Академический Документы
Профессиональный Документы
Культура Документы
SYLLABUS
MASTER OF ENGINEERING PROGRAMME
IN
POWER ELECTRONICS AND INDUSTRIAL DRIVES
(4 SEMESTERS)
REGULATIONS 2010
SATHYABAMA UNIVERSITY FACULTY OF ELECTRICAL ENGINEERING
SATHYABAMA UNIVERSITY
REGULATIONS – 2010
Effective from the academic year 2010-2011 and applicable to the students admitted to the Master of Engineering
/ Technology / Architecture /Science (Four Semesters)
1. Structure of Programme
1.1 Every Programme will have a curriculum with syllabi consisting of theory and practical such as:
(i) General core courses like Mathematics
(ii) Core course of Engineering / Technology/Architecture / Science
(iii) Elective course for specialization in related fields
(iv) Workshop practice, Computer Practice, laboratory Work, Industrial Training, Seminar
Presentation, Project Work, Educational Tours, Camps etc.
1.2 Each semester curriculum shall normally have a blend of lecture course not exceeding 7 and practical
course not exceeding 4.
1.3 The medium of instruction, examinations and project report will be English.
2. Duration of the Programme
A student is normally expected to complete the M.E/M.Tech./M.Arch/M.Sc Programme in 4 semesters but in
any case not more than 8 consecutive semesters from the time of commencement of the course. The
Head of the Department shall ensure that every teacher imparts instruction as per the number of hours specified
in the syllabus and that the teacher teaches the full content of the specified syllabus for the course being
taught.
3. Requirements for Completion of a Semester
A candidate who has fulfilled the following conditions shall be deemed to have satisfied the requirement for
completion of a semester.
3.1 He/She secures not less than 90% of overall attendance in that semester.
3.2 Candidates who do not have the requisite attendance for the semester will not be permitted to
write the University Exams.
4. Examinations
The examinations shall normally be conducted between October and December during the odd semesters and
between March and May in the even semesters. The maximum marks for each theory and practical course
(including the project work and Viva Voce examination in the Fourth Semester) shall be 100 with the following
breakup.
(i) Theory Courses
Internal Assessment : 20 Marks
University Exams : 80 Marks
5. Passing requirements
(i) A candidate who secures not less than 50% of total marks prescribed for the course (For all courses
including Theory, Practicals and Project work) with a minimum of 40 marks out of 80 in the University
Theory Examinations, shall be declared to have passed in the Examination.
(ii) If a candidate fails to secure a Pass in a particular course, it is mandatory that he/she shall reappear
for the examination in that course during the next semester when examination is conducted in that
course. However the Internal Assessment marks obtained by the candidate in the first attempt shall
be retained and considered valid for all subsequent attempts.
6. Eligibility for the Award of Degree
A student shall be declared to be eligible for the award of the M.E/M.Tech./M.Arch./M.Sc degree provided the
student has successfully completed the course requirements and has passed all the prescribed examinations in
all the 4 semesters within the maximum period specified in clause 2.
All assessments of a course will be done on absolute marks basis. However, for the purpose of reporting the
performance of a candidate, Letter Grades will be awarded as per the range of total marks (out of 100) obtained
by the candidate as given below:
Σi C i GP i
CGPA =
Σ i Ci
1 A candidate who qualifies for the award of the Degree having passed the examination in all the
courses of all the semesters in his/her first appearance within a maximum period of 4 consecutive
semesters after commencement of study securing a CGPA not less than 9.0 shall be declared to
have passed the examination in First Class – Exemplary.
2. A candidate who qualifies for the award of the Degree having passed the examination in all the
courses of all the semesters in his/her first appearance within a maximum period of 4 consecutive
semesters after commencement of study, securing a CGPA not less than 7.5 shall be declared to
have passed the examination in First Class with Distinction.
3. A candidate who qualifies for the award of the Degree having passed the examination in all the
courses of all the semesters within a maximum period of 4 consecutive semesters after
commencement of study securing a CGPA not less than 6.0 shall be declared to have passed
the examination in First Class.
4 All other candidates who qualify for the award of the Degree having passed the examination in all
the courses of all the 4 semesters within a maximum period of 8 consecutive semesters after his/her
commencement of study securing a CGPA not less than 5.0 shall be declared to have passed
the examination in Second Class.
