Академический Документы
Профессиональный Документы
Культура Документы
DECLARATION OF CONFORMITY
We, NOKIA CORPORATION declare under our sole responsibility that the product RM-145
is in conformity with the provisions of the following Council Directive: 1999/5/EC.
A copy of the Declaration of Conformity can be found from
http://www.nokia.com/phones/declaration_of_conformity/.
0434
Copyright © 2007 Nokia. All rights reserved.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for
personal and noncommercial use in connection with information which has been
encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a
personal and noncommercial activity and (ii) for use in connection with MPEG-4 video
provided by a licensed video provider. No license is granted or shall be implied for any
other use. Additional information including that relating to promotional, internal and
commercial uses may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>.
Under no circumstances shall Nokia be responsible for any loss of data or income or any
special, incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided "as is". Except as required by applicable law,
no warranties of any kind, either express or implied, including, but not limited to, the
implied warranties of merchantability and fitness for a particular purpose, are made in
relation to the accuracy, reliability or contents of this document. Nokia reserves the
right to revise this document or withdraw it at any time without prior notice.
The availability of particular products may vary by region. Please check with the Nokia
dealer nearest to you.
This device may contain commodities, technology or software subject to export laws
and regulations from the US and other countries. Diversion contrary to law is
prohibited.
Issue 1.1
■ Enhancements
A few practical rules about accessories
and enhancements.
• Keep all accessories and
enhancements out of the reach of
small children.
• When you disconnect the power cord
of any accessory or enhancement,
grasp and pull the plug, not the cord.
• Check regularly that enhancements
installed in a vehicle are mounted
and are operating properly.
• Installation of any complex car
enhancements must be made by
qualified personnel only.
1. Get started
■ Install the SIM card and 2. To remove the battery, lift it as
the battery shown (3).
Always switch the device off and
disconnect the charger before
removing the battery.
Keep all SIM cards out of the reach
of small children.
For availability and information on 3. To release the SIM card holder,
using SIM card services, contact gently pull the locking clip of the
your SIM card vendor. This may be card holder, and open it (4).
the service provider, network Insert the SIM card into the SIM
operator, or other vendor. card holder (5). Make sure that
This device is intended for use with the SIM card is properly inserted
the BP-6M battery. and that the gold-colored
The SIM card and its contacts can contact area on the card is facing
easily be damaged by scratches or downwards.
bending, so be careful when Close the SIM card holder (6), and
handling, inserting, or removing the press it until it snaps into
card. position.
1. With the back of the phone
facing you, slide the back cover
(1) to remove it from the phone
(2).
The charging time depends on the Set the time, time zone, and
charger and the battery used. For date
example, charging a BP-6M Li-Ion
Enter the local time, select the time
battery with the AC-4 charger takes
zone of your location in terms of the
about 1 hour and 55 minutes while
time difference with respect to
the phone is in the standby mode.
Greenwich Mean Time (GMT), and
enter the date. See ”Time and date”
■ Switch the phone on p. 37.
and off
Warning: Do not switch the Plug and play service
phone on when wireless When you switch on your phone for
phone use is prohibited or the first time, and the phone is in the
when it may cause standby mode, you may be asked to
interference or danger. get the configuration settings from
Press and hold the power key as your service provider (network
shown. service). Confirm or decline the
query. See Connect to serv. support in
”Configuration” p. 46 and
”Configuration settings service”
p. xi.
■ Normal operating
position
Use the phone only in its normal
operating position.
If the phone asks for a PIN or UPIN Your device has an internal antenna.
code, enter the code, and select OK. Note: As with any other
You can switch on the phone in radio transmitting device,
demo mode without a SIM card do not touch the antenna
inserted. In this mode, all bearer- unnecessarily when the
independent features are available, device is switched on.
and you can make emergency calls. Contact with the antenna
affects call quality and may
cause the device to operate
2. Your phone
■ Keys and parts
Active standby
• 3G indicator (1)
• Signal strength of the cellular
network (2)
• Battery charge level (3)
• Indicators (4)
• The name of the network or the
operator logo (5)
In the active standby mode, the
• Clock (6) phone can display separate content
• Display (7) item windows, such as shortcuts (1),
• The left selection key (8) is Go to audio functions (2), the calendar (3),
or a shortcut to another function. and a user note (4). To select
See ”Left selection key” p. 38. whether active standby is shown, see
Active standby in ”Standby settings”
• The middle selection key (9) mode
p. 36.
is Menu.
