Академический Документы
Профессиональный Документы
Культура Документы
02. The bevel angle of single 'V' butt joint for manual metal arc welding is ...
A. 20° , .
B. 30°
C. 40°
D. 50o
A B C D
Key:
03. The root face and root gap of single 'V' butt joint on 10 mm plate for manual metal
arc welding is ...
A. 1 to 2 mm
B. 2 to 3 mm
C. 2.5 to 3 mm
D. 3 to 4 mm
A B C D
Key:
05. As per Indian Standard (BIS) classification of MMAW electrode - ER4211, the third
digit indicates ...
A. tensile strength of the weld
B. welding position
C. current condition
D. elongation and impact property of weld
A B C D
Key:
06. How will you ensure that proper alignment is maintained between the plates being
welded during welding?
A. keep 2 plates on a flat surface
B. prepare the edges properly
C. maintain uniform root gap
D. use proper tack welding
A B C D
Key:
08. The diameter of the key hole during welding butt joint should be ...
A. slightly (ie 1 mm) more than root gap
B. 2 mm more than root gap
C. 3 mm more than root gap
D. 4 mm more than root gap
A B C D
Key:
09. As per the AWS codification of carbon steel coated electrode, in the code
E6013,the fourth digit indicate ...
A. type of flux covering (titanium,
potassium)
B. welding position
C. current condition
D. tensile strength of weld
A B C D
Key:
13. To avoid electric shock to the arc welder the first precaution is to ...
A. use proper earthing/ground connection
B. use good welding machine
C. use safety accessories
D. avoid loose contact
A B C D
Key:
14. The shade number of filter glass used for manual metal arc welding from 100 to 300
A is ...
A. No.8
B. No.10 - 11
C. No.12
D. No.13
A B C D
Key: