Академический Документы
Профессиональный Документы
Культура Документы
1 UPGRADE INSTRUCTION.............................................................................................................3
2 VERSION INTRODUCTION........................................................................................................4
3 UPGRADE PREPARATION.........................................................................................................4
4 UPGRADE INTRODUCTION......................................................................................................4
5 UPGRADE OPERATIONS............................................................................................................5
6 UPGRADE VALIDATE.................................................................................................................7
1 Upgrade instruction
This is software version for P7-L10C900B832, please operate after read the upgrade
guideline carefully.
a. Before upgrade, please guarantee the version you use is Huawei official
This software suits to P7-L10 product, it can only use for P7-L10 product, and it
may cause can’t power on if you use this software on other product.
Any problems caused by user don’t follow the instructions, Huawei will
Back up your personal data before upgrade, the upgrade process will wipe all user
data.
To make sure that the power of the battery is enough to run the upgrade process.
Maybe you can connect the handset with the charger or the USB data cable to provide
power.
2 Version introduction
P7-L10V100R001C00BXXX
P7-L10V100R001C900BXXX
The P7-L10 handset software should be updated with the MICRO SD card.
File Name
3 Upgrade preparation
Make sure that the MICRO SD card is available and can be read and write.
1. According to the chapter 3.0., check the software package date and the file size.
4 Upgrade introduction
There are two methods to upgrade: normal upgrade and force upgrade.
Normal upgrade needs to start the handset and enter the Setting module. Force
upgrade is often used when the handset can’t boot up or can’t enter the idle screen. If
need force upgrade, please pull out the battery and set again.
5 Upgrade operations
Notices:
1. Upgrade will erase the user data, please backup your data before upgrade.
Step 3. Make sure that there is an UPDATE.APP under the dload. Copy the Main
Step 4. Make sure your handset is power off. Insert the MICRO SD card into the
handset. Pressing the VOLUME UP key and VOLUME DOWN key, then press
the POWER key to power on the phone, and VOLUME UP key and VOLUME
DOWN key should be pressed more than 10 seconds, then enter the Software
Upgrade Mode.
Step 3. Make sure that there is an UPDATE.APP under the dload. Copy the Main
Step 4. Insert the MICRO SD card into the handset and power on. After entering
pictures.
card.
Step 4. Insert the MICRO SD card into the handset and power on. After entering
pictures.
6 Upgrade validate
By Setting ->About phone->Build number, to check the version. Just like the picture
below:
Build number:P7-L10C900B832
If you still can’t solve the problem, Please send it to the nearest service center.