Академический Документы
Профессиональный Документы
Культура Документы
KAD/ADC/012/C/1V, KAD/ADC/012/C/100M
KAM/ADC/012/C/40V, KAM/ADC/012/C/10V
KAM/ADC/012/C/1V, KAM/ADC/012/C/100M
KAD/ADC/012
24-channel D/E analog-to-digital converter
DESCRIPTION
The KAD/ADC/012 is used to condition and digitize up to 24
D/E analog channels.
At the heart of the KAD/ADC/012 is a hard-wired state
machine that over-samples all channels and digitally filters
any noise above the user-programmable cutoff frequency.
This is achieved using cascaded, half-band, decimate by two,
15-tap, finite-impulse-response (FIR) filters with 32-bit
coefficients.
The signal conditioning on KAD/ADC/012 consists of a
fixed-gain instrumentation amplifier with additional
FEATURES attenuation resistors at the input stage. The combination of
• 24 Differential Ended (D/E) input channels instrumentation amplifier and attenuation resistor used
• Programmable digital gain, offset and filter cutoff for each defines the input range options of the card: ±40V (with
channel attenuation resistor), ±10V, ±1V and ±100mV. Secondary
• 14-bit simultaneous A/D sampling for each channel gain and offset are achieved digitally according to the
• Input ranges from ±100mV to ±40V requested range.
• ±0.3% FSR total error from all sources (no input
attenuation)
• ±0.55% FSR total error from all sources (with input
attenuation)
• Up to 17,500 samples per second per channel
• Up to 1.2kHZ bandwidth
APPLICATIONS
• Differential voltage measurements
Z3
R1
+
1 + ANALOG COUNTS
ANALOG(0) AMP DIGITAL UNITS
2 -
-
R2 Inst.amp 2nd order AAAF Digital filter Lookup
Z4
GND 51
KAD/ADC/012
For the 40V version only, Z3=resistor R3; and Z4=resistor R4
For other versions Z3 and Z4 are capacitors
R1/Z3 and R2/Z4 determine attenuation (optional)
Ordering Information
Part Number Description
KAD/ADC/012/C/40V KAD/ADC/012/C module with ±40V input range with 52-way double-density module top connector
KAD/ADC/012/C/10V KAD/ADC/012/C module with ±10V input range with 52-way double-density module top connector
KAD/ADC/012/C/1V KAD/ADC/012/C module with ±1V input range with 52-way double-density module top connector
KAD/ADC/012/C/100M KAD/ADC/012/C module with ±100mV input range with 52-way double-density module top connector
KAM/ADC/012/C/40V KAM/ADC/012/C module with ±40V input range with 51-way micro-miniature module top connector
KAM/ADC/012/C/10V KAM/ADC/012/C module with ±10V input range with 51-way micro-miniature module top connector
KAM/ADC/012/C/1V KAM/ADC/012/C module with ±1V input range with 51-way micro-miniature module top connector
KAM/ADC/012/C/100M KAM/ADC/012/C module with ±100mV input range with 51-way micro-miniature module top connector
By default, the standard mating connector (CON/KAD/002/CP for KAD modules; or ACC/CON/008/04 for KAM modules) is
included with each module in the shipment. Its part number will be added to the Confirmation of Order unless an alternative
option is specified (see the Cables data sheet). In this data sheet, KAD/ADC/012 refers to both the KAD and KAM version of the
module.
Revision History
Revision Differences Status
KAD/ADC/012/C Occasional accidental erasing of single EEPROM Recommended for new programs
address (FFFFF16) resolved
KAD/ADC/012/B Lower power consumption (1.5W) at 5V allows a 13U Not recommended for new programs
chassis to be filled with modules of this type
KAD/ADC/012 24-channel D/E analog-to-digital converter Not recommended for new programs
Related Products
Module Details
Related Documentation
Document Details
Data sheet text and specifications are subject to change without notice. © 2011 ACRA CONTROL. All rights reserved.
ACRA CONTROL INC, 26845 Point Lookout Road, Leonardtown, MD 20650, USA, Phone: (301) 475-6757, Fax: (301) 475-6786, Email: info@acracontrol.net
ACRA CONTROL LTD, Landscape House, Landscape Road, Dublin 14, Ireland, Phone: +353-1-2951264, Fax: +353-1-2951265, Email: mail@acracontrol.com
www.acracontrol.com