Академический Документы
Профессиональный Документы
Культура Документы
INFORMATION BROCHURE
Sponsored by
Admission coordinated by
1
Dear Prospective QIP Scholar
Your interest in the Quality Improvement Programme (QIP)’ sponsored by AICTE is appreciated. As you may be aware, the main
objective of the programme is to upgrade the expertise and capabilities of the faculty members of the AICTE approved degree-
level engineering institutions, National Institutes of Technology (NITs) and National Institute of Technical Teachers Training and
Research (NITTTRs) of the country. The programme launched by the Government of India in the year 1970, is now being
implemented and monitored by the National QIP Coordination Committee, funded through the AICTE.
There are three main activities under QIP serving the faculty of degree-level engineering institution:
• Providing opportunities to teachers of the degree-level engineering institutions to improve their qualifications by offering
admissions to Master and Ph.D degree programmes.
• Organizing Short Term Courses at the QIP Centres for serving teachers.
• Curriculum Development Cell activities which help to improve class room teaching and learning.
Eight major QIP centres at IITs and IISc undertake the various activities listed above. Admission to Master and Ph.D. programmes
are also offered in selected areas in institutions recognized as Minor QIP centres. A large number of teachers from engineering
institutions from all over the country have pursued Master and Ph.D degree programmes under this scheme. These are aimed at
improving the standard and quality of technical education through improvement of the qualifications of the faculty members of the
various engineering institutions.
The Curriculum Development Cells have been set up at major QIP Centres for improving the effectiveness of technical educations
in the country. The activities include curriculum development and revision or preparation of monographs, textbooks, teachers’
manuals, teaching aids and other resource materials, examination reforms, organizing inter-institutional programs, seminars,
workshops and panel discussions, development of educational technology, creation of methodologies for formal and informal
trainings, technical education of the handicapped, etc. A number of short term courses have also been organized by major QIP
Centres for the benefit of the faculty members, of Engineering Institutions across the country.
Access to the on-line submission of application opens on September 14, 2009 (Monday). The last date for on-line submission of
the application is October 16, 2009 (Friday). Please note that the last date for the receipt of the hard copy of application in the
office of the Principal Coordinator QIP, IIT Roorkee is October 23, 2009 (Friday).
The schedule of interviews at various QIP Centres is given in the QIP site as well as in the brochure, so that you can plan your
travel for attending the interviews at places of your choice. For further information about the QIP, the application form or any
associated item, you may contact the Principal coordinator QIP or any of the Coordinators of the QIP Centres listed in the website
and brochure.
For further information about a particular institution or a particular department therein, you may directly write to the Head of
concerned department or the QIP Coordinator of the institution.
2
I. GENERAL INFORMATION
1. The major QIP Centres at IITs and IISc offer admission to Master degree programmes in several disciplines. In
addition, institutions recognised as the minor QIP Centres also offer admission to Master degree programmes
under QIP in some specific departments.
2. The duration of the Master Degree Programme is 24 months.
3. Candidate should visit the website http://www.iitr.ernet.in for submitting on-line application, updated information
relating to receipt of completed application, candidates called for interview, selected list of candidates and all
other information pertaining to QIP admission.
4. Candidate should read the Brochure thoroughly before i) filling in the on-line application and ii) sending the
final print-out of applications (duly forwarded by the Head of Institution).
5. Candidates have to first submit their application form on-line through http://www.iitr.ernet.in/qip_admissions_09.
Applications without on-line submission will not be considered. Candidate should make sure that proper Institute /
Discipline codes are entered, all relevant details are duly filled in the respective fields. Access to on-line
submission of application opens on September 14, 2009 (Monday). Last date for on-line submission of
application is October 16, 2009 (Friday).
6. After filling the application on-line, candidates should send the relevant number of printed version of the on-line
completed form, duly forwarded by the Principal/Head of the Institution, as instructed along with all enclosures
and a DD for Rs.500/- (Rs.250/- for SC/ST/PD) drawn in favour of ‘IIT Roorkee QIP’, payable at Roorkee, to
The Principal Coordinator QIP, Quality Improvement Programme Centre, IIT Roorkee, Roorkee – 247 667
(Uttarakhand).
7. The candidate and the Principal/Head of the Institution forwarding the application should ensure that the
application is sent to the Principal Coordinator QIP so as to reach on or before October 23, 2009 (Friday).
Applications received after this date will not be considered. On receipt of the applications,
acknowledgement will be sent by email.
8. Information given by the candidate in all application print-outs should be same. In case of any difference
observed in the data relating to experience, marks, designation, addresses, age etc., his/her candidature is liable
to be cancelled at any stage even after selection/ admission.
9. Conditional recommendation by the Principal/Head of the Institution will not be accepted. Applications
submitted without signatures of the candidate and the appropriate authorities with seal, and/or without
the required enclosures will automatically be rejected.
10. The application number allotted during on-line registration should be quoted in all correspondences, and such
correspondences should be routed through the Principal/Head of the candidate’s parent institution. The
application number may be changed in some unavoidable circumstances and will be intimated through email in
such cases.
