Вы находитесь на странице: 1из 1

INSTITUTE OF SOUTHERN PUNJAB, MULTAN

TERMINAL EXAMINATION (Fall-20)


Course Title: __Reinforced Concrete Structure (Th) ______

Program: BSc. Civil Engineering Technology_ Semester: __5th__ Section: __A__ Roll No.: ___________

Name Of Instructor: _Engr. Hajrah Nosheen_

Max. Marks: ____65____ Time Allowed: As per examination policy of institute_ Date: ___10-2-2021___

Question
Sr. NOTE:
• All questions are compulsory. Marks CLO
No.
• Assume suitable values and draw neat sketches if required.
• Use N= 870-Last two digits of Registration no.
Q1. An axially loaded column 3.0 m long has to carry a factored load of 2N (kN).
fc’=N/35 MPa, fy=300 MPa and maximum aggregate size of 20 mm. Calculate
suitable dimensions and reinforcement for two options. 13 CLO2
a) Square tied column
b) Circular spirally reinforced column
Also prepare working drawing.

Q2. Design a slab consisting of 8 panels of N/75 m * N/200 m clear dimensions,


continuous along their longitudinal edges, which are supported on 450mm wide 13 CLO2
beams. Building is to be used for office purpose. Use C-20 concrete and grade
300 steel. If edge conditions change what would be the effect on the panel
design?
Q3. Draw working diagram and prepare bar bending schedule for the beam having
two 900 standard reinforcement bars of dia. 20 and one bent up bar of 15 dia. at
bottom while at top two straight bars of 10 dia. Hanger bars of 10 dia. are 13 CLO3
provided at 200mm centre to centre for shear reinforcement. Clear cover = 40
mm. Beam lies on 240 mm thick walls and its span is 6m. Also discuss the cons if
bar bending schedule is not provided during construction.

Q4. For a doubly reinforced beam with b=300 mm, d=21√𝑀𝑢(𝑘𝑁. 𝑚) mm,
d’=60mm, fc’=N/33 MPa, fy=300 MPa, service live load bending moment =190
kN-m and service dead load bending moment =155 kN-m. Calculate the required 13 CLO2
steel area for
a) ρ-ρ’ * fs’/fy = 0.7 times maximum permissible steel ratio for singly
reinforced section.
b) Area of compression steel is to be minimum
Q5. Design the flight of stair consisting of 14 steps with 1.5m landing on both ends,
having a reinforced concrete footing at bottom. The width of stair is 1.4m. Use 13 CLO2
C-20 concrete and grade 420 steel. If you are changing height of riser, then
what would be its effect on steps?

Вам также может понравиться