Академический Документы
Профессиональный Документы
Культура Документы
INSTALLATION GUIDE
Table of Contents
• A separate file structure of the source code (.sst) and the runtime code (.ssc).
• The ability to run current SabreScribe scripts (.ssc) files on MySabre Scribe
Developer runtime without modification.
Related After you have installed and configured MySabre Scribe, you may refer to the
Documents following resources for more information:
and Training
• MySabre Scribe Scripting Guide which helps you develop good scripts
• MySabre Scribe Scripting Reference which provides details about the commands
and other constructs of the scripting language
• FAQs (Frequently Asked Questions)
• MySabre Scribe Basic Training Class
Prior to installing MySabre Scribe Developer, you must have MySabre and legacy
SabreScribe design software already installed on your computer.
Note: If you have previously run SabreScribe scripts in MySabre, then the design
module has already been installed.
Note: If you do not already have legacy SabreScribe installed, please click the
MySabre Scribe Compiler on the MySabre Scribe Developer Downloads
page. For more information on installing legacy SabreScribe, please refer to
the MySabre Help Menu and go to “Install SabreScribe for MySabre (pdf).”
Downloads
The MySabre Scribe Developer requires that you download the Eclipse version 3.3.0
IDE and the MySabre Scribe Developer Plug-ins.
Please obtain this software only from the MySabre Scribe Developer Downloads
page on eServices site as it is essential that the correct version is used. Sabre has
packaged all the components of Eclipse needed for MySabre Scribe in the
download from Agency eServices.
Note: Because MySabre Scribe is built upon the Eclipse version 3.3.0
platform, you must install software components in the following order:
1. Eclipse version 3.3.0 IDE
2. MySabre Scribe Developer (Editor) Plug-in
3. MySabre Scribe Search Plug-in
For MySabre Scribe to function, you must first install the Eclipse version 3.3.0
platform.
1. Click Eclipse 3.3 (IDE) on the MySabre Scribe Developer Downloads page.
2. Unzip the files into a new directory of your choice where you will store all your
Eclipse files (for example, C:\Program Files\Eclipse). Make a note of the
location where it is installed, as you will be selecting it with the browse button or
typing this directory into the dialog boxes when you install the MySabre Scribe
plug-ins, below.
You must install the MySabre Scribe Plug-ins to create the Eclipse icon on your
desktop and load the enhanced scripting functionality. The (two) Plug-ins include the
MySabre Scribe Developer (Editor) Plug-in and the MySabre Scribe Search Plug-in.
1. Click the MySabre Scribe Developer (Editor) Plug-in on the MySabre Scribe
Developer Downloads page.
2. Unzip the files (MySabreScribeIDE.zip) to any local folder or your desktop.
3. Run the installer SABREscribeIDE.exe.
4. Click Next.
5. Click I Agree to agree to License Terms.
MySabre Scribe INSTALLATION GUIDE December 2007 Step One: Install the Eclipse version 3.3 IDE 4
6. Ensure that the default Sabre Environment path is
C:\Sabre|Apps|Scribe
9. Click Next.
MySabre Scribe INSTALLATION GUIDE December 2007 Step Two: Install MySabre Scribe Developer Plug-ins 5
10. Provide the installer with your directory path. It should point to the directory
where you unzipped Eclipse.
1. Click the MySabre Scribe Search Plug-in on the MySabre Scribe Developer
Downloads page.
2. Unzip the files (SearchPlug-inInstaller.zip) to any local folder or your desktop.
3. Run the SearchPlug-inInstaller.exe file in your local folder.
4. Agree to the License Terms.
MySabre Scribe INSTALLATION GUIDE December 2007 Step Two: Install MySabre Scribe Developer Plug-ins 6
5. Select the directory with Eclipse.
Note: If you previously added an Eclipse directory path when installing the
MySabre Scribe Developer Plug-in (described above), this directory
displays in the window; otherwise, the default directory displays.
6. Click Install.
MySabre Scribe INSTALLATION GUIDE December 2007 Step Two: Install MySabre Scribe Developer Plug-ins 7
Step Three: Setup Eclipse
Now that you have downloaded and installed the Eclipse 3.3.0 IDE and MySabre
Scribe plug-ins you must set up Eclispe.
Select a Workspace
MySabre Scribe INSTALLATION GUIDE December 2007 Step Three: Setup Eclipse 8
3. The Welcome Screen displays. Click X by the word Welcome to close this
screen.
3. Click OK.
MySabre Scribe INSTALLATION GUIDE December 2007 Step Three: Setup Eclipse 9
Create a Project for Existing Scripts
After you switch to the Sabre perspective, the Scribe Eclipse Platform displays, as
shown below.
Create a new Project Resource that contains existing Scribe scripts, as follows:
1. Select File >New >Project. The New Project window displays.
2. Select General >Project.
3. Click Next.
MySabre Scribe INSTALLATION GUIDE December 2007 Step Three: Setup Eclipse 10
4. Uncheck Use default location, as shown below.
MySabre Scribe INSTALLATION GUIDE December 2007 Step Three: Setup Eclipse 11
The project directory you just created displays in the Project Explorer.