3. Call functions
■ Make a voice call Speed dialing
1. Enter the phone number, Assign a phone number to one of the
including the area code. speed-dialing keys, 3 to 9. See
For international calls, press * ”Speed dials” p. 33. Call the number
twice for the international prefix in either of the following ways:
(the + character replaces the • Press the speed-dialing key, then
international access code), enter the call key.
the country code, the area code • If Speed dialling is set to On,
without the leading 0, if press and hold a speed-dialing
necessary, and the phone key until the call begins. See
number. ”Call” p. 44.
2. To call the number, press the call
key. Enhanced voice dialing
3. To end the call, or to cancel the To make a phone call, select and hold
call attempt, press the end key. the right selection key, and say the
To search for a name or phone name of the contact you wish to call.
number that you have saved in The phone will automatically
Contacts, see ”Search for a contact” associate a virtual voice tag with
p. 31. Press the call key to call the each contact in the phone memory.
number.
Make a voice dialing call
To access the list of phone numbers If an application is sending or
you have most recently called or receiving data using a packet data
attempted to call, in the standby connection, end the application
mode, press the call key once. To call before you use voice dialing in GSM.
the number, scroll to the number or In WCDMA it is possible to send
name you want, and press the call voice and data simultaneously.
key.
Voice commands are language-
dependent. To set the language, see
Voice playback language in ”Phone”
p. 45.
Note: Using voice tags may To mute the ringing tone before you
be difficult in a noisy answer the call, select Silence.
environment or during an To end the call or reject a call, press
emergency, so you should the end key.
not rely solely upon voice
dialing in all circumstances.
Call waiting
1. In the standby mode, press and
During a call, to answer the waiting
hold the right selection key. A
call, press the call key. The first call is
short tone is played, and Speak
put on hold. To end the active call,
now is displayed.
press the end key.
If you are using a compatible
To activate the Call waiting function,
headset with the headset key,
see ”Call” p. 44.
press and hold the headset key to
start the voice dialing.
■ Options during a voice
2. Say the voice command clearly. If
the voice recognition is
call
successful, a list with matches is Many of the options that you use
shown. The phone plays the voice during a call are network services.
command of the match on the For availability, contact your
top of the list. After about network operator or service provider.
1.5 seconds, the phone dials the Call options are Mute or Unmute,
number; or if the result is not the Contacts, Menu, Lock keypad,
correct one, scroll to another Record, Loudspeaker, or Handset.
entry, and select to dial the entry. Network services options are
Using voice commands to carry Answer, Reject, Hold or Unhold, New
out a selected phone function is call, Add to conference, End call, End
similar to voice dialing. See Voice all calls, and the following:
commands in ”My shortcuts” Send DTMF — to send tone strings.
p. 38.
Swap — to switch between the
active call and the call on hold.
■ Answer or reject a voice
Transfer — to connect a call on hold
call
to an active call and disconnect
To answer a call, press the call key. yourself.
4. Write text
To enter text (for example, when ■ Predictive text input
writing messages), use traditional or
Predictive text input allows you to
predictive text input. To use
write text quickly using the phone
traditional text input, press a
keypad and a built-in dictionary.
number key, 1 to 9, repeatedly until
the desired character appears. In 1. To start writing a word, use the 2
predictive text input you can enter a to 9 keys. Press each key only
letter with a single keypress. once for one letter. The phone
displays * or the letter if it
When you write text, or
separately has a meaning as a
appears at the top left of the display,
word. The entered letters are
indicating predictive text input, and
displayed underlined.
appears, indicating traditional
text input. , , or To insert a special character,
appears next to the text input press and hold *, or select
indicator, indicating the character Options > Insert symbol. Scroll to
case. To change the character case, a character, and select Use.
press #. indicates number 2. When you finish writing the word
mode. To change from the letter to and it is correct, to confirm it,
number mode, press and hold #, and press 0 to add space.
select Number mode. If the word is not correct, press *
repeatedly, or select Options >
■ Settings Matches. When the word that
To set the writing language while you want appears, select Use.
writing text, select Options > If the ? character is displayed
Writing language. after the word, the word you
To set predictive text input on or intended to write is not in the
revert to traditional text input, dictionary. To add the word to the
select Prediction on or Prediction off. dictionary, select Spell. Complete
the word (traditional text input is
Tip: To quickly set predictive
used), and select Save.
text input on or off when
writing text, press # twice, or
select and hold Options.
