Академический Документы
Профессиональный Документы
Культура Документы
net
Understand Pattern
Feature
Beginner guide to Creo Elements/Pro
Waqas Ahmad
Mechanical Engineering 360
This tutorial is made at Cero Elements/Pro V 5 the graphics layout in older versions may be different
UNDERSTAND PATTERN FEATURE Mechanical Engineering 360
1) Axis
2) Direction
3) Fill option
After making hole in disk select the hole so it become red highlighted.
when you do this pattern tool also become active for this feature just like
this.
now click at pattern tool and set the parameters as shown below.
www.mechanical360.net
UNDERSTAND PATTERN FEATURE Mechanical Engineering 360
Well choose axis option from dashboard as shown above and the select the
axis of your disk. Select 360 rotation option and set total number of holes to
be 10.and press done button……
now your disk will look like this.
now when you active this option you will see black dots that are going
outside from our disk. to make them within disk just put the radial distance
value to ” -12 ” so black dots will become within the disk. Now press done
button and your disk look as this is..
www.mechanical360.net
UNDERSTAND PATTERN FEATURE Mechanical Engineering 360
To try this tutorial , first make a rectangle with dimension 200 length , 100
width. you may choose your own but for this tutorial use above mentioned
dimensions.
after making solid rectangle make a hole using Hole Tool. Make the offset
distance to be at 10 from each wall (upper and right) and set hole dia to 10
as shown below.
Now select the hole so it turn red highlighted and pattern tool become
active.
click at pattern tool and from tool menu select direction method.now
program will ask you direction reference.To make this click at the side as
shown in fig below (red highlighted ) make number of holes 10 and set the
distance between the hole to be 20.you can change the direction of pattern
holes by placing “-ve” sign with the distance between hole.
www.mechanical360.net
UNDERSTAND PATTERN FEATURE Mechanical Engineering 360
now everything has done so press done button and you part will look like as
shown in start of this tutorial.
www.mechanical360.net
UNDERSTAND PATTERN FEATURE Mechanical Engineering 360
there you have to select the option as i have shown in above fig. when you
click at “Define ” button program will let you in sketch mode and it will ask
you to define plan…use “use previous” and program will let you enter in
sketching mode…..
In sketching mode we have to draw the section in which we want to
make pattern.
www.mechanical360.net
UNDERSTAND PATTERN FEATURE Mechanical Engineering 360
www.mechanical360.net