Академический Документы
Профессиональный Документы
Культура Документы
The ALUMINATOR FC Full Contact Floating Roof The bottom side of the roof is in complete
is a new approach to solving emission contact with the product, the top side is a deck
problems from large diameter above ground for foot and operator traffic. Panels are
storage tanks. The ALUMINATOR FC roof is specially designed for easy assembly and
completely vapor tight per API 19.2. welding in the field. Proprietary welding
techniques are used to seal weld the seams
The roof is composed of lightweight individual between the assembled panels. Upon
panel modules assembled to form a completion of the welding, the seal welds are
completely sealed full contact floating roof. vacuum box tested to insure vapor tightness.
Each individual panel is a self contained
floatation compartment. The complete HMT provides fully factory trained welding
assembled structure is extremely strong, stable, personnel equipped to perform the field
and safe for personnel access and complies welding for each installation.
entirely with the design requirements of API
650, Appendix H. Full contact roofs prevent vapor buildup under
the roof, greatly reducing emissions. As the
Structural strength of the roof is provided ALUMINATOR FC is totally seam welded, no
through mechanical fastening of the underside vapors, even in small amounts, can escape
of the panels, not through welding. Complete through the seams.
sealing in accordance with API 19.2 is provided
through welding of the top seams. Each Contact your local HMT Representative to
factory assembled panel module is tested in discuss the full suite of products and services
the shop to insure vapor tightness. The main that will satisfy all your AST needs.
panels are sized for easy handling in the field,
with special panels made around the perimeter
so that the completed structure fits any tank
diameter.
The ALUMINATOR™ FC's Unique • Full contact design increases safety against
Design Features Include the vapor ignition by external sources.
Following: • Fully factory trained welding personnel
• Fully welded construction with no field and specialized equipment are provided
bolted seams. Qualifies as a welded roof to perform the field welding for
under API 19.2 definitions. each installation.
• The assembled structure meets or exceeds • Utilized with an HMT Geodesic dome,
the design requirements of API 650 the ALUMINATOR FC provides maximum
Appendix H. vapor loss control coupled with added
storage capacity.
• 100% aluminum construction. Materials in
compliance with API 650 Appendix H.
HMT Inc.
23832 Tomball Parkway
Tomball, Texas 77375
Ph: +1.281.681.7000
Fax: +1.281.351.8589
Locations worldwide to service
all your AST needs.
Visit us at www.hmttank.com