6. Messaging
You can read, write, send, and save At the top of the display, you can see
text, multimedia, e-mail, audio, and the message length indicator
flash messages. All messages are counting backwards from the
organized into folders. maximum number of characters
supported by the phone.
■ Text messages (SMS)
With the short message service Write and send SMS
(SMS) you can send and receive text messages
messages (network service). 1. Select Menu > Messaging >
Before you can send any text or SMS Create message > Text message.
e-mail message, you must save your 2. Enter the recipient’s phone
message center number. See number in the To: field. To
”Message settings” p. 27. retrieve a phone number from
To check SMS e-mail service Contacts, select Add > Contact.
availability and to subscribe to the To send the message to multiple
service, contact your service recipients, add the desired
provider. To save an e-mail address contacts one by one. Scroll right
in Contacts, see ”Save numbers and to add new contacts manually in
text items” p. 31. the To: field. To send the message
to persons in a group, select
Your device supports the sending of
Contact group and the desired
text messages beyond the character
group. To retrieve the contacts to
limit for a single message. Longer
which you recently sent
messages is sent as a series of two or
messages, select Add > Recently
more messages. Your service
used.
provider may charge accordingly.
Characters that use accents or other 3. Scroll down, and write your
marks, and characters from some message in the Message: field.
language options like Chinese, take See ”Write text” p. 15.
up more space limiting the number To insert a template into the
of characters that can be sent in a message, select Options > Use
single message. template.
messages, select Options > Add from the current message, select
folder. To delete or rename a folder, Options > Use detail.
scroll to the desired folder, and
select Options > Delete folder or ■ Audio messages
Rename folder.
With this menu, use the multimedia
Your phone has templates. To create message service to create and send a
a new template, save or copy a voice message in a convenient way.
message as a template. To access the Multimedia messaging service must
template list, select Menu > be activated before you can use
Messaging > Saved items > audio messages.
Templates.
Create an audio message
■ Flash messages 1. Select Menu > Messaging >
Flash messages are text messages Create message > Audio
that are instantly displayed upon message. The recorder opens. To
reception. Flash messages are not use the recorder, see ”Voice
automatically saved. recorder” p. 56.
2. To view the available options,
Write a flash message select Options.
Select Menu > Messaging > Create 3. Enter the recipient’s phone
message > Flash message. Enter the number in the To: field. To
recipient’s phone number in the To: retrieve a phone number from
field. Write your message in the Contacts, select Add > Contact.
Message: field. The maximum length To send the message to multiple
of a flash message is 70 characters. recipients, add the desired
To send the message, select Send. contacts one by one. To send the
message to persons in a group,
Receive a flash message select Contact group and the
A received flash message is indicated desired group. To retrieve the
with Message: and a few words from contacts to which you recently
the beginning of the message. To sent messages, select Add >
read the message, select Read. To Recently used.
extract phone numbers, e-mail 4. To send the message, select Send.
addresses, and Web site addresses
Write and send an e-mail Options > Send now or Send and
You can write your e-mail message check for e-mail.
before connecting to the e-mail
service; or connect to the service Download e-mail
first, then write and send your 1. To download e-mail messages
e-mail. that have been sent to your
1. Select Menu > Messaging > e-mail account, select Menu >
E-mail > Write new e-mail. Messaging > E-mail > Check for
new e-mail.
2. If more than one e-mail account
is defined, select the account If more than one e-mail account
from which you want to send the is defined, select the account
e-mail. from which you want to
download the e-mail.
3. Enter the recipient’s e-mail
address. The e-mail application only
downloads e-mail headers at
4. Write a subject for the e-mail.
first.
5. Write the e-mail message. See
2. Select Back.
”Write text” p. 15.
3. Select Inboxes, the account
To attach a file to the e-mail,
name, and the new message, and
select Options > Attach file and
select Retrieve to download the
a file from Gallery.
complete e-mail message.
6. To send the e-mail message
To download new e-mail messages
immediately, select Send > Send
and to send e-mail that has been
now.
saved in the Outbox folder, select
To save the e-mail in the Outbox Options > Send and check for e-mail.
folder to be sent later, select
Send > Send later.
Read and reply to e-mail
To edit or continue writing your
Important: Exercise caution
e-mail later, select Options >
when opening messages.
