Академический Документы
Профессиональный Документы
Культура Документы
.1 Service Pack 3
2010-09-13
Copyright
2010 SAP AG. All rights reserved.SAP, R/3, SAP NetWeaver, Duet, PartnerEdge, ByDesign, SAP Business ByDesign, and other SAP products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of SAP AG in Germany and other countries. Business Objects and the Business Objects logo, BusinessObjects, Crystal Reports, Crystal Decisions, Web Intelligence, Xcelsius, and other Business Objects products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of Business Objects S.A. in the United States and in other countries. Business Objects is an SAP company.All other product and service names mentioned are the trademarks of their respective companies. Data contained in this document serves informational purposes only. National product specifications may vary.These materials are subject to change without notice. These materials are provided by SAP AG and its affiliated companies ("SAP Group") for informational purposes only, without representation or warranty of any kind, and SAP Group shall not be liable for errors or omissions with respect to the materials. The only warranties for SAP Group products and services are those that are set forth in the express warranty statements accompanying such products and services, if any. Nothing herein should be construed as constituting an additional warranty. 2010-09-13
Contents
Chapter 1
Introduction.............................................................................................................................5 About this document................................................................................................................5 Purpose...................................................................................................................................5 Constraints..............................................................................................................................5 What's new..............................................................................................................................6 Updated Installation framework................................................................................................6 SAP BusinessObjects Explorer XI 3.2......................................................................................6 SAP BusinessObjects Data Services XI 3.2.............................................................................7 Folder Structure.......................................................................................................................7 Planning................................................................................................................................11 SAP BusinessObjects Service Packs.....................................................................................11 Service Pack platform support...............................................................................................13 Service Pack language support..............................................................................................14 Service Pack installation limitations and restrictions...............................................................15 Planning your Service Pack installation...................................................................................16 Downloading Service Packs...................................................................................................17 Installation scenarios............................................................................................................19 Service Pack installation scenarios.........................................................................................19 Updating web application components...................................................................................20 Saving web.xml file modifications...........................................................................................20 Service Pack installation on Windows..................................................................................23 Installing SAP BusinessObjects Edge BI 3.1 Service Pack for server components on Windows................................................................................................................................23 Installing SAP BusinessObjects Edge BI 3.1 Service Pack for client components on Windows.24 Silent installation on Windows................................................................................................25 Performing silent installation using a response file on Windows..............................................25 Silent installation parameters for Windows.............................................................................26 Uninstalling SAP BusinessObjects Edge BI 3.1 Service Packs on Windows...........................30 Uninstalling SAP BusinessObjects Edge BI 3.1 Service Packs on Windows...........................30
2010-09-13
Contents
Chapter 5
Service Pack installation on Linux........................................................................................33 Installing the SAP BusinessObjects Edge BI 3.1 Service Pack on Linux.................................33 Silent installation on Linux......................................................................................................34 Performing a silent installation using a response file on Linux.................................................34 Response file installation parameters for Linux.......................................................................35 Uninstalling SAP BusinessObjects Edge BI 3.1 Service Packs on Linux.................................39 Uninstalling web application components............................................................................41 43
2010-09-13
Introduction
Introduction
1.1.1 Purpose
This document is intended for system administrator's reference, and should be used when updating SAP BusinessObjects Edge BI with the most recent Service Packs.
1.1.2 Constraints
This guide does not describe how to set up a host operating system, supported database, web application server, or web server. If you are planning to use a dedicated database, web application server, or web server, it must be installed and functioning before SAP BusinessObjects Edge BI 3.1 can be installed. For more information on installing or upgrading these components, see SAP BusinessObjects Edge Series 3.1 Installation Guide.
