Академический Документы
Профессиональный Документы
Культура Документы
Model #B552QI-BN
1-877-527-0313
HOMEDEPOT.COM
THANK YOU
Installation ..................................................................... 8
Assembly ........................................................................ 9
Standard Ceiling Mounting .......................................................9
Close-to-Ceiling Mounting ......................................................10
Hanging the Fan .................................................................... 11
Attaching the Fan Blades ....................................................... 14
7. Do not use water or detergents when cleaning the fan or fan CAUTION: To reduce the risk of personal injury, use only
blades. A dry dust cloth or lightly dampened cloth will be the screws provided with the outlet box.
suitable for most cleaning.
3 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Pre-Installation
SPECIFICATIONS
Fan size Speed Volts Amps Watts RPM CFM N.W. G.W. C.F.
Low 0.2 9.3 68 1944 7.42 kg 8.33 kg
52 in. Medium 120 0.37 30 134 3757 1.57 cuft
(16.34 lb) (18.34 lb)
High 0.51 61.1 194 5302
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE: Hardware shown to actual size unless noted
otherwise in the table below.
DD
AA
HH
BB EE
FF
CC
II
GG
5 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
B
C
D
When using the standard downrod installation, the distance from the
ceiling to the bottom of the fan blades will be approximately 12 in. The
"close-to-ceiling" installation reduces the distance from the ceiling to
the bottom of the fan blades to approximately 9 in.
Once you have decided which ceiling installation you will use, refer to
the corresponding sections and procedures during the assembly period.
Where necessary, each section of the instructions will note the different
procedures to follow for the two types of installation.
Standard Ceiling Mounting
Close-to-Ceiling Mounting
7 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
MOUNTING OPTIONS
WARNING: To reduce the risk of fire, electric shock, or NOTE: You may need a longer downrod to maintain proper
personal injury, mount the fan to an outlet box marked blade clearance when installing on a steep, sloped ceiling.
acceptable for fan support using the screws provided with the The maximum angle allowable is 18° away from horizontal. If
outlet box. An outlet box commonly used for the support of the canopy (C) touches the hanger ball/downrod assembly (E),
lighting fixtures may not be acceptable for fan support and then remove the decorative canopy bottom cover (D) and turn
may need to be replaced. If in doubt, consult a qualified the canopy (C) 180° before attaching the canopy (C) to the
electrician. mounting bracket (A).
JJ
JJ
JJ
A
C
A
C
□ Route the wires exiting from the top of the fan motor
assembly (F) through the canopy ring (B). Ensure the B
slot openings are on top.
9 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
C
A
B
10
A
A
E
C
F
F
C
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
MM
OO
NN
LL
knowledge or experience, have your fan installed by a
licensed electrician.
□ Connect the fan motor black wire (NN) and the blue
wire (OO) to the supply black (hot) wire (AAA) using a
plastic wire nut (AA).
12
WARNING: Make sure the tab on the mounting bracket (A) WARNING: The locking slots of the canopy (C) are provided
properly sits in the groove in the hanger ball (E) before only as an aid to mounting. Do not leave the fan assembly
attaching the canopy (C) to the mounting bracket (A) by unattended until all four canopy screws are engaged and
turning the canopy housing until it drops into place. firmly tightened.
□ Once lined up, slide the canopy ring (B) and secure it BB
BB
to the canopy (C) until snug. A
JJ
C
B
BB BB
A
C
B
13 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
PP
NOTE: Your fan blades are reversible. Select the blade side
finish which best accentuates your decor.
□ To remove the blade (H) from the blade arm (I), pull
the rectangle plastic band (RR) up and slide the
screws toward the wide portion of the key hole slot
on the blade support plate (G). This will loosen the
blade (H) and blade arm support plate (G) and will
allow you to remove the blade (H) from the blade arm
(I). QQ
RR
14
SS
GG
I
15 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
HH
NOTE: Wait for the fan to stop before reversing the direction
of the blade rotation.
16
Do Do not
□ Check the support connections, brackets, and blade □ Use water when cleaning. Water could damage the motor,
attachments twice a year. Make sure they are secure. or the wood, or possibly cause an electrical shock.
Because of the fan’s natural movement, some
connections may become loose over time. It is not □ Apply oil to your fan or motor. The motor has
necessary to remove the fan from the ceiling. permanently-lubricated sealed ball bearings.
Troubleshooting
Problem Solution
□ Check the main and branch circuit fuses or breakers.
The fan will not start.
□ Check the line wire connections to the fan and switch wire connections in the switch housing.
□ Make sure the screws that attach the fan blade arm to the motor hub are tight.
□ Make sure wire nut connections are not rattling against each other or the interior wall of the switch
housing.
□ Allow a 24-hour "breaking-in" period. Most noises associated with a new fan disappear during this
The fan sounds noisy. time.
□ If using the ceiling light kit, make sure the screws securing the glassware are tight. Check that the light
bulb is also secure.
□ Make sure there is a short distance from the ceiling to the canopy. It should not touch the ceiling.
□ Make sure your ceiling box is secure and rubber isolator pads are used between the mounting bracket
and outlet box.
17 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Problem Solution
□ Verify that all blades and blade bracket screws are secure (most fan wobble problems are caused by
loose parts). Once the fan is properly installed, run the ceiling fan for 10 minutes to let the fan
self-adjust.
If wobble occurs after running the fan for 10 minutes, verify blade level using the following process:
- Select a point on the ceiling above the tip of one of the blades, then select any fan blade and measure
The fan wobbles. from the center of the selected blade to the point on the ceiling. Rotate the fan until the next blade is
positioned and repeat the measurement using the same point from the ceiling for every blade.
Measurement deviations should be within 1/8 in.
- If all deviations are less than 1/8 in. and the fan continues to wobble, please call Customer Service
(1-877-527-0313) to order a complimentary Blade Balancing Kit.
- If deviation is greater than 1/8 in., please call Customer Service (1-877-527-0313) to order
complimentary replacements of your brackets.
18
A AA FF
BB GG
B
CC HH
C
D
DD
I
II
E
EE
19 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
1-877-527-0313
HOMEDEPOT.COM
Retain this manual for future use.
B552QI00001-A