Академический Документы
Профессиональный Документы
Культура Документы
Introduction
Gypsum Boards are considered among the most economic
and ideal way for wall partitioning.
Easy to install, saves time and money, gypsum boards can also be used as a
backing for wall treatments such as wall paper, fabric, tile and wood paneling
or it can simply be painted.
SFSP provides a complete product range for drywall and ceiling constructions.
Uni Metal Studs, Runners, Furring Channels, Ceiling Channels, and Wall
Angles are among the range of products produced according to relevant
standards to service the dry wall installers.
1
SFSP
SFSP
Gypsum
Gypsum
Profiles
Profiles
Specifications:
Uni Metal profiles for drywall are manufactured in accordance with
ASTM-C645 requirements.
2
SFSP
Gypsum
Profiles
Forms head
RNR Runner 48 to 150 mm 66 LM & base perimeter
frame of partition
Forms vertical
STD Stud 48 to 150 mm 200 LM component
of partition
Installation
Dry Wall Partition System Additional stud support
above doors and windows
Door
frame
from
runner
section
Wall board
Knockouts
for cables
3
SFSP
SFSP
Gypsum
Gypsum
Profiles
Profiles
Length Pcs./Palleted
Code Dimensions(mm)
(cm) bundle
Main Ceiling MCC 038-GS 11 x 38 x 11 300 500
Channel
Ceiling
Furring
Perimeter Angle
4
SFSP
Gypsum
Profiles
Approx.
Code Description Dimensions requirement Application
per 100m2
A
Main Ceiling Main Ceiling Main support for
MCC 11 x 38 x 11mm 110 LM
Channel B Channel furring channels
C
Support section
Furring 12 x 22 x 35
Furring FCL x 22 x 12mm
200 LM where plaster
A A
Channel
Channel board is fixed
C C
B Fixed round the
perimeter to
Perimeter receive ends of
Perimeter PAN 25 x 25 mm 40 LM
Angle A Angle furring channels
B (Wall Angle) and outer edges
of plaster board
Installation Adjustable
Suspension Hanger
Suspended Ceiling
- Main ceiling channels to be set at 1200 mm
Hanger to any required
centers with hangers at 1200 mm center to length
Plaster
25mm x 25mm
Galvanized wall angle
Drywall screws
at specified centers
5
SFSP SFSP
Gypsum Gypsum
Profiles Profiles
Accessories
Adjustable
Suspension Hanger
Adjustment
spring
UNITECH
Tinsnips
Wallboard hand saw Measuring tape
6
SFSP
Gypsum
Profiles
Plasterboard range
Description
Boards are composed of a gypsum core encased in paper on the face side and a paperliner on the back
side. The face paper is folded around long edges to reinforce and protect the core. The ends are square
cut and finished smooth. The long edges are tapered on the face side to form a shallow channel for the
joint reinforcement.
Advantages Applications
* Eliminate excessive moisture in construction. For internal use only:
* Exceptionally resistant to cracks caused by minor * Ceiling
frame movements, vibrations or settlements. * Under roofing
* Quick and easily applied, low cost installation. * Wall lining
* Suitable for all decorations: Paint, textile, wallpaper, tiling. * Partitioning
Regular boards
Thickness Width Approx. Length
mm mm weight mm
( 0.4 mm ) (+0 mm -5 mm) kg/m2 (+ 0.5 mm)
Technical characteristics
Thermal resistance
2
9.5 mm 0.03 m.2 K/W 18 mm 0.05 m. K/W
12.5 & 15 mm 0.04 m.2 K/W
Water Resistant
Boards are covered with a multi sheet cellulose, impregnated with silicone.
The core of the boards is also treated with silicone oil.
This treatment provides a high protection against water and moisture.
Properties
The main technical properties of water resistant gypsum boards are:
- Moisture absorption according to ASTM C 473/84 tests.
- Surface absorption less than 160 gm. after 2 hours.
- Immersion absorption less than 5% of the weight after two hours of
immersion.
Applications
The main application is for walls and partitions where there is a risk of
flooding, such as: Bathrooms, kitchens, gymnasiums, technical rooms,
basements, etc.
7
SFSP
Gypsum
Profiles
Fire Resistant
Those are the gypsum boards which have fibre glass incorporated in
their plaster cores thus achieving a greater fire resistance.
Properties & Applications
The longer fire resistance of those boards makes them specially adequate
for buildings where a special fire protection is required.
Thermal conductivity (W/m2 OC): 0.18.
Classified M-1, non flammable according to UNE 23.727 standard.
Thickness 12.5 15
Boards Working
Storage
Stacks of boards should be stored on a level surface in a dry place, preferably inside a building and
protected from damp and rainy weather.
It is possible to stack 4 pallets one on each other.
Handling
Boards should be carried on edge.
Cutting
With a knife or cutter Make a cut into the Break it by snapping.
facing liner, guided by a
Cutting of Stud & Runner straight edge.
Metal studs and runners are cut with tinsnips
from one flange to the other. With a hand saw
8
YA-1010 2150 - ED 03