Академический Документы
Профессиональный Документы
Культура Документы
Company Profile Chapter V : Research Data Analysis & Interpretation. Chapter VI : Conclusions and Suggestions. Bibliography
Chapter I
INVENTORY
MANAGEMENT
INTRODUCTION
The basic function of inventory is thus to insulate the production process from changes in the external factors not in control of management.. It decouples various interlinked functions and thus enables each function to conduct itself independently like Purchasing, Production, Marketing etc
Classification of Inventory Inventory is idle resources that have future economic value. It indicates that it may be available in different forms depending upon the production cycle stage it is in. Classification of inventory is done on this basis and thus the different classifications of inventory are as follows Raw materials - Raw materials are input goods intended for combination and/or conversion through the manufacturing process into semi-finished or finished goods. They change their form and become part of the finished product. Components and Parts - Just as raw materials are converted to finished goods in a manufacturing operation, components and parts are assembled into finished goods in an assembly operation. Maintenance, repair and operating Inventories (MRO) - These include parts, supplies, and materials used in or consumed by routine maintenance and repair of operating equipment, or in support of operations. In-process goods - These are goods in the process of manufacturing and only partially completed. They are usually measured for accounting purposes in between significant conversion phases. In-process inventories provide the flexibility necessary to deal with variations in demand between different phases of manufacturing.
Finished goods - These represent the completed conversion of raw materials into the final product. They are goods ready for sale and shipment. Resale goods - These are goods acquired for resale. Such goods may be purchased by a wholesaler for resale to distributors, or by distributors for resale to consumers, etc. Capital goods - These are items (such as equipment) that are not used up or consumed during a single operating period, but have extended useful lives and must be expensed over multiple operating periods. Tax laws require that such an item be capitalized, and a predetermined percentage of its cost be recognized as an expense each operating period, over a predetermined time frame, according to equipment classes. Construction materials - These are raw materials and components for construction projects such as a building, bridge, etc. Hard goods/soft goods - What one identifies as hard goods and soft goods will vary depending on the industry involved. For example, in data processing, hard goods include apparatus such as computers and terminals, while soft goods include software, data storage media, and the like. Inventory Control Systems Inventory control is concerned with minimizing the total cost of inventory. The three main factors in inventory control decision making process are: The cost of holding the stock (e.g., based on the interest rate). The cost of placing an order (e.g., for row material stocks) or the set-up cost of production. The cost of shortage, i.e., what is lost if the stock is insufficient to meet all demand. The third element is the most difficult to measure and is often handled by establishing a "service level" policy, e. g, certain percentage of demand will be met from stock without
delay.
1. Financial policies of the organization are sensitive in nature; the same could not be acquired easily. 2. Time constraint is another limitation to make the study more qualitative.
3. Another limitation of the study is collecting of data from finance department and warehouse superiors. It is very difficult; as they are they are too busy in discharging their own duties. 4. The study is limited to the Glass lining division of Nile Ltd.
Chapter II
RESEARCH METHODOLOGY
For the purpose of the study data has been selected covering from 2006-2007 to 20092010. Most of the data is based on the secondary data, personal discussions were held with employees of stores department and finance department of Nile ltd. The secondary data is the annual reports, other inventory valuation and quantity reports. The data collected from the secondary source is processed and analyzed for drawing inferences by applying simple statistical methods like percentage, average, etc.,. The technical analysis like economic order quantity and ABC analysis have been studies. Finally conclusions are drawn based on the study and suitable suggestions are made for improving the performance of Nile ltd.
Chapter III
Materials constitute the most significant part of the current assets of a large majority of companies in India. On an average, materials are approximately 60 percent of current assets in public limited companies in India. Because of large size of materials maintained by firms, a considerable amount of funds is required to be committed to them. It is, therefore, absolutely imperative to manage all aspects of material efficiently and effectively in order to avoid unnecessary investment. A firm neglecting the management of material will be jeopardizing its long-run profitability and many fail ultimately. It is possible for a company to reduce its level of material to a considerable degree, e.g., 10 to 20 percent, without any adverse effect production and sales, by using simple material planning and control techniques. The reduction in excessive stocking material carries a favorable impact on a companys profitability. Inventory is a list for goods and materials, or those goods and materials themselves, held available in stock by a business. In accounting inventory is considered an asset. In business management, inventory consists of a list of goods and materials held available in stock. Inventory management is primarily about specifying the size and placement of stocked goods. Inventory management is required at different locations within a facility or within multiple locations of a supply network to protect the regular and planned course of production against the random disturbance of running out of materials or goods. The scope of inventory management also concerns the fine lines between replenishment lead time, carrying costs of inventory, asset management, inventory forecasting, inventory valuation, inventory visibility, future inventory price forecasting, physical inventory, available physical space for inventory, quality management, replenishment, returns and
defective goods and demand forecasting. Balancing these competing requirements leads to optimal inventory levels, which is an on-going process as the business needs shift and react to the wider environment Systems and processes that identify inventory requirements, set targets, provide replenishment techniques and report actual and projected inventory status. Handles all functions related to the tracking and management of material. This would include the monitoring of material moved into and out of stockroom locations and the reconciling of the inventory balances. Also may include ABC Analysis, lot tracking, cycle counting support etc. Management of the inventories, with the primary objective of determining/controlling stock levels within the physical distribution function to balance the need for product availability against the need for minimizing stock holding and handling costs. The reasons for keeping stock There are three basic reasons for keeping an inventory: 1. Time - The time lags present in the supply chain, from supplier to user at every stage, requires that you maintain certain amount of inventory to use in this "lead time". 2. Uncertainty - Inventories are maintained as buffers to meet uncertainties in demand, supply and movements of goods. 3. Economies of scale - Ideal condition of "one unit at a time at a place where user needs it, when he needs it" principle tends to incur lots of costs in terms of logistics. So bulk buying, movement and storing brings in economies of scale, thus inventory.
