Академический Документы
Профессиональный Документы
Культура Документы
com
Revision 1/21/2011
Lateral Brace
Dimensions • Weights
Max. Design Max. Design
Approx.
A B H* Load Lbs. Load Lbs.**
Wt./100
(cULus) (FM)
51⁄4 17⁄8 17/32 2765 2800 132
* Available with hole sizes to accommodate up to 3/4" fastener. Consult factory.
** The loads listed are axial loads on the brace. The horizontal load capacity, H, of the
brace is: H = F x sin θ, where θ is the installation angle measured from the vertical.
TOLCO® brand bracing components are desgined to be compatible ONLY with other TOLCO® brand bracing components, resulting in a Listed
seismic bracing assembly. DISCLAIMER — NIBCO does NOT warrant against the failure of TOLCO® brand bracing components, in the instance
that such TOLCO® brand bracing components are used in combination with products, parts or systems which are not manufactured or sold under
the TOLCO® brand. NIBCO shall NOT be liable under any circumstance for any direct or indirect, incidental or consequential damages of any
kind, including but not limited to loss of business or profit, where non-TOLCO brand bracing components have been, or are used.
OFFICE/MANUFACTURING FACILITY • 1375 SAMPSON AVE. • CORONA, CA 92879 • PH: 951.737.5599 • FAX: 951.737.0330
CUSTOMER SERVICE • 800.786.5266 150
www.tolco.com