5 A candidate who is absent in semester examination in a course/project work after having registered
for the same, shall be considered to have appeared in that examination for the purpose of
classification of degree. For all the above mentioned classification of Degree, the break of study
during the programme, will be counted for the purpose of classification of degree.
6 A candidate can apply for revaluation of his/her semester examination answer paper in a theory
course, within 1 week from the declaration of results, on payment of a prescribed fee along with
prescribed application to the Controller of Examinations through the Head of Department. The
Controller of Examination will arrange for the revaluation and the result will be intimated to the
candidate concerned through the Head of the Department. Revaluation is not permitted for practical
courses and for project work.
Final Degree is awarded based on the following :
9. Discipline
Every student is required to observe disciplined and decorous behaviour both inside and outside the University
and not to indulge in any activity which will tend to bring down the prestige of the University. If a student
indulges in malpractice in any of the University theory / practical examination, he/she shall be liable for punitive
action as prescribed by the University from time to time.
The University may revise, amend or change the regulations, scheme of examinations and syllabi from time to
time, if found necessary.
SEMESTER I
Sl.No. SUBJECT CODE SUBJECT TITLE L T P C PAGE NO.
THEORY
1. SMTX5007 Advanced Mathematics 3 1 0 4 1
2. SEEX5001 Analysis of Rectifiers and Choppers 2 1 0 3 2
3. SEEX5002 Analysis of Inverters 3 1 0 4 3
4. SEEX5003 Special Machines and Their Controllers 3 0 0 3 4
5. SEEX5004 Advanced Power Semiconductor Devices 3 0 0 3 5
PRACTICALS
6. SEEX6501 Power Electronics Lab 0 0 4 2 9
TOTAL CREDITS: 19
SEMESTER II
Sl.No. SUBJECT CODE SUBJECT TITLE L T P C PAGE No.
THEORY
1. SEEX5005 Solid State DC Drives 3 1 0 4 6
2. SEEX5006 Solid State AC Drives 3 1 0 4 7
3. SECX5005 Embedded System Design 3 0 0 3 8
4. Elective I
5. Elective II
PRACTICALS
6. SEEX6502 Power Electronics Simulation Lab 0 0 4 2 9
TOTAL 19
CREDITS:
SEMESTER III
Sl.No. SUBJECT CODE SUBJECT TITLE L T P C PAGE No.
THEORY
1. SEEX5007 PWM Techniques in Power Electronics 3 0 0 3 10
2. SEEX5008 Power Electronics in Power Systems 3 0 0 3 11
3. SECX5015 DSP Based System Design 3 0 0 3 12
4. Elective III
5. Elective IV
PRACTICALS
6. SECX6513 Embedded and DSP lab 0 0 4 2 13
TOTAL CREDITS: 17
SEMESTER IV
Sl.No. SUBJECT CODE SUBJECT TITLE L T P C
1. S34XPROJ Project Work and Viva Voce 0 0 30 15
TOTAL CREDITS: 15
TOTAL CREDITS FOR THE COURSE: 70
ELECTIVES
THEORY
TEXT BOOKS :
1. Rashid M.H, “Power Electronics Circuits, Devices & Applications”, Prentice Halll of India, 3rd Edition, New Delhi, 2005,
2. P.S.Bimbra, “ Power Electronics”, Khanna Publishers, Eleventh Edition, 2003
REFERENCE BOOKS:
1. Mohan .N, Undeland & Robbins, “Power Electronics Converters, Application & Design”, John Wiley & Sons, Inc, 2nd Edition, Newyork,
2001
2. P.C Sen, "Modern Power Electronics”, Wheeler publishing Co, First Edition, New Delhi-1998.
3. M.D. Singh & K.B. Khanchandani, “Power Electronics”, Tata Mc Graw Hill Publishing Company Limited, 2nd Edition, 2009.
4. M.S.Jamil Asghar, “Power Electronics”, PHI Learning Private Ltd, 2004, (Seventh printing 2009).
5. V.R.Moorthi, “Power Electronics Drives, Circuits, and Industrial Applications,” Oxford University press, First published in India 2005,
TEXT BOOKS :
1. Rashid M.H, ‘Power Electronics – Circuits, Devices & Applications”, Prentice Hall of India, 3rd Edition, New Delhi, 2005.