NATURE OF MATERIAL: Materials are stock of the products a company is manufacturing for sale and components that make up the products. Most manufacturing organizations usually divide their "goods for sale" inventory into: Raw Materials- materials and components scheduled for use in making a product. Work in process, WIP - materials and components that have begun their transformation to finished goods. Finished goods - goods which are ready for sale to customers. Goods for resale - returned goods that are saleable.
RAW MATERIALS: Raw materials are those basic inputs that are converted into finished products through the manufacturing process. Raw materials are those units which have been purchased and stored for future production. They are required to carry out production activities uninterruptedly. The quantity of raw materials required will be determined by the rate of the consumption and the time required for replacing the supplies. The factors like the availability of raw materials and government regulations, etc., too affect the stock of raw materials. Raw material turnover ratio indicates the number of time materials is replaced during the year. To judge whether the ratio of a firm is satisfactory or not, it should be compared over a period of time of the basis or trend analysis. In general, a high material turnover is better than a low ratio. Yet a very high ratio calls for a careful analysis. It indicates of under investment in very low level of inventory has serious implications. It is also likely that the firm may be following a policy of replenishing it stock in too many small sizes. Similarly, a very low material turnover ratio is dangerous. It signified excessive material or over investment. Carrying excessive inventory involves the cost in terms of interest of funds of rentals space and so on. Thus a firm should have neither too high nor low material turnover.
To avoid stock out list associated with a high ratio and the cost of carrying the excessive material; there should be reasonable level for mixed ratio. The firm would well advise to maintain a close watch on the trend of ratio. Inventory turnover ratio can be calculated as follows: Inventory Turnover Ratio = Cost of Goods sold or Turnover Average Inventory
WORK IN PROCESS: Work in process is called as stock in process. It refers to goods in the intermediate stage of production. These are semi finished product for sale. They represent products that need more work before they become finished product for sale. The work in process is that stage of stock which is in between raw materials and finished goods. The raw materials enter the process of manufacturing but they are yet to attain the final shape of finished goods. The quantum of work in process depends up on the time taken in manufacturing; the more will be the amount of work in process. FINISHED GOODS: The finished goods materials are those completely manufactured products which are ready for sale. Stocks of raw materials and work in process facility production, while stock of finished goods is required for smooth marketing operations. These are goods, which are ready for consumers. The stocks of finished goods provide buffer between the production and market. The purpose of maintaining material is to ensured proper supply of goods to the customers. In some concerns the production is undertaking on order basis. In these concerns there will not be a need for finished goods inventory. The need for finished goods stock will be more when production is under taken in general without waiting for specific orders. Those, inventory serve as the link between the production and consumption of goods.
The levels of three kinds of inventories for a firm depend on the nature of its business. A manufacturing firm will have substantially high levels of three kinds of materials, while retail or wholesale firms will have a very high level of finished goods in material and work in process stock. With in manufacturing firms there will be differences. Large heavy engineering companies produce long production cycles products; therefore, they carry large materials. On the other hand, materials of consumer Product Company will not be large because of short production cycle and fast turnover. A fourth kind of materials, supplies is also maintained by firms. These materials do not directly enter production, but are necessary for production process. Usually these supplies are small part of total material and do not involve significant investment. SPARES: The stock policies of spares differ from industry to industry. Some industries like transport will require more spares than the other concerns. The costly spares parts like engines, maintenance spares etc., are not discarded after use, rather they are kept in ready position for further use. All decisions about spares are based on the financial cost of inventory on such spares and the cost that may arise due to their non-availability NEED TO HOLD MATERIALS: The question of managing materials arises only when the company holds the material. for manufacturing end products for sale. Stocking of Materials involves blocking up the companys resources in currency, storage and handling costs. generally motivate for holding materials. TRANSACTION MOTIVE: Every firm tends to maintain some level of inventory to meet the day to day requirements of sales, production process and customers demand etc. in this; raw materials are stored for smooth production process of the firm. If it is expensive to maintain materials, why do companies holds materials? There are three resources which Therefore, a sophisticated system of inventory control may not be maintained for them.