Save as draft. The e-mail is saved
E-mail messages may
in Outboxes > Drafts.
contain malicious software
To send the e-mail later, select or otherwise be harmful to
Menu > Messaging > E-mail > your device or PC.
E-mail folders
■ Voice messages
Your phone saves e-mail that you
have downloaded from your e-mail The voice mailbox is a network
account in the Inboxes folder. The service, and you may need to
Inboxes folder contains the subscribe to it. For more information
following folders: “Account name” and for your voice mailbox number,
for incoming e-mail, Archive for contact your service provider.
archiving e-mail, Custom 1—Custom To call your voice mailbox, select
3 for sorting e-mail, Junk where all Menu > Messaging > Voice
spam e-mail is stored. The Outboxes messages > Listen to voice messages.
folder contains the following To enter, find, or edit your voice
folders: Drafts for saving unfinished mailbox number, select Voice
e-mail, Outbox for saving e-mail mailbox number.
that has not been sent, and Sent If supported by the network,
items for saving e-mail that has indicates new voice messages. To
been sent. call your voice mailbox number,
To manage the folders and their select Listen.
e-mail content, select Options to
view the available options of each
folder.
Select Menu > Messaging > Character support > Full — to select
Message settings > Text messages all characters in the messages to be
and from the following options: sent as viewed.
Delivery reports > Yes — to ask the Reply via same centre > Yes — to
network to send delivery reports allow the recipient of your message
about your messages (network to send you a reply using your
service). message center (network service).
Message centres > Add centre — to
set the phone number and name of Multimedia message
the message center that is required The message settings affect the
for sending text messages. You sending, receiving, and viewing of
receive this number from your multimedia messages.
service provider. If you select SIM
You may receive the configuration
message centre, you can view the
settings for multimedia messaging
SIM message center information.
as a configuration message. See
Message centre in use — to select the ”Configuration settings service”
message center in use. p. xi. You can also enter the settings
E-mail message centres > Add centre manually. See ”Configuration” p. 46.
— to set the phone numbers and Select Menu > Messaging >
name of the e-mail center for Message settings > Multimedia
sending SMS e-mail. If you select messages and from the following
SIM e-mail centre, you can view the options:
SIM e-mail center information.
Delivery reports > Yes — to ask the
E-mail centre in use — to select the network to send delivery reports
SMS e-mail message center in use. about your messages (network
Message validity — to select the service).
length of time for which the network Image size (multimedia) — to define
attempts to deliver your message. the default image size used in
Messages sent via — to select the multimedia messages.
format of the messages to be sent: Default slide timing — to define the
Text, Paging, or Fax (network service). default time between slides in
Use packet data > Yes — to set GPRS multimedia messages.
or WCDMA as the preferred SMS
bearer.
7. Contacts
You can save names and phone new contact. Enter the last name,
numbers (contacts) in the phone first name, and the phone number.
memory and in the SIM card
memory. ■ Save numbers and text
The phone memory may save items
contacts with additional details, In the phone memory for contacts
such as various phone numbers and you can save different types of
text items. You can also save an phone numbers and short text items
image or a video clip for a limited per name.
number of contacts. You can also use
the video clip saved with a contact The first number you save is
as a ringing tone for the contact. automatically set as the default
number, and it is indicated with a
The SIM card memory can save frame around the number type
names with one phone number indicator (for example, ). When
attached to them. The contacts you select a name from contacts (for
saved in the SIM card memory are example, to make a call), the default
indicated by . number is used unless you select
another number.
■ Search for a contact 1. Make sure that the memory in
Select Menu > Contacts > Names. use is Phone or Phone and SIM.
Scroll through the list of contacts, or 2. Search for the contact to which
enter the first characters of the you want to add a new number or
name. text item, and select Details >
Options > Add detail.
■ Save names and phone 3. To add a number, select Number
numbers and a number type.
Names and numbers are saved in the To add another detail, select a
used memory. To save a name and text type, an image or a video clip
phone number, select Menu > from Gallery, or a new image.
Contacts > Names > Options > Add
multimedia, Via text message, Via caller groups with different ringing
infrared, or Via Bluetooth. tones and group images.
When you receive a business card,
select Show > Save to save the ■ Speed dials
business card in the phone memory. To assign a number to a speed-
To discard the business card, select dialing key, select Menu > Contacts
Exit > Yes. > Speed dials, and scroll to the
speed-dialing number that you
■ Settings want.