11. Short-listed candidates will receive Interview Call/Admission letter from the respective QIP Coordinator of the
Institute, where they have applied to seek admission. The Principal Coordinator QIP will not send any Call letter
to the candidates directly.
12. Interview schedule is final and cannot be altered/changed under any circumstances. Candidate has to appear
for interview at the Institute(s), where he/she would like to seek admission. Candidates may plan their travel
accordingly.
13. Concessions, relaxation, and reservations for candidates belonging to SC/ST/OBC/Physically Disabled/Female
candidates are as per rules.
3
II. INSTITUTIONS OFFERING MASTER DEGREE PROGRAMMES UNDER QIP AND THEIR CODES
S No. Name of the Institute/University Code
Institutions having Major QIP Centres: The following institutions having QIP Centres which offer admission to Master degree (2-years)
Programmes in several disciplines existing in those institutions.
1. Indian Institute of Science, Bangalore – 560012 BG
2. Indian Institute of Technology Bombay, Mumbai – 400076 BM
3. Indian Institute of Technology Delhi, New Delhi – 110016 DL
4. Indian Institute of Technology Guwahati, Guwahati – 781039 GW
5. Indian Institute of Technology Kanpur, Kanpur – 208016 KN
6. Indian Institute of Technology Kharagpur, Kharagpur – 721302 KH
7. Indian Institute of Technology Madras, Chennai – 600036 MD
8. Indian Institute of Technology Roorkee, Roorkee – 247667 RR
Other Institutions having Minor QIP Centres: The following recognized institutions also offer admission to Master Degree (2 years) Programmes
under QIP in some specific departments as given below:
9. Anna University, College of Engineering Campus, Chennai – 600025 AU
(i) Civil Engg., (ii) Electrical Engineering, (iii) Information and Communication Engineering, (iv) Mechanical Engineering
Anna University, AC Technology Campus, Chennai – 600025
(i) Chemical Engg. (ii) Leather Technology
Anna University, Madras Institute of Technology, Chennai – 600044
(i) Aerospace Engineering, (ii) Automobile Engineering,
(iii)Electronics Engineering, (iv) Instrumentation Engineering
(v) Production Technology
10. Bengal Engineering and Science University, Howrah – 711103 BE
(i) Civil Engineering (ii) Electrical Engineering (iii) Mechanical Engineering (iv) Mining Engg.
11. B.M.S. College of Engineering, Bangalore – 560 019 BS
(i) Machine Design
12. Indian School of Mines, Dhanbad – 826 004 IS
(i) Fuel and Mineral Engineering (ii) Mining Engineering
13. Institute of Technology, BHU, Varanasi – 221 005 VN
(i) Metallurgical Engineering (ii) Mining Engineering
14. Jadavpur University, Kolkata – 700 032 JU
(i) Electrical Engineering (ii) Electronics & Telecommunication Engineering (iii) Mechanical Engineering (iv) Production
Engineering
15. Malnad College of Engineering, Hassan – 573 201 ML
(i) Civil Engineering
16. Motilal Nehru National Institute of Technology, Allahabad–211004 MN
(i) Applied Mechanics (ii) Civil Engineering (iii) Computer Science and Engineering (iv) Electrical Engineering (v)
Electronics Engineering (vi) Mechanical Engineering
17. National Institute of Industrial Engineering, Mumbai – 400087 NI
(i) Industrial Engineering
18. National Institute of Technology, Calicut - 673 601 CL
Offer admission to Master degree programmes in several disciplines
19. National Institute of Technology Karnataka, Surathkal – 575025 SK
Offer admission to Master degree programmes in several disciplines
20. National Institute of Technology, Rourkela – 769008 RK
(i) Ceramic Engineering (ii) Chemical Engineering (iii) Civil Engineering (iv) Computer Science and Engineering (v)
Electrical Engineering (vi) Electronics and Communication Engineering (vii) Mechanical Engineering.
21. National Institute of Technology, Tiruchirappalli – 620025 TR
(i) Civil Engineering (ii) Computer Science & Engineering (iii) Electrical and Electronics Engg.
(iv) Mechanical Engineering (v) Metallurgical Engineering (vi) Production Engineering
22. National Institute of Technology, Warangal - 506004 WR
(i) Civil Engg. (ii) Electrical Engg. (iii) Electronics & Communication Engg. (iv) Mechanical Engg.
23. PSG College of Technology, Coimbatore – 641004 PS
(i) Computer Science and Engineering (ii) Electrical and Electronics Engineering (iii) Mechanical Engineering (iv)
Production Engineering (v)Textile Technology
24. Shri G. S. Institute of Technology and Science, Indore – 452003 GS
(i) Electrical Engineering
25. Shri Jayachamarajendra College of Engineering, Mysore - 570006 SJ
(i) Civil Engineering (ii) Electronic and Communication (iii) Instrumentation Technology
(iv) Mechanical Engineering
26. University Visveswaraya College of Engineering, Bangaluru – 560056 UV
(i) Civil Engineering
27. Visvesvaraya National Institute of Technology, Nagpur – 440011 VR
(i) Civil Engineering (ii) Electrical Engineering
4
III. CODES FOR DEPARTMENTS OFFERING MASTER DEGREE PROGRAMMES AT VARIOUS INSTITUTIONS
5
Department Code Institution(s) Offering Master Degree Programme
Industrial Engineering IE NI
Industrial Engineering and Management IM KH
Industrial Tribology and Maintenance Engg., TR DL
Information and Communication Engineering IC AU
Instrumentation IN BG
Instrumentation Technology IN SJ
Instrumentation Engineering IE AU
Internet Science and Engineering IS BG
Laser Technology LS KN
Leather Technology LT AU
Machine Design MD BS
Material Science MS KH, KN
Materials and Metallurgical Engineering MT KN
Mathematical and Computational Sciences MC SK*
Mathematics MA DL, KH, MD
Mechanical and Industrial Engineering ME RR
Mechanical Engineering ME AU, BE, BG, BM*, CL*, DL, JU*, GW*, KH*, KN,
MD*, MN, PS*, RK*, SJ, SK*, TR*, WR
Metallurgical and Materials Engineering MT KH, SK*
Metallurgical and Materials Engineering MM MD
Metallurgical Engineering & Materials Science MM BM*
Metallurgical Engineering MT TR*, VN
Metallurgical Engineering and Material Engineering MT KH, RR
Materials Engineering MT BG
Microelectronic System ML BG
Mining Engineering MI BE, IS, KH, VN
Nuclear Engineering and Technology NE KN
Nanotechnology NT RR
Ocean Engineering OE MD
Ocean Engineering and Naval Architecture OE KH
Physics PH DL, MD , RR
Physics and Meteorology PM KH*
Production Engineering PE JU*, PS*, TR*
Production Technology PT AU
Ranbir and Chitra Gupta School of Infrastructure
ID KH
Design & Management
Reliability Engineering RE BM, KH
Rubber Technology RT KH
School of Information Technology IT KH
Signal Processing SP BG
Systems and Control Engineering SC BM
Systems Science and Automation SA BG
Textile Technology TX DL, PS
Water Resources Development WR RR
Centre for Educational Technology ET KH
* Specializations have to be indicated while opting for the particular department. Code for the specializations are given along
with the details corresponding to the particular institution (Depts. & Field of Specialisation).
6
IV. ELIGIBILITY CRITERIA
1. Only candidates (such as lecturers, readers, assistant professors, associate professors and professors) with a
minimum of two-years teaching experience as full-time regular/permanent teachers of AICTE approved Degree
level Engineering Institutions, National Institutes of Technology (NITs) and National Institutes of Technical
Teachers’ Training and Research (NITTTRs) as on September 30, 2009 (Wednesday) are eligible to apply.
Admissions to Master degree programme under QIP are open only to candidates with a basic Engineering or
Technology or Architecture degree or such other qualifications.
2. The candidate should satisfy the minimum eligibility criteria prescribed by the individual Department (and/or the
Institution) to which admission is sought.
3. Computer Programmers, Systems Programmers, Workshop Staffs, Guest Lecturers, Visiting Lecturers, Teaching
Assistants, Ad-hoc/Contract or Part-time Teachers, Technical Assistants, Research Engineers, Scientific Officers
and other such categories of staff are not eligible.
4. Teachers of the Major QIP centers are not eligible.
5. Teachers of the Minor QIP centres are eligible to apply to Major QIP Centres.
6. Teachers of the minor QIP centres are permitted to apply for a field of specialization available in another minor
QIP centre, which is not available in their parent department on the specific recommendations of the Department
and Institute Heads stating that a faculty in the particular specialization is required for their Institution.
General Instructions
1. The candidate should first register by clicking “New Registration”. An email confirming the registration will be sent
by assigning an Application number and a password. The application number and the password are required for
subsequent operations. Hence the candidate should remember them or keep them in safe place.
2. Candidate can start filling up the on-line application by logging in through “View/Edit Application”.
3. On-line application can be completed in one or more sessions by revisiting the website using the assigned
application number and password.
4. The candidate should enter all required information correctly in all fields of the on-line application.
5. After filling the fields, the candidate can save the information in between by using the SAVE button. The
candidate can edit data in any field till the final submission and printout is taken. The last date for on-line
submission of application is October 16, 2009.
7
Personal Information
6. For the Designation Field, the candidate should choose one of the following designation codes from the combo
box. For designations not covered, the candidate should specify the exact designation under the Other
Designation field, failing which his / her application cannot be considered.
7. After completing the Name, Designation, Department and Address fields (using the pull-down menu) enter Date
of Birth; Gender as ‘Male’ or ‘Female’; the category by ’General’, ‘SC’, ‘ST’, or ‘OBC’; put ‘Yes’ if you belong to
Physically Disabled Category and “No’ if you do not; Married as ‘Yes’ if you are married and ‘No’ if you are single.
8
16. The following Table indicates the number of printouts to be taken and the number of sets of enclosures required
as related to the number of institutions and departments a candidate proposes to apply.
No. of Institutions Total No. of Departments (streams or No. of applications to be printed and
chosen specialisations) chosen No. of sets of enclosures required
1 1 2
1 2 3
2 2 3
2 3 4
2 4 5
3 3 4
3 4 5
3 5 6
3 6 7
17. In each copy, the candidate should affix his/her recent stamp-size photograph in the space provided.
18. The candidate should thoroughly verify the contents of the printed documents and sign at the appropriate places.
19. In the “Forwarding Note” of the Application Form, the space provided for the Name of the Candidate and
Teaching Experience must be filled in and to be duly signed by the Principal / Head of the Institution along
with the Office Seal.
20. Applications submitted without signatures of the candidate and the appropriate authorities with seal, and/or without the
required enclosures will automatically be deemed invalid.
10
XIII. SCHEDULE OF INTERVIEWS FOR ADMISSION TO MASTER DEGREE PROGRAMMES UNDER QIP
The following dates of interview at various QIP Centres, finalized by National QIP Coordination Committee, are
final and cannot be altered under any circumstances.
Interview
S.No Institute Day
Date
1 IIT Delhi 15-01-10 Friday
2 IIT Kanpur 18-01-10 Monday
3 Motilal Nehru National Institute of Technology, Allahabad 19-01-10 Tuesday
4 Institute of Technology, BHU, Varanasi 20-01-10 Wednesday
5 IIT Roorkee 22-01-10 Friday
6 Bengal Engineering and Science University, Howrah 25-01-10 Monday
7 Jadavpur University, Kolkata 27-01-10 Wednesday
8 Indian School of Mines, Dhanbad 28-01-10 Thursday
9 IIT Kharagpur 29-01-10 Friday
10 IIT Guwahati 01-02-10 Monday
11 National Institute of Technology, Rourkela 03-02-10 Wednesday
12 SGS Institute of Technology & Science, Indore 05-02-10 Friday
13 IIT Bombay 08-02-10 Monday
14 National Institute of Industrial Engineering, Mumbai 09-02-10 Tuesday
15 Visvesvaraya National Institute of Technology, Nagpur 10-02-10 Wednesday
16 National Institute of Technology Karnataka, Surathkal 12-02-10 Friday
17 IISc Bangalore 15-02-10 Monday
18 BMS College of Engineering, Bangalore 16-02-10 Tuesday
19 UVCE, Bangaluru 17-02-10 Wednesday
20 SJ College of Engineering, Mysore 19-02-10 Friday
21 National Institute of Technology, Warangal 22-02-10 Monday
22 IIT Madras 24-02-10 Wednesday
23 Anna University, Chennai 26-02-10 Friday
24 Malnad College of Engineering, Hassan 03-03-10 Wednesday
25 PSG College of Technology, Coimbatore 05-03-10 Friday
26 National Institute of Technology, Tiruchirappalli 08-03-10 Monday
27 National Institute of Technology, Calicut 12-03-10 Friday
Specializations mentioned indicate only areas of interest, and are not exhaustive. There may not be admissions open
to all the areas indicated, and candidates, if found suitable, may be admitted to related areas also.
The details given are subject to variation and change from time-to-time and only those operating in the respective
institutions at the time of actual admissions are applicable. Candidates desirous of more information such as for
accommodation, fee structure etc. may write/contact to the QIP Coordinator of the individual institution or visit their
website.
11
1. Indian Institute of Science Bangalore - BG
In all cases, the minimum eligibility is second class or equivalent grade point in the qualifying examination or Bachelor’s degree in Science with
Physics and Mathematics in the curriculum followed by the professional diploma as relevant to individual departments.
12
Code Department Fields of Specialization Minimum Qualification
Microelectronic Semi-custom VLSI Design-FPGA, ASIC, Sub micron BE/B.Tech or equivalent degree in Electrical (EE),
System CMOS Device Technology; Analog and RF circuit Electronics and Communication (EC), Computer
(Jointly design, MEMS. Science (CS), Instrumentation with Electronics (IN)
conducted by, OR
Electrical B.Sc or equivalent degree followed by AMIETE (EC)
BGML01 Communication or AMIE in Electrical (EE) or Electronics and
Engg. & Centre Communication(EC)
for Electronics
design &
Technology)
Signal Medical Signal, Speech, Audio and Image/video BE/B.Tech. or equivalent degree in Electrical,
Processing Processing, Compression, Array Processing, DSP Electronics and Communication OR B.Sc. or
(Jointly Architectures, Pattern Recognition, Biomedical equivalent degree followed by GRAD. IETE or AMIE
conducted by Imaging, Bio-inspired Signal Processsing. in Electrical or Electronics and Communication.
BGSP01 Elect. Engg &
Electrical
Communication
Engg.)
Electronics Communication Networks, Embedded Systems, BE/B.Tech. or equivalent degree in Electronics as
Design and Power Conversion, VLSI Design, Electronic one of the subjects or B.Sc. or equivalent followed by
Technology Packaging, Instrumentation. AMIE a relevant area of specialization OR M.Sc. in
(Centre for Physics with Electronics as the special subject.
BGED01 Electronics (M.Sc. degree or equivalent degree holders should
Design and possess 2 years experience in Electronic Hardware)
Technology)
Analytical Instrumentation, Electronic Instrumentation, M.Sc. or equivalent degree with specialization in
Laser and Optical Instrumentation, Solar Energy and Instrumentation/Electronics/equivalent or
Instrumentation Thermal Instrumentation, Vacuum and Thin Films. B.E./B.Tech. or equivalent degree in Instrumentation/
BGIN01 Instrumentation & Control Engineering or
Electronics & Instrumentation/Electronics.