PRECAUTIONARY MOTIVE: A firm should keep some inventory for unforeseen circumstances also like
loss due to natural calamities in a particular area, strikes, layouts etc. So the firm must have some finished goods as well as raw-materials to meet circumstances. SPECULATIVE MOTIVE: Influences the decision to increase or reduce material level to take advantage of price fluctuation. A company should maintain adequate stock of materials for a continuous supply to the factory for an uninterrupted production. It is not possible for a company to procure raw materials whenever it needed. A time lag exists between demand and supply. Also, there exists uncertainly in procuring raw materials in time on many occasions. The procurement of materials may be delayed because of such factors as strike, transport disruption or short supply. Therefore, the firm should maintain sufficient stock of raw materials at a given time to streamline production. Other factors which may necessitate purchasing and holding of raw material inventories are quantities of raw materials than needed for the desired production and sales level to obtain quantity discounts of bulk purchasing. At time, the firm would like to accumulate raw materials in anticipation of price rise. Work in process material builds up because of the production cycle. Production cycle is time span between introduction of raw material into production and emergence of finished product at the completion of production cycle. Till production cycle completes, stock of work in process has to be maintained. Efficient firm constantly try to make production cycle smaller by improving their production techniques. Stock of finished goods has to be held because production sales are not instantaneous. A firm cannot produce immediately when goods are demanded by customers. Therefore, to supply finished goods on a regular basis, their stock has to be maintained. Stock of finished goods has also to be maintained for sudden demands from customers. In case the firms sales are seasonal in nature, substantial finished goods material should be kept to meet the peak demand. Failure to supply products to customers, when demanded, would mean loss of the firms sales to competitors. The level of finished goods materials would depends upon coordination between sales and production as well as on production time.
Costs: The holding of inventories exposes the firm to certain risks. The various costs and risk involved in holding are given below. Capital Cost: The holding of inventories includes cost. So, the firm has to arrange for additional funds in order to meet the cost of inventories. These funds may be arranged from the firms sources or from outsiders. In both cases, the firm has to incur a cost. Storage and Handling Cost: Holding inventories also involves costs on storage. For holding inventories in advance, for sufficient stock, for uninterrupted production, the business has to pay for storage costs. The storage costs include the rent of the warehouse, insurance charges etc. The costs of holding inventories are as follows: Material Costs: This is the cost of purchase of goods, transportation, handling charges. Ordering Costs: This is a variable cost associated with placing an order. Few orders mean less cost and more orders mean more cost. Carrying Costs: This basically includes expenses of storage of goods. The costs are storage cost, insurance cost, spoilage cost, cost of funds tied up in inventory etc. LEAD TIME: It is the time taken by the supplier to supply the materials. Technically it is the period which lapses between the recognition of need and its fulfillment. There is a direct relationship between lead time and inventory. As lead time increases, inventories also increase. The lead time can be divided into administrative lead time, manufacturing lead time, transportation lead time, inspection lead time etc.
RE-ORDER POINT: It indicates when an order should be placed; it depends upon consumption ratio and lead time. RE-ORDER POINT = (LEAD TIME* AVERAGE USAGE) SAFETY STOCK: Using the above formula, it is difficult to predict usage and lead time accurately. The demand for material may fluctuate from the normal lead time. If the actual usage increases or the delivery of the material is delayed the firm can face a problem of stockout. Therefore, in order to guard against the stock-out, the firm may maintain a safety stock i.e., some minimum or buffer material as cushion against expected increased usage and/or delay in delivery in time. Thus the formula to determine the re-order point when the safety stock is maintained is as follows: RE-ORDER STOCK ORDER CYCLE: The time period between placements of two successive orders is referred to as an order cycle. There are two inventory management system based on which the orders may be placed. They are as follows: Q-system: (Fixed order quantity system or re-order point system). P-system: (Fixed periodic review system). REORDER LEVEL: The inventory level at which a new or fresh order is placed with the suppliers for obtaining additional items is known as reorder level. This point is fixed between the maximum stock and minimum stock levels. This depends on two factors: The lead time between order placement and actual receipt, and The demand during the lead time. POINT= (LEAD TIME*AVERAGE USAGE) + SAFETY
This is the quantity of the replacement order. In certain types of inventory control system, the reorder quantity is the economic order quantity. MAXIMUM STOCK LEVEL: A stock level selected as the maximum desirable or allowable is referred to as maximum stock. This is used as an indicator to show when stock levels have risen too high. The maximum level is the largest quantity of a particular material, which should be kept in store at any one time. The fixation of maximum level is necessary to avoid unnecessary blocking of capital in materials, losses on account of deterioration and obsolescence of materials, extra overheads and temptation to thefts. The maximum level of materials should be decided after considering the following: Storage space Availability of working capital Cost of storage, insurance, interest on capital invested in stock. Rules framed by government for import or procurement.
