Академический Документы
Профессиональный Документы
Культура Документы
This chapter explains how to install Moldex3D R9.0 in PC with single CPU correctly.
Firstly, Chapter 2.1 gives the direction of how to install standalone type for a single CPU.
Chapter 2.2 demonstrates how to install floating type for a single CPU.
Contents 2. Installation of Moldex3D for pc with single cpu ......................................... 2-1
2.1 Standalone Type Installation .................................................................... 2-1
2.1.1 Get Started........................................................................................ 2-2
2.1.2 Rhino Installation.............................................................................. 2-4
2.1.3 Moldex3D-Mesh Installation ........................................................... 2-12
2.1.4 Moldex3D Installation..................................................................... 2-15
2.1.5 Standalone Hardware Driver Installation ........................................ 2-20
2.1.6 Standalone License Manager Installation ........................................ 2-23
2.1.7 Advanced/eDesign Samples Installation........................................... 2-28
2.2 Floating Type Installation ...................................................................... 2-33
2.2.1 For Server....................................................................................... 2-33
2.2.1.1 Get Started ...........................................................................................2-33
2.2.1.2 Moldex3D-LM Server Installation.........................................................2-38
2.2.1.3 Rhino-Zoo Installation ..........................................................................2-45
2.2.2 For Client ...................................................................................... 2-47
2.2.2.1 Get Started ...........................................................................................2-47
2.2.2.2 Rhino Installation .................................................................................2-50
2.2.2.3 Moldex3D-Mesh Installation.................................................................2-58
2.2.2.4 Moldex3D Installation ..........................................................................2-58
2.2.2.5 Moldex3D-License Tools Installation ....................................................2-59
2.2.2.6 Advanced/eDesign Samples Installation ................................................2-62
Chapter 2
There are two major types of Moldex3D R9.0 installation for PC with single CPU. One is
standalone type, and the other is floating type. Moldex3D setup mechanism will check
the modules needed to install automatically while users click the Setup function from the
installation disc and choose the specific type. Next, users just need to follow the
direction to finish the installation step by step. For further details of installation for PC
with single CPU, please see the following pages.
Remark: Since there is no difference in installation between 32-bit Windows and 64-bit
Windows, the installation wizard will check the system and install the right modules.
Some terms, like 32 bit or x86, will be shown, for the installation procedures in 32-bit
Windows are taken as examples described as below. User whose computer is 64 bit will
see terms, like 64 bit or x64 while installing.
• You have to login as the administrator of the system. If you are not the administrator, it
will not allow you to continue the installation.
The installation path of the destination folder should be as short as possible. Ex:
C:\
Please set the installation path as English characters not the local language ones.
Keeping more than one continuous spaces in the installation path is NOT
recommended, but just ONE space between each word is still allowed if it is
needed.
Step 1.1
After insert installation CD with auto-run, it activates the Moldex3D Setup Wizard. Of
course, users can click MdxSetup.exe to activate the Wizard as well. Following, click
Install button..
Step 1.2
After clicking Install button, Moldex3D Setup program will provide License Mode for users to
choose. Select Standalone and the program will detect Installation Modules automatically.
Step 1.3
Reconfirm the programs which you would like to install. Click Yes to continue, or No to return
the previous step.
Step 2.1
Click Install Rhinoceros 4.0.
Step 2.2
Click Next to continue.
Step 2.3
Click Accept to accept the License Agreement.
Step 2.4
Fill user’s name, organization and Rhino CD-Key. After entering the CD-Key, then click Next
to continue.
Step 2.5
Select Destination Folder and click Next to continue.
Step 2.6
Select the Installation Type. It is suggested to install Typical Type. Click Next to continue.
Step 2.7
Click Next to install the application.
Step 2.8
Perform the Installation.
Step 2.9
Step 2.10
Next Rhino 4.0 SR2 will be shown automatically. Select the language and click OK to
continue the installation.
Step 2.11
. Click Next to continue.
Step 2.12
Click Accept to accept the License Agreement
Step 2.13
Click Next to install the application.
Step 2.14
Click Finish to complete Rhino 4.0 SR2 installation.
Step 2.15
Click No to continue the following Moldex3D installation, or click Yes to restart the system for
updating Rhino 4.0 SR2.
Step 3.1
Click Next to start the installation.
Step 3.2
Click Yes to accept the License Agreement and continue the installation.
Step 3.3
Click Next to start copying files.
Step 3.4
Click Finish to complete Moldex3D-Mesh installation.
Step 4.1
Click Next to continue Moldex3D installation.
Step 4.2
Click Yes to accept the License Agreement and to continue the installation.
Step 4.3
Select the features that you would like to install. Click Next to continue.
Step 4.4
Click Next to start copying files.
Step 4.5
Click Finish to complete Moldex3D installation.
Step 5.1
InstalltShield Wizard starts to perform the installation. Click Next to continue.
Step 5.2
Select I accept the terms in the license agreement and click Next to continue.
Step 5.3
Select the setup type. You may keep the default setting, and click Next to continue.
Step 5.4
Click Install to begin the installation.
Step 5.5
Click Yes to accept the modification of firewall settings for continuing the Sentinel Protection
installation.
Step 5.6
Click Finish to complete Sentinel Protection Installation.
Step 6.1
Before Installing Moldex3D License Manager, please make sure MAC file is ready to import.
Click OK to continue.
Choose the location of Mac file to import, and it will run InstallShield Wizard automatically.
Step 6.2
Click Next to continue.
Step 6.3
Click Yes to accept the license agreement and continue the installation.
Step 6.4
Click Next to continue installing Moldex3D-LM after selecting features. You may keep the
default setting.
