Вы находитесь на странице: 1из 4

Boysen The Number 1 Paint - The Leading Paint Manufacturer - products

http://www.boysen.com.ph/products.do?item_id=642

Home

About Boysen

News

Facilities

Products

Colors

MSDS

Locate A Dealer

Contact Us

Home Products Wallguard Boysen Wallguard Dirt Resisting Latex #5715

Products
Acrylic Water Based Coating Enamel Based Coating Wood Stains Lacquer Based Coating Acrylic Solvent Based Coating Epoxy Based Coating Polyurethane Based Coating Surface Preparation Chemicals Nation Paints Air Cleaning Paint Boysen Affiliates

Featured Products
Wallguard

Boysen Wallguard Dirt Resisting Latex #5715

Features: Introducing a new breed of latex paints that has a very high resistance to dirt, dust, smog and mildew. It can be painted even in a rigorous environment where there is a very high concentration of airborne pollutants. DESCRIPTION: Boysen Wallguard is suitable to be used near industrial areas and along highways. It is specially suited for repainting medium and high-rise building where the need to maintain a freshly painted look with less maintenance is of prime importance. Highly Resistant to airborne pollutants and dust

1 of 4

7/8/2010 2:06 PM

Boysen The Number 1 Paint - The Leading Paint Manufacturer - products

http://www.boysen.com.ph/products.do?item_id=642

100% Acrylic Highly alkaline resistant Resist fading, cracking and peeling Good exterior durability Excellent gloss retention Mildew resistant Good block and scrub resistance

PRINCIPAL USES: Use Boysen Wallguard as an exterior finish for newly constructed building as well as repainting old structures. PRACTICAL COVERAGE: 15 - 18 square meter / 4 liters /coat SURFACE DRY: Thirty (30) minutes DRY FILM THICKNESS: 1.5 mils /coat OVERCOATING INTERVAL: Allow one hour before recoating. THINNING: Use as supplied. If necessary, thin with not more than liter of water per 4-liter can APPLICATION: paint brush, roller or airless spray PACKAGING: 4-liter cans AVAILABILITY: Semi-Gloss #5715 COLORANTS: Use only Boysen Latex Colors for tinting to achieve pastel shades. To produce dark shades, use factory mixed colors.

2 of 4

7/8/2010 2:06 PM

Boysen The Number 1 Paint - The Leading Paint Manufacturer - products

http://www.boysen.com.ph/products.do?item_id=642

Instructions
SURFACE PREPARATION: Allow new masonry to dry for 14 to 28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar. Treat with Boysen Masonry Neutralizer #44 diluted at 1:16 ratio with water. Let stand overnight then rough sand surface prior to painting. No need to neutralize in case Boysen Acrytex Primer #1705 is used as primer. PAINTING SCHEDULE: 1st Coat: Boysen Permacoat Flat Latex #701 (100% acrylic, waterbased) or Boysen Acrytex Primer #1705 (solvent-based acrylic, water-tight) Putty: Boysen Acrytex Cast #1711 Texture: Boysen Acrytex Cast #1711 (by mortar gun spray) 2nd & 3rd coat: Boysen Wallguard Dirt Resisting Latex

Choose Color

1:16 Burnt Sienna B-1408

1:16 Burnt Umber B-1409

1:16 Hansa Yellow B-1466

1:16 Lampblack B-1490

3 of 4

7/8/2010 2:06 PM

Boysen The Number 1 Paint - The Leading Paint Manufacturer - products

http://www.boysen.com.ph/products.do?item_id=642

1:16 Raw Sienna B-1406

1:16 Thalo Blue B-1404

1:16 Thalo Green B-1405

1:16 Toluidine Red B-1407

1:16 Venetian Red B-1477

Full Tone Burnt Sienna B-1408

Full Tone Burnt Umber B-1409

Full Tone Hansa Yellow B-1466

Full Tone Lampblack B-1490

Full Tone Raw Sienna B-1406

Full Tone Thalo Blue B-1404

Full Tone Thalo Green B-1405

Full Tone Toluidine Red B-1407

Full Tone Venetian Red B-1477

Paint Calculator

Home |

About Boysen |

News

Facilities

Products

Colors

MSDS

Locate A Dealer

Contact Us

2008 Boysen Paints. All Rights Reserved.

4 of 4

7/8/2010 2:06 PM

Вам также может понравиться