Академический Документы
Профессиональный Документы
Культура Документы
No Feature
1 Handover criterias supported
13 Paging/Extended paging
14 Increased paging capacity
15 MS access control
16 BSC load control
17 BSC supervision
18 Test management
19 BTS synchronization
20 BTS synchronization reference process
23 TC unit alarm
Remarks Supported by Moto(Y/N)
Power budget,Quality.Level,Distance,traffic load.N-P algorithm used Y
When user locks a particular channel from OMC then the existing calls will not be
dropped but will be allowed to continue till normal release,however,no new calls
will be allowed on that channel. N
Allowed N
Radio link timeout Y
Generates SDCCH/TCH congestion,availability,drop rate on an hourly basis N
Dynamic power control is an optional feature Y
Separate lists exists for idle mode cell reselection and handover Y
Channel precedence can be prearranged according to :-SDDCH only,SDCCH
first,TCH only and TCH first.If SDCCH is chosen first system will assign TCH
directly in case of overloaded SDCCH and vice versa N
SDCCH can be configured on any TRX Y
Reconfiguration of SDCCH to TCH and Vice versa Y
Supported.Queue length depends on no.of TRX Y
Call setup on TCH directly in case no free SDCCH resources are available Y
The 32 latest received paging messages are queued till they are
handled.IMSI/TMSI paging supported Y
Reduces the blocking of paging messages on Abis due to congestion in Abis N
Allows blocking of MS according to MS class Y
Ensures system stability in conditions of heavy load Y
Generates alarm when cells with no traffic or OOS cells are detected N
BER of A -interface and Gb interface can be tested at the BSC itself Check
Supported. Y
BTS can use its internal clock for sync or from an external reference Y
BSC TCU(XCDR) resource can be shared and occupied dynamically by different
codec type N
Real time Handover and assignment failure reports can be generated N
When alarm function of TC locates a faulty board it blocks the board automatically
and OMCR is notified Check
Comments