Академический Документы
Профессиональный Документы
Культура Документы
COMPANY
TM
Formwork
CATALOGUE
PRODUCT
Features and benefits
■ Reidbar™ is ductile and can accept both tensile
and shear loads.
■ Makes an ideal anchor for jump forms without the
risk of unexpected shear failure.
■ Robust thread is resistant to damage.
Can be cut and spliced at any point along its
ANCHORS &
FASTENERS
■
length.
■ Reliable mechanical properties and fully weldable.
■ Offcuts can be used for formwork and starter bars.
Waste is eliminated.
■ Simple to install, reusable and recoverable.
■ A complete range of fittings available for all
applications.
REIDBAR &
FITTINGS
■ Simple splicing and installation of anchorage
components.
■ May be tensioned, released and
re-tensioned with ease.
■ Standard stock lengths may be stored and cut to
suit the application.
CONCRETE
SYSTEMS
LIFTING
Specifications and Working loads
Table 15.
Working loads for grade 500 Reidbar™ Formwork
Systems.
NIRVANA
Characteristic Characteristic Working Load Working Load
Product
Grade Minimum Yield Minimum Ult Tension Shear Min Ult
Code
Strength (kN) Strength (kN) Min Ult x 0.6 (kN) 0.62 x 0.6 (kN)
89
© Copyright Reid™ Construction Systems 2007. All rights reserved. Moral rights asserted.
BACKGROUND
COMPANY
TM
Formwork
CATALOGUE
PRODUCT
Typical Formwork Construction Details
Detail 19.
ANCHORS &
FASTENERS
Timber Reidbar™ Formwork Cone
Reidbar™
REIDBAR &
FITTINGS
R plate
Rigid PVC tube
Watertight coupler
These systems are used for basement walls or tanks where a watertight structure is required. After the concrete
has cured the bars are unscrewed from the watertight coupling, formwork cones removed and the holes are then
grouted with mortar or injected with Reid™ Chemset polyester resin.
The coupler is a formwork accessory and is only designed to develop the bar yield strength.
CONCRETE
SYSTEMS
LIFTING
Detail 20.
Timber Reidbar™ Formwork Cone Reidbar™ Watertight Coupler
Reidbar™
NIRVANA
Reidbar™
CHANNELS
CAST-IN
Plastic plug
R plate
91
© Copyright Reid™ Construction Systems 2007. All rights reserved. Moral rights asserted.
TM
Formwork
Reidbar™
Steel
Reidbar™ Footplate
formwork
Rigid PVC tube
Reidbar™
Anchoring slip forms and jump forms for high shear loads
Reidbar™
Plastic plug
Steel formwork
92 © Copyright Reid™ Construction Systems 2007. All rights reserved. Moral rights asserted.
BACKGROUND
COMPANY
TM
Formwork
CATALOGUE
PRODUCT
Design Example
ANCHORS &
FASTENERS
3.0m high wall where ordinary
concrete is to be placed at 10°C
progressively over a 1 hour period.
REIDBAR &
FITTINGS
Case 1 where
P max = DH C1 = 1.0 = Shape co-efficient
= 24 x 3 C2 = 0.3 = Material co-efficient
= 72kPa
D = 24 = Weight density – kN/m3
Case 2
P max = D[C1√R + C2K√(H-(C1√R) ] H = 3 = Vertical height form (metres)
= 24[1.0 √3.0 + 0.3 x 1.92√(3-1.0√3) ] K = 1.92 = Temperature co-efficient (36/(T+16))2
CONCRETE
= 24[1.732 + 0.649] R = 3 = Rate of concrete pour (m3/hr/m)
SYSTEMS
LIFTING
= 57.14kPa T = 10 = Concrete temperature (°C)
Average stress on the vertical stud in the lower bay = 47.5 kPa
Load/per metre = 47.5 x 0.3 = 14.25 kN/m
Max load on 200 x 50 No. 2 frame grade
radiata pine spanning 1.0m = 18kN/m -> so OK!
NIRVANA
Conclusion: Use 200 x 50 vertical studs
Check load on lower Reidbar formwork ties
TM
TM
Maximum design working load for the RB16 formwork tie = 67.4 kN... so OK!
Whaling design
Design load 38 x 1.0 x 0.5 = 19 kN/m
Max design load for 200 x 50 Waling over a span of 0.9m = 24kN/m
CHANNELS
93
© Copyright Reid™ Construction Systems 2007. All rights reserved. Moral rights asserted.