Академический Документы
Профессиональный Документы
Культура Документы
6 CORPORATE PARKWAY
GOOSE CREEK , SC . 29445 STYLE NUMBER: LR2828RZ
www . quoizel . com
H Fixture Chain 1 pc G
I Ceiling Canopy 1 pc H
N Fixture Loop 1 pc K
O Center Column 1 pc
4 pcs L
P Side Arm
Q Socket Assembly 1 pc R
R Shade 1 pc M
S Stem with Hex Nut 1 pc S
T Cap 1 pc T
1 OF 5
PREPARATION STYLE NUMBER: LR2828RZ
● Before beginning installation of product, make sure all parts are present. Compare parts with package contents
list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement part.
● Estimated Assembly Time: 30 - 45 minutes
● Tool Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape,
Wire cutter, Safety glasses and (4) 100W A19 medium base bulbs .
● Helpful Tools (not included): Wire strippers.
INSTALLATION INSTRUCTIONS
STEP 1:
a. Thread the end of the Center Column onto the nipple on
the top center of the Socket Assembly. Please line up
Bolt
Blots on the side of the Center Column and the Bolts on
the side of the Decorative Ring before tightening until
snug.
Center Column
Decorative Ring
Bolt
Socket
Assembly
STEP 2:
a. Thread the Fixture Loop onto the nipple on the top end
of the Center Column. Hand-tighten until snug. Fixture Loop
Center Column
2 OF 5
INSTALLATION INSTRUCTIONS STYLE NUMBER: LR2828RZ
STEP 3:
a. Place the holes on the Side Arm over the Bolts on the
side of the Center Column and Decorative Ring. Secure
by threading Lock Balls onto the Bolts. Hand-tighten
until snug.
Lock Ball
Bolt
Side Arm
Center Column
Decorative Ring
Lock Ball
Socket Bolt
Assembly
STEP 4:
a. Secure the Crossbar onto the Outlet Box with Outlet
Box Screws. Tighten until snug. Outlet Box
Crossbar
Outlet Box
Screw
STEP 5:
Pliers is required on this step.
a. Thread one Hex Nut onto top end of the Nipple.
b. Place one Lock Washer over the top end of the Nipple
and then thread the Nipple into the center lock hole of Lock Washer
the Crossbar. Crossbar
c. Using pliers, thread the Hex Nut against the Crossbar Hex Nut
and hand-tighten until snug.
d. Thread another Hex Nut onto the bottom end of the
Nipple.
Nipple
Hex Nut
3 OF 5
INSTALLATION INSTRUCTIONS STYLE NUMBER: LR2828RZ
STEP 6:
a. Adjust the Fixture Chain to your desired length by
removing the links if needed.
Please note that depends on chain material
thickness, you might be required to use chain pliers to Nipple
spread links open. Hex Nut
b. Pull the supply wires through the Fixture Chain
alternating links. And then pull the wires through the Lock Washer
following components in turn:
Canopy Lock Ring, Ceiling Canopy, Canopy Chain
Canopy Chain Loop
Loop, Lock Washer, and Nipple.
c. Place Lock Washer over the end of the Nipple and
thread the Canopy Chain Loop onto the end of the
Nipple.
Ceiling
d. Using pliers, thread the Hex Nut against the Canopy Canopy
Chain Loop and tighten until snug.
e. Attach one end of the Fixture Chain onto the Fixture
Loop and attach the another end of the chain onto the
Canopy Chain Loop. Fixture Chain
f. Refer to STEP 7 - Wire Connections to connect wires.
g. Push the Ceiling Canopy upward over the Outlet Box.
h. Thread the Canopy Lock Ring onto the Canopy Chain
Loop and tighten until snug to secure the Ceiling Canopy Lock Ring
Canopy.
Fixture Loop
STEP 7:
Use Wire Connectors (not supplied) to connect the
WHITE OR RIBBED WHITE OR RIBBED
wires.
a. Connect the House Ground Wire to the Fixture Ground FROM HOUSE FROM FIXTURE
Wire.
b. Connect the House White (or Ribbed) Wire to the
Fixture Supply Wire (Black or Smooth Side). BLACK (OR RED) WIRE BLACK OR SMOOTH
c. Connect the House Black (or Red) Wire to the Fixture FROM FIXTURE
FROM HOUSE
Supply Wire (Black or Smooth Side).
d. Wrap each connection with approved electrical tape
and carefully stuff all of the connected wires into the GROUND WIRE GROUND WIRE
Outlet Box.
FROM HOUSE FROM FIXTURE
4 OF 5
INSTALLATION INSTRUCTIONS STYLE NUMBER: LR2828RZ
STEP 8:
a. Screw the Hex Nut end of the Stem with Hex Nut into
the Coupling underside of the Socket Assembly. Using
pliers, thread the Hex Nut against the Coupling and
hand-tighten until snug.
Socket
Assembly
Coupling
STEP 9:
a. Install correct bulbs referring to fixture markings and/or labels for maximum wattage.
STEP 10:
a. Place the Shade over the end of the Stem with Hex Nut,
attach onto the bottom edge of the Decorative Ring.
Proceed to place the Rubber Washer and the Flat
Washer over the end of the Stem. Secure with the Hex
nut and tighten until snug.
Decorative Ring
Shade
Rubber Washer
Flat Washer
Hex Nut
STEP 11:
a. Place the Cap over the end of the Stem and secure with
the Finial. Hand-tighten until snug. Shade
Stem
Cap
Finial
Your installation is completed now. Restore electricity. Retain this sheet for future reference.
5 OF 5