MINIMUM STOCK LEVEL: It is also known as buffer stock or safety stock. This is the additional stock needed to allow for delay in delivery or for any unexpected demand that may arise during the lead time. IMPORTANCE OF INVENTORY MANAGEMENT TO A BUSINESS: Inventory Management is the planning, control, organizing and leading the goods and materials required by the business. Inventory Management is very important for the business. It enables the business to meet or exceed expectations of the customer by making the product readily available. If managed properly, it can help the organization reduce its costs, achieve economies of scale and prepares the organization for uncertainty.
OBJECTIVES OF INVENTORY MANAGEMENT: To maintain a optimum size of material for efficient and smooth production and sale operations.
Both excessive and inadequate materials are not desirable. These are two danger points within which the firm should operate. The objective of material management should be to determine and maintain optimum level material investment. The optimum level material will lie between the two danger points of excessive and inadequate inventories. The firm should always avoid a situation of over investment or under investment in materials. The following are the main objectives of inventory management
To ensure continuous supply of materials to facilitate uninterrupted production. Maintain sufficient stocks of raw materials against slack period supplies and benefit from price changes. Maintain sufficient finished goods inventory for smooth sales operation and customer service. Reduce the cost of production carrying cost and time. To minimize losses through wastages and damages. To ensure quality goods at reasonable prices. It controls investment in inventories and keeps it at an optimum level. To ensure uninterrupted production. To facilities furnishing of data for short-term planning and control of inventory
TECHNIQUES OF INVENTORY MANAGEMENT: ECONOMIC ORDER QUANTITY: There are two questions relating to material management: 1. What should be the size of the Order? 2. At what level should the order placed? To answer the first question the basic economic order quantity model is helpful. If the firm is buying raw material, it has to be purchased on each replenishment. This problem is called order quantity problem and the task of the firm is to determine the optimum or EOQ. The determination of the appropriate quantity to be purchased in each lot to replenish stock as a solution to the order quantity problem necessitate resolution of conflicting goals buying in large quantities implies a higher inventory level which will assure. Smooth production/sales operations. Lower ordering or set up costs.
But it will involve higher carrying costs. On the other hand small orders will reduce the carrying costs would increase as there is a likelihood of interruption the operations due to stock outs. A firm should place neither too large nor too small orders on the basis of trade off between the benefits from the availability of inventory and the cost of carrying. To take enough care to avail the concession available in purchasing materials. Ensuring that the materials of requisite specifications and quality have been received in good condition. EOQ = (2AO/I) Where, A = Annual Total Requirement, O = Ordering Costs, I = Inventory Carrying Costs.
ABC ANALYSIS: ABC analysis is a technique of exercising selective control also known as management by exception;over inventory items. The technique is based on the According to this assumption that a firm should not exercise the same degree of control on items which are more costly as composed to those items which are less costly. approach the inventory items are divided into three categories i.e., A, B and C. Category A may include more costly items, while category B may consists of less costly items and category C of the least costly items. Therefore, ABC analysis concentrates on important items hence also known as Control by Importance and Exception (CIE). This approach is also known as Proportional Value Analysis (PVA). There is no definite procedure for classifying the inventories as A, B and C categories. The method usually adopted is, 1. The quantity of each material expected to be used is estimated. 2. The value of each of the above material is found out by multiplying quantity with price. 3. The items are arranged in the descending order of their value irrespective of their quantities and give the ranks. 4. Express the value for each item as a percentage of the aggregate usage value and obtain the cumulative percentage of annual usage values. 5. Obtain the percentage value for each of the items. For n items, each item shall represent 100/n percent. Also obtain the cumulative values of the percentages. 6. Plot the curve using the cumulative computed in step 4 and step 5 on x and y axes respectively. 7. Determine appropriate divisions for the A, B and C categories. In general, normal inventory item possess the following distribution pattern. A: 5- 10% of the total number of items account for about 70% of the total consumption value.
B: 10-20% of the items account for 20% of total consumption value. C: The remaining large number of items account for the balance 10% of the consumption value.
Chapter IV
Product range of the company includes: Reactors Reactors with Conical bottom Reactor with Insulation Receivers (Jacketed &Unjacketed)/ Storage Tanks Conical Dryer Agitated Nutsche Filters Heat Exchangers /Condensers Columns Lead products Pure Lead 99.97% purity Lead Antimonial alloys Lead Selenium alloys Lead Calcium alloys Lead Tin alloys
Chapter V
ABC ANALYSIS
ABC ANALYSIS FOR THE YEAR 2009-10 In the year 2009-2010 the total annual value of material is Rs. 201278053. The materials are divided into A category, B category and C category according to annual consumption. The ABC Analysis table is as follows
cost per unit 44334 44319 44296 49496 119 27116 49456 23730 21376 49773 955 320 31756 49397 286 33474 34296 20 137 67388 27577 2892 1200 400 15125 6 43000 53364 6354 3570 15 15581 46704 1525 322
no. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
material description steel plates(12,14,18,20,25)mm steel plates(8,16,22,32)mm steel plates(6,10,36,40,45,50,63,65)mm rods(80,100,122)dia chemicals mechanical seal(60,80,100)mm rods(50,180,240,250)dia gear box(as-55,60,35,RR210DNC,110DNC) motors(3,7,5,10)hp accuators and variable frequency drive mildsteel seemless pipes electrodes(E7018) forgings(flanges) rods packaging material standguard and stand drive mechanical seal(50,125)mm hardware paints gearbox(AS-80,90F) motors(5,15,20)hp forgings(nozzles) teflon items(gaskets) electrodes(E7018-1) mechanical seal(40mm) others in boughtout(sight and light glasses,hoses) abbressive material(grit) imported general stores(ceramic crucibles) teflon items(dippipes/sparges) castings(valve bodies) others from general stores(oils, greases, hotmill jars, handgloves,nosemasks, glasses,cap) gearbox(RR310DNC,510DNC) motors 25hp stainless steel seemless pipes castings(rods and plates)
annual consumption 1002 702 301 233 59770 240 127 23 251 98 3680 10716 102 63 10738 85 80 121943 17043 34 81 752 1529 4286 108 270985 36 29 240 425 97289 90 28 768 3392
annual value 44444448 31111113 13333334 11515178 7087018 6584928 6281006 5600280 5365376 4877724 3514400 3429120 3239112 3112011 3071068 2845339 2743680 2438862 2334891 2291192 2233737 2174784 1834803 1714418 1633500 1625908 1548000 1547556 1524960 1517250 1459335 1402345 1307712 1171200 1092224
36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71
electrodes(E316,316L,6013) tantalum teflon items(bushes/nozzles) electrical items imported chemicals oxygen gas flux wires castings(nozzles) teflon items(gasket sheets) diesel imported tantalum job bearing castings(sleeves) bearings LPG teflon items(spray ball) shafts teflon items(spacers/seperators) teflon items(tapes/'o' rings) screws and rods material handling grinding machines abbressive material(sand) grinding wheels other in maintence(low value spares, lubricants) hoses and pipes indegnous grind wheels and belts blasting accessories elements seperators tool bit argon gas imported boughtout(gear box) measuring tapesand scales wind mill spares others in tools(spanners,lowvalue jigggs,fixtures) cutting accessories
385 27 950 5414 1515 6644 7620 885 500 13606 12 812 40 1166 131 17 20 3072 7702 42 347 12 30 48 1056 159 1981 52 6 33 61 1 103 4 1226 28
1500 37516 1040 176 610 123 90 770 1350 37 38560 500 9500 250 2221 16256 10412 56 22 3718 435 10115 4000 2284 98 523 42 1502 12147 2025 950 41764 365 4637 22 574
1027500 1012932 988000 952864 924150 817212 685800 681450 675000 503422 462720 406000 380000 291500 290951 276352 208240 172032 169444 156156 150945 121380 120000 109632 103488 83157 83202 78104 72882 66825 57950 41764 37595 18548 26972 16072
A Occupies 70% of Annual consumption, i.e., 70% of 201078053 = 140894637. B- Occupies 20% of Annual consumption, i.e., 20% of 201078053 = 40255610. C- Occupies 10% of Annual consumption, i.e., 10% of 201078053 = 20107805
50000000 45000000 40000000 35000000 30000000 25000000 20000000 15000000 10000000 5000000 0 1 5 9 13 17 21 25 29 33 37 41 45 49 53 57 61 65 69 annual value no.