2. P.S.Bimbra, "Power Electronics”, Khanna Publishers, Eleventh Edition, 2003
REFERENCE BOOKS:
1. Mohan .N, Undeland & Robbins, “Power Electronics – Converters, Application & Design”, John Wiley & Sons, Inc, 2nd Edition,
Newyork, 2001.
2. P.C Sen, "Modern Power Electronics", Wheeler publishing Co, First Edition, New Delhi-1998.
3. Rashid M.H., “Hand book on Power Electronics”.
4. M.D. Singh & K.B. Khanchandani, “Power Electronics”, Tata Mc Graw Hill Publishing Company Limited, 2nd Edition, Fourth Print
2009.
REFERENCE BOOKS:
1. Miller. T.J.E. “Brushless permanent magnet and reluctance motor drives”, Clarendon Press, Oxford, 1989.
2. Kenjo. T, “Stepping motors and their microprocessor control”, Clarendon Press, Oxford, 1989.
3. R.Krishnan, “Switched Reluctance Motor Drives – Modeling, Analysis and Control”, Prentice-Hall of India Pvt. Ltd., New Delhi, 2003.
4. J.F.Gieras, “Advancements In Electrical Machines”, Springer publisher Dec 2008
5. Kenjo, T and Nagamori, S, “Permanent Magnet and brushless DC motors”, Clarendon Press, Oxford, 1989.
6. K.Venkataratnam, “Special Electrical Machines”, University press Private Limited 2008.
7. V.V.Athani, “Stepepr Motors-Fundamentals, Applications and Design” New Age International (P) Limited, Publishers (2006)
TEXT BOOKS:
1. Mohan .N, Undeland & Robbins, “Power Electronics – Converters, Application & Design”, John Wiley & Sons, Inc, 2nd Edition,
Newyork, 2001.
2. Simon M.Sze & Kwok K.Ng, “Physics of semiconductor devices”, A Wiley Interscience Publication, John Wiley and Sons(2007),3rd
Edition.
REFERENCES:
1. Dieter K.Schroder, “Semiconductor Materiual and Device Characterization”, A John Wiley and Sons Inc Publication, IEEE press, 3rd
Edition 2006.
2. Robert F.Pierret, “Semiconductor Device Fundamentals”, Addition Wesly Publishing Company.
3. Donald A.Neamen, “Semiconductor Physics and Devices – Basic Principles”, Mc Graw Hill, 2003.
4. Robert.F.Pierret, “Advanced Semiconductor Fundamentals”, Prentice Hall Piblisher, 2nd Edition(2002).
REFERENCES:
1. Buxbaum.A, Schierau.K and Staughem, “A Design of Control Systems for D.C.Drives”, Springer - Verlag, Berlin, 1990.
2. Dubey .G.K , “Power Semiconductor Controlled Drives”, Prentice Hall International, New jersey, 1989.
3. Sen P.C, “Thyristor D.C Drives”, John Wiley & Sons, Newyork, 1981.
4. Subrahmanyam .V, “Electric Drives Concept and Applications”, Tata Mc Graw Hill Publishing Co., LTD., New Delhi, 1994.
5. Siemen’s Course Material
WEB SITES:
1. www.automation.siemens.com
2. www.legacypower.net
REFERENCE BOOKS:
1. Murphy,J.M.D, Turnbull F.G., "Thyristor control of AC motors”, Peramon Press, Oxford, 1988.
2. B.K.Bose, “Power Electronics & AC drives”, Dorling Kindersley India, 2002.
3. Dubey .G.K., “Power Semiconductor Controlled Drives”, Prentice Hall International, Newyork, 1989.
4. Dewan.S.B. Slemon, G.R. Straughen.A., “Power semiconductor drives”, John wiley and sons, Newyork, 1984.
5. I.J.Nagrath & D.P.Kothari, “Electrical Machines”, Tata Publications, 2nd Edition, Eighth Edition, Reprint 2001.
6. V.R.Moorthi, “Power Electronics Drives, Circuits, and Industrial Applications,” Oxford University press, First published in India 2005,
(sixth impression 2008).
