Академический Документы
Профессиональный Документы
Культура Документы
1
1
16
16
ID "D" #4 Bars #5 Bars #4 Bars # 5 Bars
d +
d +
Length 25" Length 30" Length 25" Length 30"
8
3 Plain Steel Dowel Bar (Coat And Lubricate In Lubricate In Accordance With
4
Accordance With Section 350 Of The Std. Specs.) Section 350 Of The Std. Specs.) Tie bars are deformed #4 or #5 reinforcing steel bars meeting the
D
D
requirements of Section 931 of the Standard Specifications.
D
Sheet Metal Bottom Strip In Accordance With
2
Support And load transfer tied joint with #4 bars at 24" or #5 bars at 38" spacing.
Section 931 Of The Standard Specifications
Spacer
L
12"
L
BUTT CONSTRUCTION JOINT TO BE USED 2
Note: Expansion joints to be placed on approaches to bridges, at street Approx. 3"
AT DISCONTINUANCES OF WORK
intersections and other locations indicated in detail plans. Top Of Pavement
D
L L
Approved Tie Bar Support
D
2
D
2
L L
2 2
D
D
D
2
D
2
Approx. 3"
Top Of Pavement
1 1
Initial 8
Saw Cut Or 4
Max.
Steel Tie Bar 1 1
TRANSVERSE CONTRACTION JOINT, VIBRO CAST METHOD TRANSVERSE CONTRACTION JOINT, SAWED METHOD Formed Groove (Depth to3 D)
D
4
D
Approved Tie Bar Support Anticipated Break
D
2
2
DOWELS (LENGTH 18")
Note: Slabs poured simultaneously. Tie bars may be inserted in the plastic concrete by means approved by the Engineer.
3
6"-6 1/2 " 4
"
D
2
1
9"-10 1/2 " 14 "
11" 12 "
1 LONGITUDINAL JOINTS
Plain Steel Dowel Bars
Bend Up Against End Of
Sheet Metal Bottom Strip For Expansion Joints Only Pavement After Forms
Are Removed
DOWEL BAR LAYOUT Note: For joint seal dimensions see Sheet 2.
TRANSVERSE JOINTS ARE TO BE SPACED AT A MAXIMUM OF 15’. DOWELS ARE REQUIRED AT ALL TRANSVERSE JOINTS UNLESS OTHERWISE NOTED IN PLANS.
TRANSVERSE JOINTS
Last
2006 FDOT Design Standards Sheet No.
Revision
07/01/05 1 of 4
Index No.
CONCRETE PAVEMENT JOINTS
305
BACKER ROD BOND BREAKER
(CONCRETE-CONCRETE JOINTS)
3 1 1 1 1
8 4 2
14
2
1
Joint Sealant Material To Be
8
14
t
2 4 8 2
Joint Sealant Material To Be
‘
As Specified In The Plans 5 5 3 1 9
9/16 " Preformed Elastomeric As Specified In The Plans 8 16 4
12 16
1
Backer Rod Placement Depth
12
Tape Bond Breaker Compression Seal 3 3 3 5
1 Joint Depth 4 8 1 14 8
(w+ ) Backer Rod Bond Breaker
8
7 7 1 3 11
Existing Joint Or Crack 8 16 18 14 16
Saw Cut Or Parting Strip 1 1 3
Saw Cut Or Parting Strip 1 1 1 14 2 4
2
1 1 4
to D (D=Conc. Pavt. Thick.)
3
to D (D=Conc. Pavt. Thick) 1 1 3
4 3 Not Required For Construction Joints 1 2 14 + 2+ 4
Not Required For Construction Joints.
Or Existing Joints Or Cracks.
Unless otherwise indicated on the plans the joint width
for new construction will be 1 for construction joints,
4
3
8
for all other joints.
Note: Dimension w will be shown in the plans or
established by the Engineer based on field FOR NEW PROJECTS FOR NEW AND REHABILITATION PROJECTS For rehabilitaion projects the joint width will be shown
conditions. Dimension d will be constructed on the plans or established by the Engineer based on
w PREFORMED ELASTOMERIC COMPRESSION SEAL BACKER ROD BOND BREAKER field conditions.
so that the shape factor has
t a maximum
value of 2.0 and a minimum value of 1.0.