Multi-disciplinary program addressing, High BE/B.Tech. or equivalent degree in any discipline
BGCP01 Computational Performance Computing, Computational issues in M.Sc. or equivalent degree in any discipline
Science large scale problem solving, Simulation in Science
(Supercomputer and Engg., Numerical Techniques and Algorithms, In all cases strong mathematical and programming
Education & Computational Biology. background is required.
Research Centre)
13
2. Indian Institute of Technology Bombay - BM
The FIRST class (60%) in qualifying degrees (55% for SC / ST) is essential for general eligibility.
BMME02 Mechanical Design Engineering First class degree (with 60% minimum; 55% for SC/ST) in
Engineering Mechanical Engg./Production /Automobile Engg. /M/c
Tool Engg./ Aerospace Engg.
BMME03 Manufacturing Engineering First class degree (with 60% minimum; 55% for SC/ST) in
Mech./Prod./ M/c Tool/Industrial Engg.
14
Code Department Fields of Specialization Minimum Qualification
BMMM01 Materials Science and Engineering Bachelor’s Degree in Metallurgical ceramic, Chemical,
Electrical, Electronics, Electro-chemical, Mechanical,
Metallurgical Engineering Physics or M.Sc. in Chemistry, Physics or
Engineering and Materials Science or M.Sc. Applied Physics.
Materials Science
BMMM02 Process Metallurgy
Bachelor’s Degree in Metallurgical Chemical,
Electrochemical, Mech. Engineering, Materials Science,
Production Engg.
15
Code Department Fields of Specialization Minimum Qualification
Environmental Monitoring, Industrial Air & Water Pollution Bachelor of Engineering degree in
BMEV01 Environmental Science Control, Solid and Hazardous Waste Management, Air & Aeronautical / Aerospace, Agricultural,
and Engineering Water Quality Modeling, Environmental Systems Chemical, Civil, Energy Systems,
Optimization, Environmental Microbiology & Biotechnology, Environmental, Mechanical,
Indoor Air Quality, Aerosol Science and Technology, Metallurgical, Mining, Production,
Environmental Impact Assessment and Global Issues. Petrochemical Engineering, or a Master
of Science degree (with Mathematics at
the class XII level) in Atmospheric
Science, Biochemistry, Biotechnology,
Chemistry, Earth Sciences,
Environmental Toxicology,
Environmental Sciences, Life Sciences,
Meteorology, Microbiology and Physics.
The specific problems of research interests include: production planning, Candidates having
BMIO01 Industrial Engineering scheduling and control systems; management of inventories in production, a first class
and Operations Research distribution and service systems; industrial scheduling, facilities planning, project Bachelor's degree
management, quality management, materials management and productivity in any branch of
management; operations planning and control related to CMS, MRP, ERP, Engineering with
flexible assembly, FMS, JIT; Supply chain analysis, reverse logistics, closed- valid GATE Score
loop supply chains and RFID applications, product variety management in any discipline
are eligible to
Operations Research applications in management of technology and resource apply.
allocation; convex optimization; mixed-integer programming; Markov decision
processes; optimal control in deterministic and stochastic systems; (differential)
game theory; applications of game theory; modeling and simulation of supply
chains, manufacturing and service systems; theory and applications of
distributed and hybrid simulations, discrete event and system dynamics
simulations; applied stochastic models; scheduling and control of railways and
other transport operations; time tabling of services, crew and vehicle scheduling
for transport operations; optimization and design problems arising from e-
commerce, including auctions and mechanism design for electronic exchanges;
risk analysis and contract design; revenue management; quantitative models for
financial engineering. Theory and applications of neural nets and fuzzy systems
in
manufacturing and management; development and applications of modern
information systems for managing manufacturing, supply chain and service
organizations
The IEOR programme is unique in its contemporary flavour, with new courses in
Financial Engineering, Supply Chain Management, Game Theory, Markov
decision process, System Dynamics, Neural Networks and Fuzzy Logic, Services
Management, Manufacturing systems to name a few. The programme is equally
strong in background building, with updated courses in Optimization Techniques,
Stochastic Models, Simulation, and Knowledge-based systems.
Theory: Large Scale Systems, Nonlinear System Dynamics Candidates having a Bachelor’s Degree
BMSC01 Systems & Control and Control, Optimization, Optimal and Robust Control, in Aeronautical / Aerospace / Chemical /
Engineering Reliable Computing with interval methods, Sliding Mode Electrical / Electronics / Instrumentation
Control, System Identification. / Mechanical / Metallurgical Engineering.
16
3. Indian Institute of Technology Delhi -DL
In all cases, the minimum eligibility is a graduate degree in Engineering/Technology in the specified field with a minimum of 60% marks (6.75
CGPA) in aggregate (of all the year / semesters of the qualifying examination) or equivalent grade point average (as determined by IIT Delhi). For
SC/ST/PD category candidates the minimum performance in the qualifying degree is relaxed from 60% to 55% (6.75 to 6.25 CGPA).