REFERENCES:
1. Kenneth J. Ayala, "The 8051 Microcontroller Architecture Programming & Applications".
2. Myke Predko, "Programming & Customizing PIC Microcontrollers".
3. Zdravko Karakehayov, "Embedded System Design with 8051 Microcontrollers".
WEBSITES:
1. www.raisonance.com
2. www.ccsinfo.com
3. www.micrchip.com
4. www.atmel.com
LIST OF EXPERIMENTS
1. Single Phase Half and Full converter with R, RL, RLE loads.
2. Three Phase Half and Full converter with R, RL, RLE loads.
3. Voltage Commutated Chopper.
4. Current Commutated Chopper.
5. IGBT based speed control of three phase induction motor using PWM technique.
6. Three Phase AC voltage regulator.
7. Series Inverter.
8. Parallel Inverter.
9. McMurray - Bedford Inverter.
10. Resonant DC to DC Converter.
11. Study of Cycloconverters.
LIST OF EXPERIMENTS
1. Open Loop Control of Separately Excited DC Motor.
2. Open Loop Control of DC Series Motor.
REFERENCE BOOKS:
1. Mohammed H.Rashid, “Power Electronics – Circuits, Devices and Applications”, Eastern Economy Edition, Third Edition 2004.
2. Bimal K Bose, “Modern Power Electronics and AC Drives”, Pearson Education Asia, 2003.
3. Iss Batarseh, “Power Electronic Circuits”, John Wiley &Sons Inc. 2004.
4. Hamid A.Toliyat & Steven G.Campbell, “DSP Based Electro Mechanical Motion Control”, CRC press.
5. Grahame Holmes .D, Thomas A.Lipo, “Pulse Width Modulation for Power Converters, Principles and Practice” – IEEE Press – 2003.
6. F.Blaabjerg, J.K. Pedersen and P.Thoegersen, “Improved Modulation Techniques for PWM-VSI drive", IEEE Trans. On Industrial
Electronics, Vol.44, No.1, Feb 1997, pp.87-95.
REFERENCE BOOKS:
1. Miller.T.J.E, “Reactive power control in Electric Systems”, Wiley-Interscience, New York, 1982.
2. G.K.Dubey, “Thyristorised Power Controllers”, New Age International Publishers, 1st Edition (Reprint 2005).
3. Dr.P.S.Bimbhra, “Power Electronics”, Khanna Publishers, 3rd Edition, 2003.
4. P.C.Sen, “Power Electronics”, Tata Mc Graw Hill, 2008.
5. “Static compensator for AC power systems”, Prac.IEE Vol 128, pt.c, Nov 1981, pp362-406.
6. “A static alternative to the Transformers on Load tap Changing”, IEEE Trans. On PAS, Vol 101,Sep.1982,pp 3091-3095
REFERENCE BOOKS:
1. Hamid A. Toliyat, Steven G.Campbell, “DSP- based Electromechanical Motion Control”, CRC Press-2004.
2. Texas Instruments Inc, “Code Compare Studio white paper”, www.ti.com, Texas Instruments Literature number SPRA 520.
3. Texas Instruments Inc, “TMS320LF / L1240XA DSP controller reference Guide- System and peripheral”, www.ti.com, Texas Instruments
Literature SPRU357A.
4. Texas Instruments Inc, “TMS320LF / L1240XA DSP controller reference Guide- CPU and Instruction set”, www.ti.com, Texas
Instruments Literature SPRU357A.
A . EMBEDDED LAB
LIST OF EXPERIMENTS
b. Indirect Addressing.
5. State Machines
B. DSP LAB
LIST OF EXPERIMENTS
4. Study of six pulse PWM generation using full compare unit with dead band timer.
TEXT BOOKS:
1. Padiyar, K.R., “HVDC Power Transmission System”, Wiley Eastern Limited, New Delhi 1990. First Edition.
2. Edward Wilson Kimbark, “Direct Current Transmission”, Vol. I, Wiley Interscience, New York, London, Sydney, 1971.
REFERENCE BOOKS:
1. Rakosh Das Begamudre, “Extra high voltage AC transmission Engineering”, New Age International (P) Ltd., New Delhi, 2006
2. Arillaga, J., “High Voltage Direct Current Transmission”, Peter Pregrinus, London, 1998.
3. VIijay K. Sood, “HVDC & FACTS Controllers – Application of static converters in power system”.
4. Jos Arillaga, Y.H.Liu, N.R. Watson, “Flexible Power Transmission” – The HVDC option-John wiley & sons ltd, 2007.
TEXT BOOKS:
1. R. Mohan Mathur, Rajiv K. Varma, “Thyristor-based facts controllers for electrical transmission systems”, Wiley-IEEE, 2002.