CONCRETE-CONCRETE JOINTS
3 3
d = w = Unless
4 Specified Otherwise In The Plans d = w = Unless
4 Specified Otherwise In The Plans
d
Joint Sealant Material To Be
t
t
Joint Sealant Material To Be
As Specified In The Plans As Specified In The Plans
Last
2006 FDOT Design Standards Sheet No.
Revision
JOINT SEAL DIMENSIONS 00 2 of 4
Index No.
CONCRETE PAVEMENT JOINTS
305
Inside Face Of Slip Form
6" 8"
9 7 7 9
Guide Bar Fastened To Form 16
16 8 8
Plastic Insert
9
16
Hook Bolt
5
8
Hex Bolt
12" 12"
A
2"
2"
A
1
Spacer Bars
116
Spacer Bars
12" 12"
Threaded Sleeve
7
Guide Bar Fastened To Form 18
SECTION BB
SECTION BB
Joint
Joint Seal Preformed Joint Filler
Untied Keyed Joint
Tied Longitudinal Joints
Transverse Doweled
R Transverse Doweled
Contraction Joints Tied Longitudinal R
Expansion Joint
D
D
Joints
D D
2 2
Leg
1 SECTION AA Staking Pin Staking Pin
R
Sealer
8 SECTION AA
1"
1
R
1 Transverse Doweled
CONTRACTION ASSEMBLY EXPANSION ASSEMBLY
" D "
8
R
4
Untied Keyed Joint Contraction Joint
.25 D 1:3 Slope
Untied Keyed Joint
0.1 D Tied Longitudinal
.375 D Transverse Doweled
Joints
Contraction Joints
Note:
Proprietary contraction and expansion assemblies may be used.
KEYED JOINT JOINT LAYOUT AT THRU INTERSECTION JOINT LAYOUT AT ’T’ INTERSECTIONS
Products shall be introduced to the State Construction Office in
accordance with section (C) of the Product Evaluation Procedure.
NOTES
1. Longitudinal joints will not be required for single lane pavement 14’ or less in width.
For entrance and exit ramp joint details, see Sheet 4 of 4.
3. All manholes, meter boxes and other projections into the pavement shall be boxed-in with
1/2 " preformed expansion joint material.
JOINT ARRANGEMENT
Last
2006 FDOT Design Standards Sheet No.
Revision
00 3 of 4
Index No.
CONCRETE PAVEMENT JOINTS
305
Longitudinal Joint Contraction Joint (Typ.)
12’
12’
3’ Min.
3’ Min.
3’ Min.
14’
14’
PCC Gore Pavt.
50:1 Taper
Longitudinal Joint
Contraction Joint (Typ.)
3’ Min.
12’
14’
Mainl
ine Pav
t. 2-THRU LANES WITH SINGLE LANE ENTRANCE RAMP
Pavt.
Ramp
14’
Auxiliary Lane
Contraction Joint (Typ.) 25:1 Taper Transition From 12’ to 14’
Wide Over 3 Slabs
12’
12’
ENTRANCE TAPER WITH AUXILIARY LANE
3’ Min.
3’ Min.
12’
14’
Longitudinal Joint
Contraction Joint (Typ.)
14’
3’ Min.
Transition From 14’ to 12’ PCC Gore Pavt.
12’
14’
Wide Over 3 Slabs
14’
Rate Varie Auxiliary Lane
s
Longitudinal Joint
Pavt. Transition From 14’ to 12’ Wide Over 3 Slabs
line
Main
vt.
Ram
p Pa ENTRANCE RAMP WITH ADDED LANE EXIT TAPER WITH AUXILIARY LANE
12’
3’ Min.
3’ Min.
14’
14’
PCC Gore Pavt.
3’ Min.
3’ Min.
Note: On single lane ramps, longitudinal joint to be
12’
12’
12’
3’ Min.
3’ Min.
12’
14’
14’
3’ Min.
Transition From 12’ to 14’
Wide Over 3 Slabs
12’
14’
Mainline Pa
vt. Ramp Pavt.
07/01/05 4 of 4
Index No.
CONCRETE PAVEMENT JOINTS
305