Select Menu > Contacts > Settings Select Assign, or if a number has
and from the following options: already been assigned to the key,
Memory in use — to select the SIM select Options > Change. Select
card or phone memory for your Search and the contact you want to
contacts. Select Phone and SIM to assign. If the Speed dialling function
recall names and numbers from both is off, the phone asks whether you
memories. In that case, when you want to activate it. See also Speed
save names and numbers, they are dialling in ”Call” p. 44.
saved in the phone memory. To make a call using the speed-
Contacts view — to select how the dialing keys, see ”Speed dialing”
names and numbers in Contacts are p. 11.
displayed
Name display — to select whether ■ Service and my
the contact’s first or last name is numbers
displayed first Select Menu > Contacts and from
Font size — to set the font size for the following options:
the list of contacts Service numbers — to call the service
Memory status — to view the free numbers of your service provider if
and used memory capacity the numbers are included on your
SIM card (network service)
■ Groups My numbers — to view the phone
numbers assigned to your SIM card.
Select Menu > Contacts > Groups to
This is only shown if the numbers are
arrange the names and phone
included on your SIM card.
numbers saved in the memory into
8. Log
9. Settings
Use for India (New Delhi) GMT +5.5, Right selection key
for Thailand/Indonesia/Vietnam To select a function from the list for
GMT +7, for Singapore/Malaysia/ the right selection key, select
Philippines GMT +8, for Australia Menu > Settings > My shortcuts >
(Sydney) GMT +10, and for New Right selection key. See also
Zealand GMT +12. ”Standby mode” p. 7.
Welcome note — to write the note Select Menu > Settings >
you would like to be shown briefly Enhancements. Depending on the
when the phone is switched on. enhancement, you can select some
Network mode — to select dual mode of the following options:
(UMTS and GSM), UMTS, or GSM. Default profile — to select the profile
You cannot access this option during that you want to be automatically
an active call. activated when you connect to the
Operator selection > Automatic — to selected enhancement.
set the phone to automatically Automatic answer — to set the
select one of the cellular networks phone to answer an incoming call
available in your area. With Manual automatically after 5 seconds. If
you can select a network that has a Incoming call alert is set to Beep
roaming agreement with your home once or Off, automatic answer is off.
network operator.
Confirm SIM serv. actions — See ”SIM ■ Configuration
services” p. 77. You can configure your phone with
Help text activation — to select settings that are required for certain
whether the phone shows help texts. services to function correctly. The
Start-up tone — to select whether services are multimedia messaging,
the phone plays a tone when the instant messaging, synchronization,
phone is switched on. e-mail application, streaming, push
to talk, IM and Web. Your service
Flight query — to select whether
provider may also send you these
Activate flight profile? appears every
settings. See ”Configuration settings
time the phone is switched on if the
service” p. xi.
flight mode was set before switching
off the device. See ”Flight mode” For information on availability and
p. 35. the appropriate configuration
settings, contact your network
operator or service provider.
■ Enhancements
Select Menu > Settings >
This menu is shown only if the phone
Configuration and from the
is or has been connected to a
following options:
compatible mobile enhancement.
11. Gallery
12. Media
Select Options > Refresh all tracks Memory status — to view the free
or Change track list to refresh the and used memory capacity.
track list (for example, after adding
new tracks to the list) or to change ■ Radio
the track list that is shown when you
The FM radio depends on an antenna
open the Music player menu, if
other than the wireless device’s
several track lists are available in the
antenna. A compatible headset or
phone.
enhancement needs to be attached
Play options > Random > On — to to the device for the FM radio to
play the tracks in the track list in function properly.
random order. Select Repeat >
Warning: Listen to music at
Current track or All tracks to play the
a moderate level. Continuous
current track or the entire track list
exposure to high volume
repeatedly.
may damage your hearing.
Media equaliser — to open the list of Do not hold the device near
media equalizer sets. See ”Equalizer” your ear when the
p. 56. loudspeaker is in use,
Loudspeaker or Headset — to listen because the volume may be
to the music player through the extremely loud.
loudspeaker or a compatible headset Select Menu > Media > Radio.
connected to the phone.
To use the graphical keys , ,
Tip: When using a headset, to , or on the display, scroll left
skip to the next track, press or right to the desired key, and select
the headset key. it.