2. K.R. Padiyar, “Facts Controllers in Power Transmission & Distribution”, New Age International Publishers.
REFERENCE BOOKS:
1. Enrique Acha, Claudio R. Fuerte-Esquivel, Hugo Ambriz-Perez, Cesar Angeles-Camacho, “FACTS: Modeling and Simulation in Power
Networks”, John Wiley & Sons Ltd., 2004.
2. S. Sivanagaraju, S.Sathyabarayana, “Electric Power Transmission and Distribution”, Pearson Education, 2009.
3. Kalyan K. Sen & Mey Ling Sen, “Introduction to FACTS controllers: Theory, Modeling, and Applications”, Wiley-IEEE, 2009.
4. Narain G. Hingorani, Laszlo Gyugyi, “Understanding FACTS: Concepts and Technology of Flexible AC Transmission Systems”, IEEE
Press Standard Publishers Distributors, 2000.
5. M.Noroozian et.al “Use of UPFC for optimal power flow control”, Transactions on Power Delivery, Vol.12, No.4, oct 1997, pp 1629-1634
REFERENCE BOOKS:
1. M.Gopal, “Modern Control Engineering”, Wiley, 1993, 2nd Edition.
2. John s.Bay, “Fundamentals of Linear State Space Syatems”, McGraw-Hill, 1999.
3. Eroni-Umez and Eroni, “System dynamics & Control”, Thomson Brooks/ Cole, 2002.
4. K. Ogatta, “Modern Control Engineering”, Pearson Education Asia, Low priced Edition, 2002, 4th Edition.
5. Charles L.Phillips & Royce D.Harbor, “Feedback Control Systems”, Prentice Hall Inc., 4th Edition 1999.
REFERENCE BOOKS:
1. Charles Kingsley, Jr., A.E.F Itzgerald, Stephen D.Umans, “Electric Machinery”, Tata Mcgraw Hill, Sixth Edition, 18th Reprint 2009.
2. R.Krishnan, “Electric Motor and Drives: Modelling, Analysis and Control”, Prentice Hall of India, 2nd Edition 2007.
3. Krans, “Electrical Machinery and Analysis”
4. R.Krishnan, “Switched Reluctance Motor Drives: Modelling, Simulation, Analysis, Design and Applications”, CRC Press- London.
5. C.V.Jones, “The United of Thoery of Electrical Machines”, Butterworth, London, 1967.
6. Miller, T.J.E. “Brushless permanent magnet and reluctance motor drives”, Clarendon Press, Oxford, 1989.
REFERENCE BOOKS:
1. Dr.Nazzareno Rossetti, “Managing Power Electronics: VLSI & DSP Driven Computer Systems”, A John Wiley & Sons, Inc., 2006.
2. Muhammad H.Rashid, “Power Electronics Hand BooK”, Elsevier Inc., 2nd Edition 2007.
3. Steve Doty, Wayne C.Turner, “Energy Management Hand Book”, The Fairmont Press, 7th Edfition 2009.
4. Paul R.Gray, Paul J.Hurst, Stephen H.Lewis and Robert G.Meyer “Analysis and Design of Analog Integrated Circuits”, John Wiley
& Sons, Inc., 2009.
5. Liv, Kramer, Indiver, Delbruck Douglors, “Analog VLSI: Circuits and Principles”, Massachusetts Institute of Technology, 2002.
REFERENCE BOOKS:
1. S.J Salon, “Finite Element Analysis of Electrical Machines”, Kluwer Academic Publishers, London, 1995.
2. S.R.H.Hoole, “Computer – Aided, Analysis and Design of Electromagnetic Devices”, Elsevier, New York, Amsterdam, London, 1989.
3. P.P. Silvester and Ferrari, “Finite Elements for Electrical Engineers”, Cambridge University press, 1983.
4. D.A.Lowther and P.P Silvester, “Computer Aided Design in Magnetics”, Springer verlag, New York, 1986.
5. A.K.Sawhney, “A Course in Electrical Machine Design”, Dhanpat Rai & Co, 5th Edition, Reprint 2002.
REFERENCE BOOKS:
1. Rajagoplan .V, “Computer aided analysis of power electronics systems”, Marcel Dekker Inc, USA 1987.
2. Krishnan .R, “Electric motor drives modeling analysis & control”, Prentice Hall of India Pvt Ltd, 2nd Edition 2007.
3. Van Valkenburg M.E, “Network Analysis”, 3rd Edition, Prentice Hall of India Pvt Ltd, New Delhi, 1990.
4. Simulink Reference Manual, Math Works, USA.
5. Tusim Reference Manual, Applied, USA.
REFERENCE BOOKS:
1. S.N.Sivanandam, S.Sumathi and S.N.Deepa, “Introduction to Neural Networks using MATLAB 6.0”, Mc Graw Hill Publishing companies
Limited, 3rd Edition 2008.