no. 1 2 3 4 5 6 7 8 9 10 11
material description steel plates(12,14,18,20,25)mm steel plates(8,16,22,32)mm steel plates(6,10,36,40,45,50,63,65)mm rods(80,100,122)dia chemicals mechanical seal(60,80,100)mm rods(50,180,240,250)dia gear box(as55,60,35,RR210DNC,110DNC) motors(3,7,5,10)hp accuators and variable frequency drive mildsteel seemless pipes
no. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
material description electrodes(E7018) forgings(flanges) rods packaging material standguard and stand drive mechanical seal(50,125)mm hardware paints gearbox(AS-80,90F) motors(5,15,20)hp forgings(nozzles) teflon items(gaskets) electrodes(E7018-1) mechanical seal(40mm) others in boughtout(sight and light glasses,hoses) abbressive material(grit) imported general stores(ceramic crucibles) teflon items(dippipes/sparges)
annual consumption 10716 102 63 10738 85 80 121943 17043 34 81 752 1529 4286 108 270985 36 29 240
cost per unit 320 31756 49397 286 33474 34296 20 137 67388 27577 2892 1200 400 15125 6 43000 53364 6354
annual value 3429120 3239112 3112011 3071068 2845339 2743680 2438862 2334891 2291192 2233737 2174784 1834803 1714418 1633500 1625908 1548000 1547556 1524960 41342941
no. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
material description castings(valve bodies) others from general stores(oils, greases, hotmill jars, handgloves,nosemasks, glasses,cap) gearbox(RR310DNC,510DNC) motors 25hp stainless steel seemless pipes castings(rods and plates) electrodes(E316,316L,6013) tantalum teflon items(bushes/nozzles) electrical items imported chemicals oxygen gas flux wires castings(nozzles) teflon items(gasket sheets) diesel imported tantalum job bearing
annual consumption 425 97289 90 28 768 3392 385 27 950 5414 1515 6644 7620 885 500 13606 12 812
annual value 1517250 1459335 1402345 1307712 1171200 1092224 1027500 1012932 988000 952864 924150 817212 685800 681450 675000 503422 462720 406000
19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42
castings(sleeves) bearings LPG teflon items(spray ball) shafts teflon items(spacers/seperators) teflon items(tapes/'o' rings) screws and rods material handling grinding machines abbressive material(sand) grinding wheels other in maintence(low value spares, lubricants) hoses and pipes indegnous grind wheels and belts blasting accessories elements seperators tool bit argon gas imported boughtout(gear box) measuring tapesand scales wind mill spares others in tools(spanners,lowvalue jigggs,fixtures) cutting accessories
40 1166 131 17 20 3072 7702 42 347 12 30 48 1056 159 1981 52 6 33 61 1 103 4 1226 28
9500 250 2221 16256 10412 56 22 3718 435 10115 4000 2284 98 523 42 1502 12147 2025 950 41764 365 4637 22 574
380000 291500 290951 276352 208240 172032 169444 156156 150945 121380 120000 109632 103488 83157 83202 78104 72882 66825 57950 41764 37595 18548 26972 16072
A B C
Inventory turnover ratios are calculated to indicate whether inventories have been used efficiently or not. The inventory turnover ratios also known as stock velocity is normally calculated as sales / average inventory of cost of goods sold/average inventory. Inventory conversion period may also be calculated to find the average time taken for clearing the stocks. Symbolically. Cost of goods sold Inventory turnover ratio = ------------------------------Average inventory at cost Or
Interpretation: In 2007-08 stocks are converted into cash/accounts receivable faster when compared to the years 2008-09 and 2009-10. The turnover ratios is 1.63 in the year 2007-08 was gradually decreased to 1.09 by the year 2009-10. This means the stock has not been sold fast and stayed on the shelf for a longer period. This ratio is decreased because of decrease in the sales and increase in average inventory. An efficient management of inventory lies in higher inventory turn over ratio.
INVENTORYHOLDING PERIOD:
Interpretation: In 2007-08 the inventory holding period is less when compared to the years 2008-09 and 2009-10 respectively. In the year 2007-08 the inventory holding period was 221 days and it was increased to 225 days by the year 2008-09 and further it is increased to 331 days by the year 2009-10. These mainly because of the sales are gradually decreasing from year to year. The ratio is gradually increasing from year to year.
2007-08
2008-09
2009-10
Interpretation: In year 2006-07 it was 59.79% and it is gradually increased to 59.84% by the year 200708 and further it is increased to 62.90% & 67.72% by the years 2008-09 and 2009-10 respectively. The Inventory is increasing from year to year but the other assets are not increasing as the inventory.
2006-07
2007-08
2008-09
2009-10
ECONOMIC ORDER QUANTITY: Suppose the ordering cost per order 0 is fixed. The order costs will be number of
orders during the year multiply by ordering cost per order. If A represents the annual requirements and Q the order size, the number of orders will be A/Q and the total orders costs will be
Q = Order size, C = Carrying costs per unit. Let us further assume that the carrying costs per unit C are constant. The total carrying costs will be the product of the average materials units and the carrying costs per unit. If Q is the order size and the usage is to be steady, the average material will be. Q Average Material = ----------------2 --------------------------------- (2)
The Total material costs, then are the sum of total carrying and ordering costs: QC Total Cost = -----------2 AO + -----------Q ---------------------- (4)
Calculate (4) reveals that a large quantity, Q the carrying costs will increase, but the ordering costs will decrease. On the other hand the carrying cost will be lower and the ordering cost will be higher with the lower order quantity. Thus the total cost function represents a trade-off between the carrying cost and the ordering cost for determining the economic order quantity. To obtain formula for economic order quantity (EOQ), equation (4) is differentiated with respect to Q and setting the derivative equal to zero.
