
Bearing Strength, pbb = 828 MPa
Tensile Strength, pt = 450 MPa
Page 3
2020-12-16 12:
Project: SECTIONS:
1 CSB2 D200x50x10x10
2 SB5 SHS50x5.0
Boundary Conditions:
3 SB6 RHS100x50x6.3~
i. all supports to be fixed end. 12 4 SB7 RHS100x50x5.0~
ii. members with "dotted" to be pinned end. 5 SB8 SD120x16
6 SB9 RHS100x50x5.0~
iii. all members except "dotted" to be inter-connect with rigid connections. 7 HP2 D100x50x12x12
10
15
Page 4
Z
Y X
Unit: N, mm
2020-12-16 12:
Project: SECTIONS:
1 CSB2 D200x50x10x10
2 SB5 SHS50x5.0
member design nodes - max capacity factor 3 SB6 RHS100x50x6.3~
(252) (275)
(276) 4 SB7 RHS100x50x5.0~
(134) 5 SB8 SD120x16
6 SB9 RHS100x50x5.0~
7 HP2 D100x50x12x12
(193)
(267)
(106)
Page 7
Z
Y X
Unit: kN, m