Send — to send the selected file using
MMS, Bluetooth wireless technology, Save radio channels
or an infrared connection.
1. To start the channel search,
Music downloads — to connect to a select and hold or . To
browser service related to the change the radio frequency in
current track. This function is only 0.05 MHz steps, briefly press
available when the address of the or .
service is included in the track.
Note: This feature may not While you are connected to the PTT
be available in your product service, you can use the other
due to your subscription functions of the phone. The PTT
(network service). service is not connected to
Push to talk (PTT) over cellular is a traditional voice communication;
two-way radio service available over therefore many of the services
a GSM/GPRS cellular network available for traditional voice calls
(network service). PTT provides direct (for example, voice mailbox) are not
voice communication. To connect, available for PTT communication.
press the PTT key.
You can use PTT to have a ■ Connect to the PTT
conversation with one person or with service
a group of people having compatible To connect to the PTT service, select
devices. When your call is connected, Menu > Push to talk > Switch PTT
the people you are calling do not on. indicates the PTT connection.
have to answer the phone. The indicates that the service is
participants should confirm the temporarily unavailable. The phone
reception of any communication automatically tries to reconnect to
where appropriate, as there is no the service until you disconnect from
other confirmation whether the the PTT service. If you have added
recipients have heard the call. channels to the phone, you are
To check availability and costs, and automatically joined to the active
to subscribe to the service, contact channels, and if you have selected a
your network operator or service contact, phonebook group or
provider. Roaming services may be channel as the default action for the
more limited than for normal calls. PTT-key, then the name of the
selected item is displayed in the
Before you can use the PTT service,
standby mode.
you must define the required PTT
service settings. See ”PTT settings” To disconnect from the PTT service,
p. 61. select Switch PTT off.
■ Make and receive a PTT available, not logged into the PTT
call service, or unknown. indicates
that the contact does not want to be
Set the phone to use the loudspeaker
disturbed. You cannot call the
or earpiece for PTT communication.
contact, but you can send a callback
When the earpiece is selected, you
request.
can use the phone normally, by
holding it to your ear. To subscribe a contact, select
Options > Subscribe contact, or if
Warning: Do not hold the
one or more contacts are marked,
device near your ear when
select Subscribe marked.
the loudspeaker is in use,
because the volume may be
extremely loud. Make a channel or a group
call
When connected to the PTT service,
you can make or receive channel To make a call to a channel, select
calls, group calls, or one-to-one Channel list in the PTT menu, scroll
calls. One-to-one calls are calls you to the desired channel, and press the
make to only one person. PTT key.
Press and hold the PTT key the entire To make a group call from Contacts,
time you are talking, and hold the the recipients must be connected to
phone in front of you so that you can the PTT service. Select Menu >
see the display. When you are Contacts > Groups, scroll to the
finished, release the PTT key. Talking desired group, and press the PTT key.
is allowed on a first come, first
served basis. When someone stops Make a one-to-one call
talking, the first person to press the To start a one-to-one call from the
PTT key can talk next. list of contacts to which you added
To check the login status of your the PTT address, select Contacts list.
contacts, select Menu > Push to Scroll to a contact, and press the PTT
talk > Contacts list. This service key.
depends on your network operator or You can also select the contact from
service provider and is only available Contacts.
for subscribed contacts. , , or
indicate that the contact is
To start a one-to-one call from the If you press the PTT key to try to
list of PTT channels, select Channel respond to a call while another
list, and scroll to the desired member is talking, you hear a tone,
channel. Select Members, scroll to and Queuing is displayed as long as
the desired contact, and press the you press the PTT key. Press and hold
PTT key. the PTT key, and wait for the other
To start a one-to-one call from the person to finish; then you can talk.
list of callback requests you have
received, select Callback inbox. ■ Callback requests
Scroll to the desired contact, and If you make a one-to-one call and do
press the PTT key. not get a response, you can send a
request for the person to call you
Make a PTT call to multiple back.
recipients
You can select multiple PTT contacts Send a callback request
from the contact list. The recipients You can send a callback request in
receive an incoming call and must the following ways:
accept the call to participate.
• To send a callback request from
Select Menu > Push to talk > the contacts list in the Push to
Contacts list, and mark the desired talk menu, select Contacts list.
contacts. To make the call, press the Scroll to a contact, and select
PTT key. The contacts who accept the Options > Send callback.
call are shown.
