Академический Документы
Профессиональный Документы
Культура Документы
Question 1
Hypothesis:
The T-support has an articulation point at A, and fixed at the point B. at the
point T, is attached a cable exercising a pulling horizontal force F, of magnitude
1000N.
Work required
a) isolate the body indicating the various forces acting on it.
b) Develop a table for bill of forces
c) Apply the FPS to develop the equation of forces
d) Calculate the magnitude of the mechanical forces at A and B
e) solve graphically to prove your answer. Taking scale: 1cm = 250N
Question 2: MASSICOT OR PAPER CUTTER
Presentation
The mechanism shown above is a paper cutter used to cut bundles of paper 7. For
this, a force Q must be applied at A. The spring allows a rapid return of the blade 5
Work required
4) i) Isolate the lever 3, develop the bill of external forces that apply to it.
ii) Use Culman’s method to determine ⃗
H 6/3; ⃗
E 8/3 and ⃗
D 2/3. Take ||⃗
F 5/3|| =
2800N.
5) From the equilibrium od piece2, ⃗
D 2/3 = ⃗
B1/2. Justify this expression.