Differentiating Equation (a) with respect to Q D (TC) -----------------DA + C ------------------2 AO ----------Q ---------------- (b)
EOQ
= SQRT (2AO/C)
-------------------------------- (5)
Sl. No.
Code
Material Description
value
1 2 3 4 5 6 7 8 9 10 11 12
RNST RNBO RNRO GNOT RNCA RNTI RNFI RNSP RNCA GNWP GMOT GNM --
Steel Plates (tons) Bought Outs(Nos) Rods (tons) General Items(Nos) Chemicals(kgs) Teflon Items (Nos) Forgings (Nos) Pipes and Fittings ( Mts) Castings (Nos) Packing Material (Set) Imported General
2004,929.00 344,594.00 423,114.00 116,625.00 59,770.00 14,010.00 855.00 5,066.00 5,107.00 10,738.00 57.00 2,848.00
88,888,897 40,647,703 20,936,688 14,593,351 7,087,018 5,648,844 5,437,192 4,686,741 4,544,214 3,073,419 2,212,421 1,041,281
Stores(Nos) Maintenance(Nos) 4%
Ordering Cost
Calculation of EOQ using the above information: 1. RNST Steel Plates: Annual consumption Ordering Cost = = Rs.2004,929.00 Rs.355,556
Rs.11,111,112.13
EOQ = ((2) (2004929) (355556)/11,111,112) = 128,315.606 = 358.21 tons = 358 tons. 2. RNBO Bought Outs: Annual consumption Ordering Cost Carrying Cost = 344,594.00 = Rs.185,908. = Rs.5,080,963.
EOQ = ((2) ( 344,594.00) (185908)/5080963) = 25216.79 = 158.78 Nos = 159 Nos. 3. RNRO Rods: Annual consumption Ordering Cost Carrying Cost = 423114 = Rs. 837468 = Rs. 2617086
EOQ = ((2) (116625) (583734)/1824169) = 273 Nos. 5. RNCA Chemicals: Annual Consumption Ordering Cost Carrying Cost = 59770
= Rs.283481 = Rs.885877
EOQ = ((2)( 59770)(283481)/885877) = 195 Kgs. 6. RNTI Teflon Items: Annual Consumption Ordering Cost Carrying Cost = 14010
= Rs.225954 = Rs.706106
= Rs.217488
Carrying Cost
Rs.679649
EOQ = SQRT ((2)( 855)(217488)/679649) = 23 No 8. RNSP Pipes & Fittings: Annual Consumption Ordering Cost Carrying Cost = 5066
= Rs.187470 = Rs.585843
EOQ = SQRT ((2) (5066) (187470)/585843) = 57 Mts. 9. RNCA Castings: Annual Consumption Ordering Cost Carrying Cost = 5107
= Rs.181769 = Rs.568027
10. GNWP Packing Material: Annual Consumption Ordering Cost Carrying Cost = 10738
= Rs.122937 = Rs.384177
EOQ = ((2)( 10738)(122937)/384177) 11. GMOT Imported General Stores: Annual Consumption Ordering Cost Carrying Cost = 57
= 83 Sets.
= Rs.88497 = Rs.276553
EOQ = (2)( 57)(88497)/276553) = 6 Nos. 12. GNM Maintenance: Annual Consumption Ordering Cost Carrying Cost = 2848
TABLE-2 STATEMENT SHOWING EOQ SL. NO CODE MATERIAL DESCRIPTION ANNUAL CONSUMPTION ORDERING CARRYING EOQ COST COST UNITS
1 2 3 4 5 6
Steel Plates Bought Outs Rods General Stores Chemicals Teflon Items
358 Tons 158 Nos 520 Tons 273 Nos 195 Kgs 94 Nos
7 8
RNFI RNSP
855 5066
217488 187470
679649 585843
23 Nos 57 Mts
RNCA
Castings
5107
181769
568027
57 Nos
10
GNWP
Packing Material
10738
122937
384177
83 Sets
11 12
GMOT GNM
57 2848
88497 41651
276553 130160
6 Nos 43 Nos
INTERPRETATION: The company will do well to follow the E O Q as far as possible to improve the inventory turn over ratio. TABLE-3 STATEMENT SHOWING LEAD TIME CONSUMPTION Average Consumption = Annual Consumption/365.