17
4. Indian Institute of Technology Guwahati -GW
Relaxation of SC/ST/PD candidates: Eligibility criteria will be relaxed by 5% in percent marks or 0.5 point in CPI in all cases.
18
5. Indian Institute of Technology Kanpur - KN
For eligibility to the M Tech programme, one is required to have passed the qualifying examination, i.e., B. Tech./B. E. or M. Sc. in the appropriate
area .
Geo-Informatics (Code14)
b) For Geoinformatics, B.Tech./B.E. in
KNCE02 Civil/Mining/Electrical/Computer Science/
Civil Engineering Electronics Engg./ Information Technology or
(Code No. of the M.Sc. degree in Earth Science streams/
specialization to Geography/ Physics/ Mathematics/
be indicated in Environmental Sciences. Candidates with
the Data Sheet) M.Sc. must have mathematics as one of the
subjects at B.Sc. level
19
Code Department Fields of specialization Minimum Qualification
Power and Control (including Power Systems, Control
Systems and Power Electronics & Drives), Information
Electrical Degree in Electrical or Electronics Engg. or
KNEE01 Systems (including Communications, Telecom Networking
Engineering equivalent.
and Signal Processing), Microwaves & Photonics,
Microelectronics VLSI and Display Tech., Soft Computing.
Environmental
Water Quality & Pollution, Resources Remediation, Air A Bachelor's Degree in any branch of
Engg. and
KNEM01 Quality. Pollution, Environmental Management. Engg./M.Sc. with Maths at 10 +2 level.
Management
Operations Research, Operations Management, Organization
Industrial and Sciences, E-commerce and E-services, Knowledge
Management Management, Strategic Management and Technology Degree in any branch of Engg.
KNIM01
Engineering Management and Entrepreneurship and any area of
management.
Photonics, Laser Fabrication, Laser Spectroscopy, Optical
Degree in any branch of Engg., preferably in
Laser communication, Non-Linear optics, Laser Plasma &
KNLS01 Electronics & Communications, Electrical Engg,
Technology applications, Optical Tomography, Bio-Medical applications of
or Mechanical Engg. or M.Sc. Physics.
Lasers & Laser Material Processing.
Nuclear
Computerized Tomography, Reactor Dynamics, Transport
KNNE01 Engineering and Degree in any branch of Engg.
Theory, Thermal Fluids Analysis, Instrumentation.
Technology
20
6. Indian Institute of Technology Kharagpur -KH
In all cases the minimum eligibility is degree in engineering with a minimum of 60% marks or equivalent.
KHEE02 Control System Engg. Degree in Electrical (KHEE01-KHEE04), Electronics and Elect.
Electrical
Engineering Communication (KHEE02, KHEE04), Instrumentation (KHEE02,
KHEE03 Power System Engg. KHEE04) Engg.
KHEE04 Instrumentation.
Degree in Aerospace, Agricultural, Chemical, Civil, Computer Science,
Electrical, Electronics & Elect. Communication, Energy, Industrial,
Instrumentation, Marine, Mechanical, Metallurgical, Mining, Naval
Humanities & Human Resources Development
KHHS01 Architecture, Production Engg., or in Engg. Physics, or in Ceramic &
Social Sciences and Management.
Glass, Chemical, Food, Food & Fermentation, Materials, Plastics,
Rubber, Polymer, or Textile Tech or Master Degree in any branches of
Science.
Degree in Aerospace, Agricultural, Chemical, Civil, Computer Science,
Industrial
Industrial Engg. & Management. Electrical, Electronics & Elect. Communication, Energy, Industrial,
KHIM01 Engineering &
Management Information Technology, Instrumentation, Marine, Mechanical,
Manufacturing, Metallurgical, Mining, Navel Architecture, Production Engg.
21
Code Department Fields of specialization Minimum Qualification
Computer Science and Data
KHMA01 Mathematics M.Sc. degree in Mathematics, Physics or Statistics.
Processing.
Manufacturing Science and
KHME01 Engineering
Mechanical Degree in Mechanical (all specializations) Aerospace (KHME02,
KHME02 Thermal Science and Engineering KHME03, Energy (KHME02), Metallurgical (KHME01), Production
Engineering
(KHME01) Engg.
KHME03 Mechanical Systems Design
B.E/B.Tech. Degree in Mining Engg.Petroleum Engineering, Mineral
Processing
KHMN01 Mining Engg. Engineering MSc Tech ( Applied Geology and Geophysics)
MSc All Branches Basic Sciences, Geology and Geo-informatics
Materials Engg.
• B.Tech/B.E Degree in Chemical Engg./Technology, Ceramic and
glass Technology, Materials Technology, Plastic and/or Rubber
Technology, Polymer Science and Technology. With 60% marks
KHMS01 Materials Science Materials Science and Engineering
minimum
• M.Sc. in Physics, Solid State Physics, Chemistry, Material Science,
Polymer Chemistry, Electronic Science. With 60% marks minimum
Metallurgical and
Degree in Metallurgical, Chemical, or Mechanical Engg., or in Glass
KHMT01 Materials Metallurgical and Materials Engg.
and Ceramic or Materials Tech.