• To send a callback request from
Contacts, search for the desired
Receive a PTT call contact, select Details, scroll to
A short tone notifies you of an the PTT address, and select
incoming PTT call. Information such Options > Send callback.
as the channel name or the • To send a callback request from
nickname (network service) of the the channel list in the Push to
caller is displayed. talk menu, select Channel list,
If you have set the phone to first and scroll to the desired channel.
notify you of one-to-one calls, Select Members, scroll to the
accept or reject the call. desired contact, and select
Options > Send callback.
To edit the PTT settings for use, Send my PTT address > No — to hide
select Menu > Push to talk > Push to your PTT address from calls.
talk settings, and from the following
options:
1 to 1 calls > On — to set the phone
to allow the reception of one-to-one
calls. To make but not receive
one-to-one calls, select Off. The
service provider may offer some
services that override these settings.
To set the phone to first notify you of
incoming one-to-one calls with a
ringing tone, select Notify.
PTT key default function is used to
select the default action of the
PTT-key. It can be set to opening the
Contacts list or Channel list. It can
also be set to directly create a PTT
call from any state (unless any other
contact, group or channel is
highlighted) to a contact, channel or
group.
Show my login status > Yes — to
enable the sending of the login
status.
PTT status in startup > Yes > or Ask
first — to set the phone to
automatically connect to the PTT
service when you switch on the
phone.
Push to talk when abroad — to
switch the PTT service on or off when
the phone is used outside of the
home network.
14. Organizer
15. Applications
2. Launch and configure the PC After you select the slide presentation
component. Make sure that the you browse or skip slides, or jump
selected incoming Bluetooth ahead, by using the 4-way navigation
serial port (COM port) key. To view your speaker notes, select
corresponds to the one defined in Notes. To point things out on the
the Bluetooth software settings slides, select Pointer to activate a
on the Bluetooth device of your small black round marker, that you
PC. For details, refer to the PC control with the 4-way navigation
component documentation and key. Select Options > Slide list to
”Set up a Bluetooth connection” return to the slide list. Select Options
p. 40. > Applications list to return to the list
3. Open the slide presentation, or of applications.
start the application you want to To control the mouse pointer (the
control remotely from your cursor) remotely from the phone,
phone. select the desktop mode. After you
Select Applications > Collection > open the desktop, the phone
Presenter > Connect and the device automatically controls your mouse
you want to connect to. pointer. To return to the list of
applications, select Options >
When the Bluetooth Connection
Applications list.
Successful dialog appears on your PC
screen, you must click on it to To quit the Presenter, select
confirm the Bluetooth connection. Options > Exit application?.
The list of available application types
is displayed. Select Open to access
the desired application. Select
Options > Settings to set the Font
size for the speaker notes, and Timer
(in minutes) to optimize the slide
presentation time available. To save
the settings, select Options > Back.
16. Web
2. Select Configuration. Only the Follow the text guides on the phone
configurations that support display. For more information,
browsing service are shown. contact your service provider.
Select a service provider, Default, If packet data is selected as the data
or Personal configuration for bearer, is shown on the top left of
browsing. See ”Set up browsing” the display during browsing. If you
p. 70. receive a call or a text message, or
3. Select Account and a browsing make a call during a packet data
service account contained in the connection, is shown on the top
active configuration settings. right of the display to indicate that
4. Select Display terminal window > the packet data connection is
Yes to perform manual user suspended (on hold). After a call the
authentication for intranet phone tries to reconnect the packet
connections. data connection.
Secondly, make a connection to the
service in one of the following ways: Browse with phone keys
• Select Menu > Web > Home; or To browse through the page, scroll in
in the standby mode, press and any direction.
hold 0. To select a highlighted item, press
• To select a bookmark of the the call key, or select Select.
service, select Menu > Web > To enter letters and numbers, press
Bookmarks. the 0 to 9 keys. To enter special
• To select the last URL, select characters, press *.
Menu > Web > Last web address.
• To enter the address of the
Options while browsing
service, select Menu > Web > Go Select from the following options:
to address. Enter the address of Home — to return to your start page.
the service, and select OK. Shortcuts — to open a new list of
options that are specific to the page.
■ Browse pages This option is only available if the
After you make a connection to the page contains shortcuts.
service, you can start browsing its Add bookmark — to save the page as
pages. The function of the phone a bookmark.
keys may vary in different services.
