Академический Документы
Профессиональный Документы
Культура Документы
Technical Training
Contents
1 Installation .......................................................... 5
1.1 System requirements.................................................. 5
1.2 System permissions .................................................... 5
1.3 Core software modules (flat parts, tubular parts,
administration) ....................................................... 6
1.3.1 Installing the core software modules ................................ 6
1.3.2 Bysoft database............................................................. 7
1.4 Bending modules ........................................................ 8
1.4.1 Installing the bending modules ........................................ 8
1.5 3rd-party modules ...................................................... 9
1.5.1 Installing the 3rd-party modules ...................................... 9
2 Update ............................................................... 10
2.1 System permissions .................................................. 10
2.2 Core software modules (flat parts, tubular parts,
administration) ..................................................... 11
2.2.1 Bysoft database backup ................................................ 11
2.3 Updating the core software modules ........................ 13
2.4 Bending modules ...................................................... 14
2.4.1 BOS database backup .................................................. 14
2.4.2 Updating the bending modules ...................................... 15
2.4.3 Updating the machine software ..................................... 16
2.5 3rd-party modules .................................................... 17
3 Service packs..................................................... 18
3.1 System permissions .................................................. 18
3.2 Bysoft service pack ................................................... 18
3.3 BOS Base / MMC Bybend .......................................... 20
1 Installation
Function Permission
Installation Local administrator
The core software contains all the modules required for administration
and machining flat parts and tubular parts:
- Bybase - Byparam
- Bypart - Byview
- Bywork - Byorder
- Bytubepart - Bysort
- Bytubework - BYDBA
- Byconvert - TAR Editor
Please use the correct Bysoft installation CD to ensure you install the
correct version of Bysoft.
Installation:
1. Bysoft 6.x.x
2. License Manager
Please note:
The core software modules must always be installed.
6 05_02_InstallationBysoftComponents_V03A_en.doc
ByAcademy
Technical Training
Please note:
Instructions on how to install and activate the License
Manager are given in a separate document.
“C:\WINDOWS”
“C:\ProgramData\Bystronic\Bysoft6”
The bending software contains all the modules for 3D/2D bending-part
design and bending technology. These are additional modules to the core
software:
Installation:
2. 3rd-party programs
3. Designer / Unfolder
8 05_02_InstallationBysoftComponents_V03A_en.doc
ByAcademy
Technical Training
- Logitrace - NC Converter
Logitrace
1. 3rd-party programs
2. HVAC Logitrace
NC Converter
1. 3rd-party programs
2. NC Converter
2 Update
Please note:
Bystronic strongly recommends performing a Bysoft and
BOS database backup before EVERY update.
Function Permission
Update Local administrator
10 05_02_InstallationBysoftComponents_V03A_en.doc
ByAcademy
Technical Training
“C:\WINDOWS”
“C:\ProgramData\Bystronic\Bysoft6”
1.
Open the bysoft6.ini file using a
text editor (e.g. Windows Notepad)
2.
Look in the [Directories] section
to find the backup paths of the
database folders
3.
Use Windows Explorer to open the
backup paths and create a backup
of the folders.
Please note:
If working documents or Technology Wizards have been
modified to work with, it is best to back up the reports and
techassist folders as well.
12 05_02_InstallationBysoftComponents_V03A_en.doc
ByAcademy
Technical Training
Please use the correct Bysoft installation CD to ensure you install the
correct version of Bysoft.
The installation procedure for the update is the same as for a new
installation (see page 6), although the following points should be
noted:
During the update, Bysoft may want to install the software in a new
folder (e.g. “C:\Program Files\Bysoft6_2”).
To avoid working with more than one version of Bysoft by mistake, it is
best to change the installation folder to the standard default folder:
Bysoft -> C:\Program Files\Bysoft6
Please note:
The database folders database, partroot and workroot
are not changed during the update.
All the other folders for reports and techassist are
overwritten.
1.
Open the BOSDBA.exe program
2.
Look in the Configuration
section to find the backup paths
of the database folders
3.
Use Windows Explorer to open the
backup paths and create a backup
of the folders.
Please note:
As an extra safeguard, Bystronic recommends using the
BOS Administrator program and its XML Export Wizard
to export the entire machine configuration including
backgauge fingers, tools and material curves.
14 05_02_InstallationBysoftComponents_V03A_en.doc
ByAcademy
Technical Training
2.4.2 Updating the bending modules
Please use the correct Bysoft installation CD to ensure you install the
correct version of Bysoft.
The installation procedure for the update is the same as for a new
installation (see page 8), although the following points should be
noted:
In the Update process, it is best to select the option “use existing BOS
database” in order to continue using the existing bending data.
Once the installation has finished, the old BOS database contents must
be updated:
7.6.0 Xpert/Hämmerle 3P
6.8.2 7.6.0 01.21.0004
2.9.0 Hämmerle P21
7.5.0 Xpert/Hämmerle 3P
6.8.1 7.5.0 01.20.0003
2.8.0 Hämmerle P21
7.4.0 Xpert/Hämmerle 3P
6.8.0 7.4.0 01.18.0011
2.7.0 Hämmerle P21
7.3.0 Xpert
6.7.5 7.3.0 01.18.0001
2.6.0 Hämmerle P21
7.2.0 Xpert
6.7.4 7.2.0 01.18.0001
2.5.0 Hämmerle P21
Please note:
This document does not explain how to update the MMC
Bybend machine software, because there is a separate
document written expressly for this procedure.
16 05_02_InstallationBysoftComponents_V03A_en.doc
ByAcademy
Technical Training
The procedure for updating the “Logitrace” and “NC Converter” third-
party modules is identical to that for a new installation (see page 9).
3 Service packs
Minor changes and fixes are usually dealt with by providing free service
packs. We issue separate service packs for Bysoft and BOS Base/MMC
Bybend.
Please note:
Service packs are sent directly from Bysoft Support to the
relevant branch office on request (e.g. by email or
Bystronic ticket download).
Function Permission
Service pack installation Local administrator
1.
Save the service pack locally on
the PC and select the correct
language folder.
18 05_02_InstallationBysoftComponents_V03A_en.doc
ByAcademy
Technical Training
2.
Select the entire contents of the
folder and copy to the clipboard
3.
Paste the copied files into the
Programs directory of the Bysoft6
installation folder, overwriting the
existing files.
Default:
“C:\Program
Files\Bysoft6\programs”
Please note:
There is no automatic setup for the Bysoft service packs, so
they need to be “installed” using copy and paste. Usually
there are just a few files involved, which can easily be
copied.
This section describes how to install a BOS Base / MMC Bybend service
pack:
1.
Save the service pack locally on
the PC.
2.
Select the entire contents of the
folder and copy to the clipboard
3.
Paste the copied files into the
Programs directory of the Bending
installation folder, overwriting the
existing files.
Default:
“C:\Program
Files\Bending\programs”
Please note:
There is no automatic setup for the BOS Base / MMC
Bybend service packs, so they need to be “installed” using
copy and paste. Usually there are just a few files involved,
which can easily be copied.
20 05_02_InstallationBysoftComponents_V03A_en.doc