Engineering
Ocean Engg. &
Ocean Engineering and Naval Degree in Aerospace, Civil, Marine Engg., Mechanical, Ocean Engg,
KHOE01 Naval
Architecture Naval Architecture, Ship-building technology or equivalent.
Architecture
M.Sc(Physics/Applied Physics/Solid State Physics), Bachelor in
Engineering Physics/Polymer engineering, M Sc, (Polymer
Physics & Physics/Polymer Science), M.Sc.( Electronic Science/Materials
KHPH02 Solid State Technology
Meteorology Science/ Chemistry with Mathematics at the B.Sc. Level), M.Sc,(
Applied Optics), Bachelor in Electronics Engg,/Electronics and
Electrical Communication Engg.
Degree in Chemical, Materials, Plastics and/or Rubber, Polymer or
Rubber
KHRT01 Rubber Technology Textile Tech., Mechanical or Production Engg., or in Physics,
Technology
Chemistry.
Ranbir and Chitra
Gupta School of
Infrastructure Design and B.Tech. in Civil, Electrical, Mechanical, Production & Industrial and
KHID01 Infrastructure
Management Energy Engineering or B.Arch./B.Plan.
Design and
Management
Degree in Electrical Engineering, Electronics & Communication Engg,
Reliability Civil Engineering, Chemical Engineering, Computer Science, Industrial
KHRE01 Engineering Reliability Engineering Management, Mechanical Engineering, Aerospace Engineering,
Centre Production Engineering, Instrumentation Engineering Manufacturing
Engineering, , Information Technology and allied branches.
School of
B.E/B.Tech. in Information Technology or Computer Sc. & Engg. or
KHIT01 Information Information Technology
Electronics & Electrical Communication Engg. or Electrical Engg.
Technology
M.C.P Degree Program
Architecture & Degree in Architecture (B.Arch.) or Civil Engg.(B.Tech./ BE) or
KHAR01 Regional Master of City Planning Bachelor of Planning (B.Planning). Students with MA/M.Sc. degree in
Planning Geography or Economics or Sociology are also eligible for admission.
22
7. Indian Institute of Technology Madras - MD
The minimum eligibility is a graduate degree with first class or minimum of 60% aggregate marks (or equivalent grade point average) in the
corresponding or specified branch.
Power Systems & Power Electronics & Communication Engineering, Electrical & Electronics
MDEE02 Electrical
Electronics Engineering, Instrumentation
Engineering
MDEE03 Micro Electronics & VLSI Design Electronics & Communication Engineering
23
Code Department Fields of specialization Minimum Qualification
Thermal Engg. Stream:
(Combustion & Propulsion, Heat (The candidate should posses the following degree in B.E./B.Tech. or
Transfer & Thermal Power, I.C. equivalent)
24
8. Indian Institute of Technology Roorkee – RR
Minimum qualification for candidates of general category seeking admission to the PG programme must have at least 60% marks or 6.00 CGPA
on a 10 point scale at qualifying degree level. For SC/ST/PD category candidates this percentage is 55% or 5.50 CGPA on a 10 point scale. The
percentage of marks will be considered as aggregate awarded in qualifying degree examination.
25
Code Department Fields of specialization Minimum Qualification
26
9. Anna University, Chennai - AU
BEMI01 Mining Engineering Mining Engineering Degree in the relevant field in Engg. Or equivalent
27
12. Indian School of Mines Dhanbad – IS
The eligibility for M.Tech Programmes is 1st class or equivalent in bachelor degree.
28
15. Malnad College of Engineering, Hassan - ML
The minimum eligibility is a graduate degree with not less than 50% of the marks in the aggregate of all the years of degree
examination (cumulative sum of secured marks of all the sem/years divided by the sum of Max.marks). However in case of
candidates belonging to SC/ST candidate, marks shall not be less than 45%.
29
17. National Institute of Industrial Engineering, Mumbai - NI
(*) For SC/ST Candidates 50% marks or 5.5/10 CGPA will be sufficient for all specialties
30
19. National Institute of Technology Karnataka, Surathkal - SK
Admission is open to candidates who have passed the prescribed qualifying Degree Examination with not less than 50% of marks in the aggregate
(taking into account the marks secured in all the subjects of all the public examinations conducted during the entire degree programme) in the
appropriate branch of engineering. This prescribed minimum shall be 45% in the case of SC/ST candidates.
Electrical & Electronics (i) B.E./ B.Tech. in Electrical Engg. or Electrical &
SKEE01 Power and Energy Systems
Engineering Electronics Engg. (ii) AMIE in Electrical Engg.
VLSI Design (i) B.E./B.Tech./B.Sc. (Eng.) in E&C., Electronics &
Telecommunications/ Instrumentation Technology/
SKEC01 E&E/ Computer Science & Eng. (ii) AMIETE
Electronics & Communication
Engg. (Electronics & Telecommunication).
Communication Engineering (formerly, (i) B.E./ B.Tech./ B.Sc.(Eng.) in E&C, Electronics &
SKEC02 Digital Electronics & Advanced Telecommunications. (ii) AMIETE (Electronics &
Communications) Telecommunication).
