Академический Документы
Профессиональный Документы
Культура Документы
i850 blinking 7 times i waste ink full..but clear the reset the waste ink counter is 4 times
not 3..=.= i know some manual is say 3 times but actually is 4..
now try press resume button 4 times..after that press the power button
i850 blinking 7 times i waste ink full..but clear the reset the waste ink counter is 4 times
not 3..=.= i know some manual is say 3 times but actually is 4..
now try press resume button 4 times..after that press the power button
I think I can clear up some of the problems that people are having using this function.
What you are doing is forcing the printer into "Service Mode". Here is how you do it.
Read this entire post and understand it before you try it.
1. Start with printer OFF
2. Hold down RESUME and then press and hold down POWER Button.
3. Release the RESUME but continue to hold down the power button
4. Press the RESUME twice, then release POWER button.
Now you have put the printer in Service Mode so it will accept Service commands. Here
is the list of Service commands;
To EXECUTE anyone of the above commands you "MUST Press the Power button one
time. Then the function will be executed. After that function has been executed the
printer will REMAIN in Service Mode,.. waiting for another command. You can only
execute one command at a time. If you are through with all the commands you want to
do, just press the power buttom one more time and it will turn the printer off and you will
be out of Service Mode. One more note. When you get the printer into Service MOde and
it is ready to accept a command, the green light will be on and steady. As you issue a
command by pressing the resume button, it will alternate the color from green to orange
with each press of the resume button. Remember, if you issue either one of the
commands to force a print make sure you have paper installed.
For all those people that could not get the "Waste Ink Reset" to work, it was because you
didn't do it right. It sounds complicated but it is actually very simple. You can do it with
one hand using your middle finger and you thumb,... that is if you know how to play a
piano.
1. Start with printer OFF
2. Hold down RESUME and then press and hold down POWER Button.
3. Release the RESUME but continue to hold down the power button
4. Press the RESUME twice, then release POWER button.
Now you have put the printer in Service Mode so it will accept Service commands. Here
is the list of Service commands;
1) With the printer power turned off, while pressing the Resume/Cancel button, press and
hold the Power button.
(DO NOT release the buttons. The Power LED lights in green to indicate that a function
is selectable.)
2) While holding the Power button, release the Resume/Cancel button. (DO NOT release
the Power button.)
3) While holding the Power button, press the Resume/Cancel button 2 times, and then
release both the Power and
Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and
Power LEDs light
alternately, Alarm in orange and Power in green, starting with Alarm LED.)
4) When the Power LED lights in green, press the Resume/Cancel button the specified
number of time(s)according to the function listed in the table below. (Each time the
Resume/Cancel button is pressed, the Alarm and
Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm
LED.)
Re: How to reset E,2,7 on Canon MP198 ... by edymallada (8/30/09 8:22
+/-
PM) reply
hello sir.. i tried resetting my waste ink counter.. when i follow your steps i could
only reach into service mode.. after that when i press resume button 4 times, it
doesnt show alternate orange and green light.. just the zero number on the lcd.. i
own a canon mp 198... thanks for your help...
help! hehehe..
+/
Re: How to reset E,2,7 on Canon MP198 ... by moe (8/30/09 9:42 PM)
-
reply
Did you read the part where you have to press the power button after you press the
resume 4 times?
Re: How to reset E,2,7 on Canon MP198 ... by edymallada (9/7/09 9:04 +/
AM) reply -
i've reached into service mode and pressed resume button 4 times, it doesnt show
alternate orange and green light.. just the zero number on the lcd.. so you asked me
to re-read and follow this:
"To EXECUTE anyone of the above commands you "MUST Press the Power
button one time. Then the function will be executed. After that function has been
executed the printer will REMAIN in Service Mode,.. waiting for another
command. You can only execute one
command at a time"
and so i did.. but none still.. maybe i got it wrong on this part also hehe!
Re: How to reset E,2,7 on Canon MP198 ... by jfriends24 (9/20/09 8:57 PM) + /
reply -
the above steps apply with my mp145 (it is now resetted) but i cant make it to work
with my mp198, anyone know how to do it on mp198? like edymallada, i've only
reached the service mode part but no response in other command (no alternate
green/orange light)...TIA!
