Академический Документы
Профессиональный Документы
Культура Документы
6 CORPORATE PARKWAY
GOOSE CREEK , SC . 29445 STYLE NUMBER: VR1404ES
www . quoizel . com
PREPARATION
● Before beginning installation of product, make sure all parts are present. Compare parts with package contents
list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement part.
● Estimated Assembly Time: 20 - 30 minutes
● Tool Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape,
Wire cutter, Safety glasses and (4) 50W G9 bulbs .
● Helpful Tools (not included): Wire strippers.
1 OF 3
INSTALLATION INSTRUCTIONS STYLE NUMBER: VR1404ES
STEP 1:
a. Install the G9 Bulb into the Socket, referring to fixture
markings and/or labels for maximum wattage. Please
make sure the G9 Bulb is properly seated it the
Socket.
b. Thread the Bulb Shield onto the Socket and hand-
tighten until snug gently.
Socket
G9 Bulb
Bulb Shield
STEP 2:
a. Place the Mounting Screws on the Diffuser through the
holes on Glass Shade and Shade Holder. Secure by
threading Mounting Balls onto Mounting Screws. Hand-
tighten until snug.
Mounting Ball
Shade Holder
Glass
Shade
Diffuser with
Mounting Screws
Outlet Box
Outlet Box Screw
2 OF 3
INSTALLATION INSTRUCTIONS STYLE NUMBER: VR1404ES
STEP 4:
Use Wire Connectors (not supplied) to connect the
WHITE OR RIBBED WHITE OR RIBBED
wires.
a. Connect the House Ground Wire to the Fixture Ground FROM HOUSE FROM FIXTURE
Wire.
b. Connect the House White (or Ribbed) Wire to the
Fixture Supply Wire (Black or Smooth Side). BLACK (OR RED) WIRE BLACK OR SMOOTH
c. Connect the House Black (or Red) Wire to the Fixture FROM FIXTURE
FROM HOUSE
Supply Wire (Black or Smooth Side).
d. Wrap each connection with approved electrical tape
and carefully stuff all of the connected wires into the GROUND WIRE GROUND WIRE
Outlet Box.
FROM HOUSE FROM FIXTURE
STEP 5:
a. Place the Ceiling Canopy over the Mounting Screws Outlet Box
and secure with the Mounting Balls. Hand-tighten until Mounting
snug. Screw Ceiling
Canopy
Mounting Ball
Side View
Shade
Your installation is completed now. Restore electricity. Retain this sheet for future reference.
3 OF 3