Digital Electronics & Advanced (i) B.E./ B.Tech./ B.Sc.(Engg.) in E&C, Electronics &
SKEC03 Communications Telecommunications. (ii) Grade IETE.
31
Code Department Fields of specialization Minimum Qualification
i) Bachelor’s degree in any discipline from a recognized
Master of Business Administration ( 4
SKHU01 Humanities university. ii) Rank obtained in the CAT (Common
Semesters)
Admission Test)
B.E./B.Tech./B.Sc.(Engg.) any branch M.Sc.
Mathematical & Systems Analysis and Computer
SKMC01 (Mathematics/ Statistics/ Physics)/ MCA (Master of
Computational Science Applications
Computer Applications) or equivalent.
i) Any Bachelor degree at least three years duration with
Master of Computer Application (6
SKMC02 Mathematics at 10+2 level. ii) Must have valid score in
Semesters)
NIMCET
i) B.E./B.Tech./B.Sc.(Engg.) Examinations in Mechanical
Engg./Automobile Engg./ Industrial and Production Engg./
SKME01 Thermal Engineering
Manufactur-ing Engg./ Industrial & Manufacturing Engg. ii)
AMIE in Mechanical Engg.
i) B.E/B.Tech./B.Sc(Engg.) in Mechanical Engg./ Industrial
& Production Engg./ Industrial Engg./ and Management/
SKME02 Manufacturing Engineering
Mechanical Engg. Manufacturing Engg./ Production Engg. ii) AMIE in
Mechanical Engg.
i) B.E./B.Tech./ AMIE in Mechanical/Electrical&Electronics/
Industrial Production /Mechatronics/Electronics& Commu-
SKME03 Mechatronics* nication/ Industrial/
Instrumentation/Aeronautical/Production Eng.
32
20. National Institute of Technology Rourkela - RK
Minimum eligibility is B.E./ B. Tech. / M. Sc. or equivalent degree in the discipline as mentioned below with not less than 60% marks or 6.5 CGPA
in the qualifying examination.
33
22. National Institute of Technology Warangal - WR
Minimum Eligibility: First class Bachelor degree in Engineering with a minimum of 60% marks in aggregate. In case of SC/ST
candidates, the minimum aggregate marks is 55%.
BE/B.Tech - Mech/Production/Auto/
PSPE01 Production Engineering
Manufacturing/Metly./Industrial Engg.
BE/B.Tech - Mechanical/Production/Auto/Manufacturing/
PSPE02 Product Design & Commerce
EEE/ECE/Industrial Engg./ Mechatronics/ Instrumentation
Production Engineering
BE/B.Tech - Mech/Auto/Chemical Engg./Petrochemical
Engg.
PSPE03 Energy Engineering (OR)
BE/B.Tech – EEE- With Minimum 2 years of Industrial
Experience
BE/B.Tech – Textile Technology / Textile Technology
PSTX01 Textile Technology Textile Technology
(Textile Chemistry)
34
24. Shri G.S. Institute of Technology and Science, Indore - GS
Minimum eligibility is a Bachelor’s Degree with minimum of 50% marks in aggregate of all the years of the degree examinations
(or equivalent grade point average) in the relevant field.
35
QUALITY IMPROVEMENT PROGRAMME
1. Application Number :
2. Name :
3. Designation :
4. Department :
5. College Address :
6. Contact Address :
16. UG Degree :
Year : University :
36
21. Institutions and Departments to which Admissions are sought
Name of the Institute Choice of Specialisation
First Choice Second Choice
Preference 1
Preference 2
Preference 3
24. Teaching Experience at Degree Level Engineering Institute as on September 30, 2009 (Wednesday)
S.No Name and Address of From To (Date) Years-Months Designation
Employer & Institution (Date)
37
Declaration
a. I declare that all the information given by me in this application form is correct to the best of my knowledge and
belief, and I understand that false or incomplete information would cause invalidation of the application.
b. I shall abide by the decision of the National QIP Coordination Committee in all matters pertaining to admissions.
The decision of the Committee shall be final and binding on me.
c. I shall abide by the rules and regulations of the Institutions to which I will be offered admission, if selected.
d. For all legal actions, suits and proceedings, the jurisdiction of a court of law shall be deemed to lie exclusively at
the place at which the Institution considering me for admission is situated or the place where the office of the
Principal Coordinator QIP is located.
e. I understand the contents of this form and, particularly, this declaration being made here.
Mr/Ms-------------------------------------------------------------------------------------------------------
belongs, is approved by AICTE (Not applicable, if the candidate belongs to a National Institute of
Technology (NITs) and National Institute of Technical Teacher’s Training & Research (NITTTR).
b) The applicant is a full-time regular / permanent faculty member of our Institution and is not on deputation
to any other Institution.
c) The applicant has a total of ___ years and ____ months of teaching experience as on September 30,
2009 at the under-graduate level, as full-time, regular/permanent faculty of AICTE approved Degree level
Engineering Institutions (Certificates enclosed).
d) The applicant will be relieved full-time for the programme on deputation and will be paid full salary and
allowances during the tenure of his/her sponsorship, if selected for admission.
Date:
38