2. Lawrence V.Fansett, “Fundamentals of Neural Networks: Architectures, Algorithums & Applications”, Prentice Hall, 1994.
3. Simopn S.Haykin, “Neural Networks: A Comprehensive Foundation”, Macmillan,1994.
4. S.Rajasekaran, G.A.Vijayalakashmi Pai, “Neural Networks, Fuzzy Logic & Genetic Algorithams: Synthesis & Applications”, PHI, 3rd
Edition 2007.
5. S.N.Sivanandam & S.N.Deepa, “Introduction to genetic Algorithams”, Spinger Publications 2007.
REFERENCE BOOKS:
1. Rashid. M. H, “Power Electronics Handbook”, Academic press, 2001.
2. Erickson. R., Angkrtitrakul. S, Al – Nasean. O and Lujan. G, “Novel power electronics systems for wind energy applications” –
Final report, National Renewable Energy Laboratory, Colorado, US. – Aug 24, 1999 – Nov 30, 2002.
3. Rai. G. D, “Non conventional energy sources”, Khanna publishers, 4th Edition 2000.
4. B.H.Khan, “Non Conventional Energy Resources”, Tata Mc GrawHill, 2nd Edition 2006.
5. J.K.Manwell, J.G.McGowan, A.L.Rogers, “Wind energy explained – Theory Design and applications”, John Wiley & Sons, 2nd Edition
2009.
Protocols - layered approach - OSI model - DoD model - Hierarchical Approach - Local Network Technology -
Bus/Tree topology - Ring topology - medium access protocols - Details of IEEE 802 standards.
Switched Network Access - Packet Switched Network Access - Broadcast Network Access - Principle of
Internetworking - Bridges, Gateways -X, 75 - internet protocols - ISO Internet protocol standard.
Transport Service protocol Mechanisms - Network Service -Transport standards - Internet Transport protocols -
Wireless UDP - Overview of routing techniques.
Transfer Protocols - World Wide Web - Electronic Mail - Overview of ISDN - ISDN Protocols.
Architecture of network management - Fault management - Congestion Control Algorithms - Security Management.
REFERENCE BOOKS:
1. Stallings, "Data and Computer Communication", Maxwell and Macmillan, 1988.
2. Andrew Tannenbaum S., "Computer Networks", 3rd Edition, Prentice Hall of India, 1997.
3. Stallings, “Data and Computer Communication: Architectures, Protocols and Standards", IEEE Computer Society, 1987.
4. Kernel Texpian A.S., "Communication Network Management", Prentice Hall, 1992.
5. "Network Management", Standards, Uylers Black, McGraw Hill, 1995.
6. Commer and Stevens, "Internetworking with TCP/IP Vol.III: Client Server Server Programming and application", Prentice Hall, USA,
1994.
UNIT I 10 hrs.
The MOS transistor - Current Voltage Relations - Threshold Voltage - Second order effects - MOS models -
Design of Logic gates - Stick diagrams – DC characteristics – Small signal AC characteristics of CMOS inverter –
Dynamic behavior – Power consumption – Scaling of MOS circuits
UNIT II 10 hrs.
Design and Combinational and Sequential circuits – CMOS Inverter – Adders - Flip Flops - State machine
design using D Flip Flops – Design with JK Flip Flops and T Flip Flops – Design for PLD – ASM chart – Design
from an ASM chart – Clock skew – Initialization and lockout in state machines.
UNIT IV 10 hrs.
The Array Multiplier – Multiplier structures - Baugh-Wooly – Booth Multiplier – Barrel shifter – Memory structures
– SRAM and DRAM design – Design approach of Programmable logic devices – PLA, PAL and ROMs and EPROMs
- Programmable gate arrays and applications – CPLDS .
UNIT V 10 hrs.
