Академический Документы
Профессиональный Документы
Культура Документы
SECTION TR
CONTENTS
NOTE: SERVICE DATA AND SPECIFICATIONS . . . TR-2
This section contains information and General Specifications . . . . . . . . . . . . . . . . TR-2
specifications for both General Overseas Market Tightening Torque . . . . . . . . . . . . . . . . . . . TR-2
(GOM) and North America. Therefore, ensure the PRECAUTIONS AND PREPARATION . . . . . TR-3
specifications or procedures you are looking at Precautions . . . . . . . . . . . . . . . . . . . . . . . . TR-3
are for the proper area. TROUBLE DIAGNOSES AND
CORRECTIONS . . . . . . . . . . . . . . . . . . . . . . TR-4
TIRE AND ROAD WHEEL . . . . . . . . . . . . . . TR-5
Tire and Road Wheel Assembly . . . . . . . . . TR-5
Replacing Tires . . . . . . . . . . . . . . . . . . . . . TR-6
Inspection . . . . . . . . . . . . . . . . . . . . . . . . . TR-6
SERVICE DATA AND SPECIFICATIONS
General Specifications
Except North America
•···standarad ···option
Model
AS1N1L13Q AS1N1L15Q A1N1L15Q A1N1L18Q AG1N1L16Q AG1N1L18Q AG1N1L20Q
Tire
Tire size 18x7-8 18x7-8 18x7-8 200/50-10
(Pneumatic solid)
Rim size 4.33R-8 4.33R-8 4.33R-8 6.50F-10
(Pneumatic solid)
Singles
Fronts
Clean (White)
Cushion
Tire size
15x4.5-8 140/55-9 15x4.5-8 140/55-9 140/55-9
(Pneumatic solid)
Rim size
3.00D-8 4.00E-9 3.00D-8 4.00E-9 4.00E-9
(Pneumatic solid)
Rears
Pneumatic •
• • • • • •
solid
Types
Clean (White)
Cushion – – –
Cushion • • •
Tire size (Pneumatic solid) 15´4.5-8 140/55-9 140/55-9
Rim size (Pneumatic solid) 3.00D-8 4.00E-9 4.00E-9
Tire size (Cushion) 15x5x11-1/4 15x5x11-1/4
Rear
Cushion • • •
Tightening Torque
Model A1N1 series
Wheel nut Front 167 - 226 (17 - 23, 123 - 166)
Nm (kgf-m, ft-lb) Rear 167 - 226 (17 - 23, 123 - 166)
TR-2
PRECAUTIONS AND PREPARATIONS
Precautions
! CAUTION
• When raising or lowering the vehicle using a jack, refer to GI
section for safe operation and follow all safety precautions.
• Be careful not to drop heavy components or parts. Always
use a lifting device.
TR-3
TROUBLE DIAGNOSES AND CORRECTIONS
! CAUTION
• The following table lists only typical examples. To perform an accurate diagnosis, carefully listen
to the user’s complaints and check the actual vehicle to fully understand under what conditions the
symptoms occur.
TR-4
TIRE AND ROAD WHEEL
TR-5
TIRE AND ROAD WHEEL
Replacing Tires
1. Before removing a tire, loosen wheel nuts slightly. Then raise
vehicle using a jack. For jacking information, refer to GI section.
2. Remove wheel nuts, then remove tire.
3. To install tire, reverse the order of removal. Always observe the
torque specifications and instructions outlined above.
Inspection
Checking Wheel Nuts
Before each day’s operation, check wheel nuts for looseness.
Check wheel nuts for torque specification at specified regular
intervals.
Front and rear wheel nuts:
167 - 226 Nm (17 - 23 kg-m, 123 - 166 ft-lb)
! CAUTION
• Always tighten wheel nuts in a criss-cross fashion.
TR-6