Step 6.5
Click Next to continue installing Moldex3D-LM.
Step 6.6
Click Finish to complete installing Moldex3D-LM
Step 6.7
The system will ask if you wan to check the available module license of Moldex3D now. Click
Yes to view the available module license of Moldex3D; click No to continue install
Advanced/eDesign Samples.
Remark: if you click Yes to view the available module license of Moldex3D, it will be shown
as below:
Step 7.1
Click Next to start installation.
Step 7.2
Click Yes to accept License Agreement.
Step 7.3
Click Next after selecting features. Users may keep the default setting.
Step 7.4
Start copying Files. Click Next to continue.
It keeps installing:
Step 7.5
Click Finish to complete the installation..
• You have to login as the administrator of the system. If you are not the administrator, it
will not allow you to continue the installation.
The installation path of the destination folder should be as short as possible. Ex:
C:\
Please set the installation path as English characters not the local language ones.
Keeping more than one continuous spaces in the installation path is NOT
recommended, but just ONE space between each word is still allowed if it is
needed.
Step 1.1
After insert installation CD with auto-run, it activates the Moldex3D Setup Wizard as shown
below. Of course, users can click MdxSetup.exe to activate the Wizard as well. Click Install
for following installing steps.
Step 1.2
Select Floating-Server and the program will detect Installation Modules automatically.
Then, click Install.
Step 1.3
Click Yes to continue after reconfirming the modules you want to install.
Step 1.4
Click Next to continue the installation of Sentinel Protection Installer 7.4.0.
Step 1.5
Select I accept the items in the license agreement to accept license agreement.
Step 1.6
Click Next after selecting Setup Type. It is suggested to select Complete Type to install fully.
Step 1.7
Select Install to continue.
Step 1.8
Click Yes to accept the modification of firewall settings for continuing the Sentinel Protection
installation.
Step 1.9
Click Finish to complete the installation
1.Click Yes if you already got MAC file and refer to Step 2.1 for continuing the installation.
2.Click No if you do not have MAC file yet, and follow the next procedures to get MAC file:
Once clicking No, there will be a warning dialog asking if executing MDX3DMachineInfo.exe.
Please click “Mail to Moldex3D”. A “MachineInfo.ini” will be mailed to us, and later when a MAC
file info will be mailed to users. While getting MAC file, please refer to Step 2.1 for continuing the
installation.
Step 2.1
Moldex3D-LM will be installed automatically after finishing Sentinel Protection Installation.
Please follow the steps to complete the installation.
Before Installing Moldex3D License Manager, please make sure MAC file is ready to import.
Click OK to continue.
Choose the location of Mac file to import, and it will run InstallShield Wizard automatically.
Step 2.2
Click Next to start InstallShield Wizard.
Step 2.3
Click Yes to accept License Agreement.
Step 2.4
Step 2.5
Start copying Files. Click Next to continue.
Step 2.6
Step 3.1
Rhino-Zoo 4.0 Setup program is shown after installing Moldex3D-LM. Click Next to continue.
Step 3.2
Choose destination location or keep the default setting, and then click Next.
Step 3.3
Click Next to continue the installation of Rhino Zoo 4.0.
Step 3.4
Click Finish to complete the installation.
• You have to login as the administrator of the system. If you are not the administrator, it
will not allow you to continue the installation.
The installation path of the destination folder should be as short as possible. Ex:
C:\
Please set the installation path as English characters not the local language ones.
Keeping more than one continuous spaces in the installation path is NOT
recommended, but just ONE space between each word is still allowed if it is
needed.
Step 1.1
After insert installation CD with auto-run, it activates the Moldex3D Setup Wizard as shown
below. Of course, users can click MdxSetup.exe to activate the Wizard as well. Click Install
to continue.
Step 1.2
Select Floating-Client and the program will detect Installation Modules automatically.
Then, click Install to continue.
Step 1.3
Step 1.4
The installation system will ask the user to set the server information first before keeping
installing modules mentioned above. Click OK to continue.
Step 1.5
Please fill IP Address of the server with Moldex3D License Manager and keep the default
setting of port. Then, click OK to continue.
Fig 2-79 Moldex3D Installation: fill in the blanks with Server’s IP Address
Step 2.1
Step 2.2
Step 2.3
Choose Agree to accept the license agreement.
Step 2.4
Fill Full Name and Organization.
Then, check Use CD-Key from Zoo License Server and click Next to continue.
(Because the Server has already Key-pro, and Client PC needs only connect to Server)
Step 2.5
Click Next to continue after selection destination folder or keeping default setting.
Step 2.6
Select Installation Type allows the user to choose one of two type to install (It‘s up to the
user’s need). It is suggested to select Typical for installing fully. Then, click Next to continue.
Step 2.7
Step 2.8
Click Finish to complete the installation of Rhino 4.0.
Step 2.9
. Next Rhino 4.0 SR2 will be shown automatically. Select the language that you want. Click
OK to continue the installation.
Step 2.10
. Click Next to continue.
Step 2.11
Click Agree to accept the License Agreement.
Step 2.12
Click Next to install the application.
Step 2.13
Click Finish to complete Rhino 4.0 SR2 installation.
Step 5.1
InstallShield Wizard for Moldex3D-License Tools
Step 5.2
Step 5.3
Click Next to continue after selecting features or keep the default setting.
Step 5.5
Step 6.1
Click Next to start installation.
Step 6.2
Click Yes to accept License Agreement.
Step 6.3
Click Next after selecting features. Users may keep the default setting.
Step 6.4
Start copying Files. Click Next to continue.
It keeps installing:
Step 6.5
Click Finish to complete the installation..