Академический Документы
Профессиональный Документы
Культура Документы
_______________________________________________________________________
_
1 of 6
5, select “Edit Density calculations”
Note: 1, if you are adding a new well, select well setup which is not in use.
2 of 6
6, Select “Lookup table / External PVT Package” and press “O.K”
3 of 6
8, Select correct PVT table from the folder
11, Select “Permittivity and Conductivity” from “Fluid menu –Fluid calibration”
4 of 6
Once the update is finished, follow the steps to designate the PVT selection to a well
number.
13, Go to “File” and open “well test window”
14, Select an available Well number and change the corresponding Parameter set to the
Well selection number + 1 and press O.K
Example: If you have edited well selection 3 in Fluid calibration Menu, then parameter
set number should be 4 in Well test setup
5 of 6
16, Enter User password “alex”
17, Change the file name to a new one (example. “R-06_210306.prm”) and save
6 of 6