FPGAs – Antifuse FPGA – Synthesis methods for FPGA – Electronically programmable functions – Basic
components – Arithmetic Logic Unit – Programmable register - Altera FPGA Architectures.
TEXT BOOKS:
1. Smith, “Application Specific Integrated Circuits”, Wesley, Second Print, 2000.
2. J.Bhasker, “VHDL Primer”, Prentice Hall, 1998.
REFERENCE BOOKS:
1. James, E.Palmer, David E Perlman, “Introduction to Digital System”, Tata McGraw Hill, 1996.
2. Kevin Skahill, "VHDL for Programmable Logic Devices”, Addison Wesley, 1996.
3. Stefan Sjoholm and Lennart Lindh, "VHDL FOR DESIGNERS", Prentice Hall, 1997.
4. Fabricious E Design Introduction to VLSI Design – MGH Co 1990.
5. Jan M . Rabaey. Digital Integrated Circuits : Pearsomn Education Ltd
6. Pucknell, Basic VLSI Design . PHI Ltd
TEXT BOOK:
1. Sergey Edward Lyshevski, "Nano and Microelectromechanical Systems", CRC Press Boca Raton London New York Washington,
D.C.
REFERENCE BOOKS:
1. Krause P. C. and Wasynczuk O., "Electromechanical Motion Devices", McGraw-Hill, New York, 1989.Lyshevski S. E.,
Electromechanical Systems, Electric Machines, and Applied Mechatronics, CRC Press, FL, 1999.
2. Lyshevski S. E. and Lyshevski M. A., “Analysis, dynamics, and control of micro-electromechanical systems,” Proceeding American
Control Conference, Chicago, IL, pp. 3091-3095, 2000.
3. Lyshevski S. E., "Integrated control of microactuators and integrated circuits: a new turning approach in MEMS
technology," Proceedings Conference Decision and Control, Phoenix, AZ, pp. 2611-2616, 1999.
4. Lyshevski S. E., “Micro-electromechanical systems: motion control of micro-actuators,” Proceedings Conference
Decision and Control, Tampa,FL, pp. 4334-4335, 1998.
5. N Maluf An Introduction to Microelectromechanical Systems Engineering, Artech House.
TEXT BOOK:
1. Peter J.Ashenden, "The Designer’s Guide to VHDL", Morgan Kaufmann Publishers, San Francisco, Second Edition, May 2001.
REFERENCE BOOKS:
1. Zainalabedin Navabi, "VHDL Analysis and Modeling of Digital Systems", McGraw Hill International Editions, Second Edition, 1998.
2. James M.Lee, "Verilog Quick start", Kluwer Academic Publishers, Second Edition, 1999.
UNIT III DIGITAL FILTERS AND FINITE WORD LENGTH EFFECTS 10 hrs.
FIR filters, FIR filter structures, FIR chips, IIR filters, Specifications of IIR filters, Mapping of analog transfer
functions, Mapping of analog filter structures, Multirate systems, Interpolation with an integer factor L, Sampling rate
change with a ratio L/M, Multirate filters. Finite word length effects - Parasitic oscillations, Scaling of signal levels,
Round-off noise, Measuring round-off noise, Coefficient sensitivity, Sensitivity and noise.
TEXT BOOK:
1. Lars Wanhammer, “DSP Integrated Circuits”, Academic press, New York.,1999.
REFERENCE BOOKS:
1. A.V.Oppenheim, etal, “Discrete-time Signal Processing” Pearson education, 3rd Edition, 2009.
2. Emmanuel C. Ifeachor, Barrie W. Jervis, “Digital signal processing – A practical approach”, Pearson Edition , 2nd Edition, 2009.
3. Keshab K.Parhi, “VLSI digital Signal Processing Systems design and Implementation”, John Wiley & Sons, 2nd Edition, 1999.
TEXT BOOK:
1. Jean J. Labrosse, “Embedded Systems Building Blocks: Complete and Ready-To-Use Modules in C”, CMP, 2nd Edition, 2009.
REFERENCE BOOKS:
1. Ball S.R., "Embedded microprocessor Systems – Real World Design", Prentice Hall, 2nd Edition, 1996.
2. Herma K, “Real Time Systems – Design for distributed Embedded Applications”, Kluwer Academic, 1st Edition, 1997.
3. Daniel W. Lewis, “Fundamentals of Embedded Software where C and Assembly meet”, PHI, 2nd Edition, 2002.