8. In the Project Explorer, click the ‘+’ sign to expand list of scripts (i.e.,
"ScribeScripts").
MySabre Scribe INSTALLATION GUIDE December 2007 Step Three: Setup Eclipse 12
Change Properties and Preferences
Before using the Editor you must change the “text file encoding” property and the
text editor preference, as follows:
1. Right click your scripts project (i.e., ScribeScripts) in the Project Explorer and
select Properties. The properties for the project display, as shown below:
MySabre Scribe INSTALLATION GUIDE December 2007 Step Three: Setup Eclipse 13
5. From the Toolbar Menu, select Window >Preferences.
Change 6. Select General >Editors >Text Editors.Make the following changes:
preferences
for text 7. Make the following changes:
editors • Displayed tab width to 5
• Choose the Insert spaces for tabs checkbox
Ready to Click OK. You may now use the Editor for developing scripts.
Go!
Note: For more information on usage and scripting, refer to the FAQs, MySabre
Scribe Scripting Guide, and MySabre Scribe Scripting Reference Guide.
MySabre Scribe INSTALLATION GUIDE December 2007 Step Three: Setup Eclipse 14
Support Information
Please follow the suggestions below when you are speaking with support personnel.
When reporting issues to the Help Desk or Maintenance Team, the specialist may ask
which plug-in version you have.
You can check the plug-in version in two ways:
You may find the file in plug-ins directory of Eclipse. A plug-in name contains date
and hour of a build. For example, a plug-in named
com.sabre.scribeeditor_1.0.0.v200709261638.jar means that the plug-in was built 26
Sept 2007 at 16:38.
OR
Select Help >Eclipse SDK About >Plug-in Details from the Eclipse interface. Sort
by Provider and find Sabre, as shown below:
Note: In both of the examples mentioned above, the version of the plug-in is
v200709261638. Please be prepared to provide the support personnel
with all numbers following the ‘v’.
1. When advised of the availability of new MySabre Scribe Plug-In updates on the
eServices MySabre Scribe Developer Download page, please go to that page and
first click on the MySabre Scribe Editor Plug-in Download.
In general use, there should be no need to uninstall the MySabre Scribe Developer
plug-ins. Future updates to the plug-ins may be downloaded and installed directly on
top of the existing plug-ins.
There is no need to delete any files or to re-install Eclipse 3.3.0.
2. Please click on Next to run the Installer, Agree to License Terms, and Install
when complete.
3. When finished installing MySabre Scribe Developer (Editor) Plug-in, then click
on MySabre Scribe Search Plug-in Download, Next to run the Installer, Agree to
License Terms, and Install when complete.
In general use, there should be no need to uninstall the MySabre Scribe Developer
plug-ins. As described elsewhere in this document, future updates to the plug-ins
may be downloaded and installed directly on top of the existing plug-ins.
However, in the situation where a MySabre Scribe user may want to restore their
system and Eclipse version 3.3.0 platform to the state from the time before the
installation of the Developer (Editor) and Search plug-ins for whatever reason, it can
be accomplished via the following steps.
(It is suggested that Help Desk assistance be obtained if a MySabre Scribe user wants
to Uninstall the MySabre Scribe Plug-ins.)
In the Scribe directory (the same one that you pointed to in MySabre Scribe
Developer (Editor) installer wizard) you should find:
SABREscribeIDEUninstaller.exe
If you intend to uninstall MySabre Scribe Developer, run the .exe application file,
and then you should see following window:
In the Scribe directory (the same one that you pointed to in MySabre Scribe
Developer installer wizard) you should find:
SearchPluginUninstaller.exe
If you intend to uninstall MySabre Scribe Search Plug-In, run this application, then
you will see a similar window as for Uninstall MySabre Scribe Developer Plug-In
above. Follow the same instructions, and this will uninstall the MySabre Scribe
Search Plug-in.
Support is available to assist you with any questions related to your installation.
• Sabre Software Desk
– E-mail: applications.support@sabre.com
– U.S. & Canada: 1-866-334-7551
• Users in all other countries should contact their software support
representative
Be prepared to provide the following information
AGENCY INFORMATION
• Open your browser and choose “Help, About” to locate this information (for example, IE
6.0)
WORKSTATION CONFIGURATION
• Processor (for example, 1.70 GHz Dell • Screen Resolution (for example, 1024 x
Optiplex) 768, 16 bit color)
• RAM (for example, 250 MB) • Available hard drive space (for example,,
10 GB)
OPERATING SYSTEM
• Go to Start, Settings, Control Panel. Double click the Java Cup icon. The About tab
contains this information.
CONNECTIVITY
ISSUE
• Describe your issue have and the exact steps used when you noticed the issue. If
possible, please capture a screen shot of the issue.