Lead time consumption = Lead time * Average consumption per day. SL. NO CODE 1 2 3 4 5 6 7 8 9 10 11 12 RMCH GMOT RMBO RNST RNBO RNCA RNCH RNFI RNSP RNRO RNTI GNWP MATERIAL DESCRIPTION Imported Chemicals Imported Stores Imported LEAD TIME 90 days AVG. CONSUMPTION LEAD PER DAY 1515/365=4.15 57/365=0.16 1/365=0.003 2004929/365=5492.96 344594/365=944.09 5107/365=13.99 59770/365=163.75 855/365=2.34 5066/365=13.88 423114/365=1159.22 14010/365=38.38 10738/365=29.42 TIME
CONSUMPTION 373.50 14.40 0.27 494366.40 70806.75 839.40 7368.75 140.40 416.40 52164.90 575.70 235.36
General 90 days Bought 90 days 90 days 75 days 60 days 45 days 60 days 30 days 45 days 15 days 8 days
outs Steel Plates Bought Outs Castings Chemicals Forgings Pipes & Fittings Rods Teflon Items Packing Materials
TABLE-4 STATEMENT SHOWING RE-ORDER LEVEL: Re-order level = (Lead time * Average Usage) + Safety stock SL NO. CODE MATERIAL LEAD TIME SAFETY RE-ORDER
1 2 3 4 5 6 7 8 9 10 11 12
RMCH GMOT RMBO RNST RNBO RNCA RNCH RNFI RNSP RNRO RNTI GNWP
DESCRIPTION CONSUMPTION STOCK Imported 373.50 390.00 Chemicals Imported 14.40 21.00 1.00 497400.00 70900.00 843.00 7370.00 142.00 420.00 52170.00 610.00 247.00
LEVEL 763.50 35.40 1.27 991766.40 141706.75 1682.40 14738.75 282.40 836.40 104334.90 1185.70 482.36
General Stores Imported Bought 0.27 outs Steel Plates Bought Outs Castings Chemicals Forgings Pipes & Fittings Rods Teflon Items Packing Materials 494366.40 70806.75 839.40 7368.75 140.40 416.40 52164.90 575.70 235.36
TABLE-5 STATEMENT SHOWING MAXIMUM STOCK LEVEL: MAXIMUM STOCK LEVEL = RE-ORDER LEVEL + EOQ
SL NO. 1
CODE
MATERIAL DESCRIPTION
EOQ
RMCH
Imported Chemicals
31
763.50
GMOT
35.40
41.40
3 4 5 6 7 8 9 10 11 12
RMBO RNST RNBO RNCA RNCH RNFI RNSP RNRO RNTI GNWP
Imported Bought outs Steel Plates Bought Outs Castings Chemicals Forgings Pipes & Fittings Rods Teflon Items Packing Materials
1.27 991766.40 141706.75 1682.40 14738.75 282.40 836.40 104334.90 1185.70 482.36
2.27 992124.40 141864.75 1739.40 14933.75 305.40 893.40 10485.90 1279.70 565.36
Chapter VI
CONCLUSIONS
AND SUGGESTIONS
Over all the inventory of Nile Limited - glass lining division is maintained at optimal levels in the present market conditions, but a higher inventory turn over ration above 1.63 times should be targeted to improve the profitability.
Sales are decreasing according to the study; revenue of the company is decreased during the period 2007 to 2010. This impacts severely on the profitability and liquidity position of the organization. An improvement n the inventory turn over ratio may improve the profitability
During the study period, the inventory to current assets ratio is gradually increasing, which indicates proportion of inventory in current assets is expanding. the requirement for production/sales should be re assessed and an Endeavour to reduce the inventory may improve the prospects of profitability.
The inventory turnover ratio is gradually decreasing from year to year. It is not healthy to the company as more than required inventory leads to blocking of capital. The firm should maintain reasonable stocks with the help of inventory control.
The inventory conversion period is also increasing from year to year. Huge inventory holding leads to blocking of cash, obsolescence, or deficiencies in the product line or marketing effort. Over production or early production of goods even before the customer requires them lead to poor inventory holding period.
According to the ABC Analysis throughout this period, A-items i.e. top 20 per cent of items constituted around 90 per cent total annual consumption in value.
In the last year the closing stock is almost equal to the sales which require correction.
SUGGESTIONS:
1.
without interruption keeping in view costs of over stocking vis--vis the benefits of more than required stock. 2. The companys production should be re-scheduled dynamically according
to the marketing forecast to avoid overstocking of finished goods. 3. The company should closely monitor the inventories for optimum
utilization, so that idle inventories can be minimized. 4. Priority in managing the purchase and utilization should be given to Plates, Bought outs and
Rods. Strict control is to be ensured for materials classified as B. 5. Search for alternate suppliers and materials to be used in production to
decrease the cost of holding huge inventory and lead time for procurement of materials. 6. The investment in raw materials should be made with close monitoring
and optimum utilization. 7. Investment in slow moving items may block up the funds therefore the
company may consider using F N S D analysis. (Fast normal slow moving and dead items.). 8. The raw material should be procured from right source at right quantity
BIBLIOGRAPHY:
S.no.
Title
Author
1.
Financial Accounting
I.M.PANDEY
2.
3.
Cost Accounting
R.P.TRIVEDI
4.
Internet websites
www.nileltd.com www.google.com