18. PC connectivity
You can send and receive e-mail, and For availability and subscription to
access the Internet when your phone data services, contact your network
is connected to a compatible PC operator or service provider.
through an IR, Bluetooth wireless The use of HSCSD services consumes
technology, or USB data cable the phone battery faster than
connection. You can use your phone normal voice or data calls. You may
with a variety of PC connectivity and need to connect the phone to a
data communications applications. charger for the duration of data
transfer.
■ Nokia PC Suite See ”Packet data settings” p. 42.
With Nokia PC Suite you can
synchronize contacts, calendar, ■ Data communication
notes, and to-do notes between your applications
phone and the compatible PC or a
remote Internet server (network For information on using a data
service). You may find more communication application, refer to
information and PC Suite on the the documentation provided with it.
Nokia Web site at Making or answering phone calls
www.nokia-asia.com/6233/support. during a computer connection is not
recommended, as it might disrupt
■ EGPRS, HSCSD, CSD, the operation.
and WCDMA For better performance during data
calls, place the phone on a
With your phone you can use the
stationary surface with the keypad
enhanced GPRS (EGPRS), general
facing downward. Do not move the
packet radio service (GPRS), circuit
phone by holding it in your hand
switched data (GSM data) services,
during a data call.
high speed circuit switched data
(HSCSD), and WCDMA packet and
circuit switched data services.
■ Nokia battery
authentication
guidelines
Always use original Nokia batteries
for your safety. To check that you are
getting an original Nokia battery,
purchase it from an authorized 2. When you angle the hologram
Nokia dealer, and inspect the left, right, down, and up, you
hologram label using the following should see 1, 2, 3, and 4 dots on
steps: each side respectively.
Successful completion of the steps is
not a total assurance of the
authenticity of the battery. If you
have any reason to believe that your
battery is not an authentic original
Nokia battery, you should refrain
from using it. If authenticity cannot
be verified, return the battery to the
place of purchase.
■ Nokia Connectivity
Cable CA-53
• Hold the device to the ear opposite wireless equipment in the area over the
the pacemaker to minimize the air bag or in the air bag deployment area.
potential for interference. If in-vehicle wireless equipment is
If you suspect interference, switch off improperly installed and the air bag
your device, and move the device away. inflates, serious injury could result.
Using your device while flying in aircraft
Hearing aids is prohibited. Switch off your device
Some digital wireless devices may before boarding an aircraft. The use of
interfere with some hearing aids. If wireless teledevices in an aircraft may be
interference occurs, consult your service dangerous to the operation of the
provider. aircraft, disrupt the wireless telephone
network, and may be illegal.
■ Vehicles
RF signals may affect improperly ■ Potentially explosive
installed or inadequately shielded environments
electronic systems in motor vehicles such Switch off your device when in any area
as electronic fuel injection systems, with a potentially explosive atmosphere
electronic antiskid (antilock) braking and obey all signs and instructions.
systems, electronic speed control Potentially explosive atmospheres
systems, and air bag systems. For more include areas where you would normally
information, check with the be advised to turn off your vehicle
manufacturer or its representative of engine. Sparks in such areas could cause
your vehicle or any equipment that has an explosion or fire resulting in bodily
been added. injury or even death. Switch off the
Only qualified personnel should service device at refueling points such as near
the device, or install the device in a gas pumps at service stations. Observe
vehicle. Faulty installation or service may restrictions on the use of radio
be dangerous and may invalidate any equipment in fuel depots, storage, and
warranty that may apply to the device. distribution areas; chemical plants; or
Check regularly that all wireless device where blasting operations are in
equipment in your vehicle is mounted progress. Areas with a potentially
and operating properly. Do not store or explosive atmosphere are often but not
carry flammable liquids, gases, or always clearly marked. They include
explosive materials in the same below deck on boats, chemical transfer or
compartment as the device, its parts, or storage facilities, vehicles using liquefied
enhancements. For vehicles equipped petroleum gas (such as propane or
with an air bag, remember that air bags butane), and areas where the air contains
inflate with great force. Do not place chemicals or particles such as grain, dust,
objects, including installed or portable or metal powders.
■ Emergency calls
Important: Wireless phones,
including this device, operate
using radio signals, wireless
networks, landline networks,
and user-programmed
functions. Because of this,
connections in all conditions
cannot be guaranteed. You
should never rely solely on any
wireless device for essential
communications like medical
emergencies.