Академический Документы
Профессиональный Документы
Культура Документы
Configurable Programmable
ECC-VAV-N
ECP-VAV-N
ECC-VAVS
ECP-VAVS
ECC-VVTS
ECC-VAV
ECP-VAV
ECC-VVT
ECP-VVT
Inputs
Universal 2 4 2 4 4 2 4 4 4
Software configurable
Built-in flow sensor (0-1 in. W.C.) ─ ─ ─
1 1 1 1
EC-Smart-Sensor capability
2 1 1 1 1
Optional wireless inputs 4 6 4 6 6 14 14 14 14
Analog/digital converter (bit) 16 16 16 16 16 16 16 16 16
Outputs
Universal (analog) ─ 2 ─ 2 2 ─ 2 2 2
Digital (triac) 2 4 2 4 4 2 4 4 4
LED 1 ─ 1 ─ ─ 1 ─ ─ ─
Output Occupancy LED (10V DC) ─ ─ ─ ─ ─ ─
Built-in actuator (with feedback) ─ ─
Digital/analog converter (bit) 10 10 10 10 10 10 10 10 10
Power Input
24V AC
Software
EC-Program ─ ─ ─ ─ ─
EC-gfxProgram ─ ─ ─ ─ ─
Recommended Applications
Cooling only VAV box
Cooling with reheat VAV box
Cooling with reheat VAV box & perimeter
heating
Parallel fan VAV box
Series fan VAV box
3
Dual duct VAV box
Large damper > 35 in-lb (4Nm) VAV box
Existing damper actuator
Room pressurization
1.
Only available through the EC-gfxProgram graphical programming tool.
2.
Wireless inputs are available when the controller is connected to a Wireless Receiver.
3.
Two controllers are required.
ECC-VAV-N
ECC-VAVS
ECC-VVTS
ECC-VAV
ECC-VVT
Heating Output Configuration
Duct / primary stages 2 4 2 4 4
Perimeter / secondary stages 2 4 2 4 4
Duct modulating valve
Perimeter modulating valve
Duct floating actuator valve
Perimeter floating actuator valve
Cooling Output Configuration
Duct / primary stages 2 4 2 4 4
Secondary stages ─ ─ ─ ─ ─
Duct modulating valve
Duct floating actuator valve
Reversing valve (heat pump) ─ ─ ─ ─ ─
Heat pump condenser water pump ─ ─ ─ ─ ─
Heating / Cooling Output Configuration (2 pipes)
On / off (2 position)
Duct modulating valve
Duct floating actuator valve
Other
Ability to use spare inputs
Network outputs (using NVOs) 2 6 2 6 6
Ability to use spare outputs
External damper control (modulating / floating) ─ ─
Box flow (differential pressure) ─ ─
C02 Level ─ ─
Application name:
VAV, FCU, HPU, UV, PFCU, PTU, Etc.
Number:
203
0: UO
1: ½ DO, ½ UO
2: DO
3: Other output cfg.
0: Standard
1: With HOA
2: Inputs only
3: Outputs only
Application size
1: ≤10 points
2: 11-15 points
3: 16-20 points
4: 21-25 points
5: 26-30 points
6: >30 points
C: Configurable
P: Programmable