Re: How to reset E,2,7 on Canon MP198 ... by Anonymous (12/1/09 6:01 +/
PM) reply -
eto na po ang resetter para wala nang mabiktima ung nananamantala jan.. hehehe
HAPPY PRINTING! :)
http://hotfile.com
+/
Re: Re: How to reset E,2,7 on Canon MP198 ... by moe (12/1/09 7:43
-
PM) reply
Downloaded the file and it seems to be what everyone is looking for.
Any posts after this will be deleted. Thanks for the upload.
Forum Moderator
Re: Re: How to reset E,2,7 on Canon MP198 ... by chech3 (12/2/09 4:33 +/
AM) reply -
how to use the said program?i alrady downloaded it, but everytime i click any
command, ders an error code of 006.. cna any one here knows how to use it?send
me please @ richard_ski3@yahoo.com..tnxx a lot guys...
Re: How to reset E,2,7 on Canon MP198 ... by Anonymous (12/6/09 11:02 +/
PM) reply -
1. Start with printer OFF
2. Hold down RESUME and then hold down POWER
3. Release RESUME
4. press RESUME twice, then release POWER
5. let green light blink until printhead has finished moving.
Re: How to reset E,2,7 on Canon MP198 ... by jfriends24 (12/11/09 9:06 +/
AM) reply -
WOW! Thanks to the uploader (Anonymous)...i really appreciated your
help...thanks alot! my MP198 is now resetted...
Re: How to reset E,2,7 on Canon MP198 ... by Anonymous (12/13/09 9:35 +/
PM) reply -
thank! its work
Re: How to reset E,2,7 on Canon MP198 ... by ronron6940 (12/13/09 9:37 +/
PM) reply -
thanks to the uploader its works!
Re: How to reset E,2,7 on Canon MP198 ... by Anonymous (12/13/09 11:34 + /
PM) reply -
tnx its work yeheyyyy
+/
thank u..... by xedry (12/14/09 9:21 AM) reply
-
thanks to the uploader now it works.....
Re: How to reset E,2,7 on Canon MP198 ... by Anonymous (1/1/10 8:37 +/
PM) reply -
HAAAY SALMAT PO NG MARAMI.
THANKS A LOT!!!!
+/
some question.... by vinsensius gonzales (1/9/10 12:38 AM) reply
-
i did as mr anonymous said, run the program in service mode, but what to chose??
once open the program i just choose main or platen in waste ink box??
after try chose one of them what should i do?? (an alarm beeping in orange right
after i chose either main or platen)
i click the power button and it said "afunction was canceled"
and eventought i already injected the ink, the printer status still said that i was out
of ink
Re: How to reset E,2,7 on Canon MP198 ... by Anonymous (1/12/10 9:15 +/
PM) reply -
salamat po ng marami...
anyone here have any idea how i can replace it without going to
canon?
up natin to
help!!!!!!!!!!!!!!!!!!!!!
@jayrecto
doon sa 950 pesos... hindi lang iyong waste ink pad ang
papalitan kung hindi iyon mismong buong mechanism kung
saan nagpapark iyong printhead mo for head cleaning... just like
what happend to my printer when the error waste ink tank full
appeared and fortunately under warranty pa printer ko...
@marlonization
@jcmarfilph
@adventure
@stac
:D
hirap explain pero i'm sure you'll understand pag ginawa nyo
na. madali lang.
@ tere_aguilar
nilinis ko nga din pala yung absorber. parang bago ulit yung
printer!
thanks..
sir,
patulong nman po kse po ung printer nmin canon pixma ip 1000
kpag nagpiprint po kmi ayaw po gumana ng black pero ok nman
po ung colored pag natetest kmi saka lng lumalabs ung black
, 2 years na ung printer ko, i usually put sum tissue paper ung
parang printhead stopper to absorb ung waste ink (dko lang
sure kung yun nga un pinaglalagyan ng ink)
Thanks