2010-09-13
Introduction
2010-09-13
Introduction
\setup.exe
The Client Installer.zip file contains the installer for the patches and the corresponding folder structure mentinoned in the following table:
2010-09-13
Introduction
Patch
Folder Structure
The SAP Integration.zip file contains the SAP Integration Solutions patch installer. The following table shows the folder structure:
Patch Folder Structure
Note: SAP Integration Solutions patch installer is applicable only if you have the SAP Integration Solutions licensed package. The Other Add-ons/collaterals.zip file contains the installer for the patches and the corresponding folder structure mentioned in the following table:
Patch Folder Structure
EBS Integration Kit Patch installer JDE Integration Kit Patch installer PeopleSoft Integration Kit Patch installer Siebel Integration Kit Patch installer
The Data Services.zip file contains the SAP BusinessObjects Data Services XI 3.2 patch installer. The following table shows the folder structure:
Patch Folder Structure
\DataServices\setup.exe
The Explorer.zip file contains the SAP BusinessObjects Explorer XI 3.2 patch installer. The following table shows the folder structure:
Patch Folder Structure
Explorer installer
\Explorer\setup.exe
The Integration Option for Microsoft SharePoint.zip file contains the Integration Option for Microsoft SharePoint patch installer. The following table shows the folder structure:
2010-09-13
Introduction
Patch
Folder Structure
Integration Option for Microsoft SharePoint installer Integration Option for Microsoft SharePoint Service Pack 3 installer
Linux This section lists the zip files and the folder structure for Linux operating system: The Server.zip file contains the SAP BusinessObjects Edge BI 3.1 Service Pack 3 server patch installer. The following table shows the folder structure:
Patch Folder Structure
\DISK_1\install.sh
The SAP Integration.zip file contains the SAP Integration Solutions patch installer. The following table shows the folder structure:
Patch Folder Structure
Note: SAP Integration Solutions patch installer is applicable only if you have the SAP Integration Solutions licensed package. The Other Add-ons/collaterals.zip file contains the installer for the patches and the corresponding folder structure mentioned in the following table:
Patch Folder Structure
EBS Integration Kit Patch installer JDE Integration Kit Patch installer PeopleSoft Integration Kit Patch installer
The Data Services.zip file contains the SAP BusinessObjects Data Services XI 3.2 patch installer. The following table shows the folder structure:
Patch Folder Structure
\DataServices\DISK_1\install.sh
The Explorer.zip file contains the SAP BusinessObjects Explorer XI 3.2 patch installer. The following table shows the folder structure:
2010-09-13
Introduction
Patch
Folder Structure
Explorer installer
\Explorer\DISK_1\install.sh
10
2010-09-13
Planning
Planning
11
2010-09-13
Planning
Service Pack
Description
Use this Service Pack to update SAP BusinessObjects Edge BI 3.1 installations.
SAP BusinessObjects Edge BI 3.1 Client Tools Use this Service Pack to update SAP BusinessObjects Service Pack 3 Edge BI 3.1 Client Tools installations. Client tools include: Desktop Intelligence Web Intelligence Rich Client Data Source Migration Wizard Report Conversion Tool Import Wizard Query as a Web Service Universe Designer Developer Components SAP BusinessObjects Enterprise Java SDK SAP BusinessObjects Enterprise Web Services SDK Translation Manager
Note: The SAP BusinessObjects Client Tools Service Pack is only available for Windows. SAP BusinessObjects Live Office XI 3.1 Ser- Use this Service Pack to update SAP BusinessObjects vice Pack 3 Live Office XI 3.1 installations. SAP BusinessObjects XI 3.1 Integration for SAP Solutions Service Pack 3 SAP BusinessObjects XI 3.1 Integration for PeopleSoft Enterprise Service Pack 3 SAP BusinessObjects XI 3.1 Integration for Siebel Service Pack 3 Use this Service Pack to update Integration for SAP solutions. Use this Service Pack to update Integration for PeopleSoft Enterprise. Use this Service Pack to update Integration for Siebel.
SAP BusinessObjects XI 3.1 Integration for JD Use this Service Pack to update Integration for JD Edwards EnterpriseOne Service Pack 3 Edwards EnterpriseOne. SAP BusinessObjects XI 3.1 Integration for Oracle E-Business Suite Service Pack 3 Integration option for Microsoft SharePoint software XI 3.1 Service Pack 3 Use this Service Pack to update Integration for Oracle E-Business Suite. Use this Service Pack to update Integration option for Microsoft SharePoint software XI 3.1.
12
2010-09-13
Planning
Service Pack
Description
SAP BusinessObjects BI Widgets XI 3.1 Ser- Use this Service Pack to update BI Widgets XI. vice Pack 3 SAP BusinessObjects Data Services XI 3.2 Service Pack 1 Use this Service Pack to update Data Services.
Sap BusinessObjects Explorer XI 3.2 Service Use this Service Pack to update Explorer. Pack 3
SAP BusinessObjects Live Office XI 3.1 Service Pack 3 SAP BusinessObjects XI 3.1 Integration for SAP Solutions Service Pack 3 SAP BusinessObjects XI 3.1 Integration for PeopleSoft Enterprise Service Pack 3 SAP BusinessObjects XI 3.1 Integration for Siebel Service Pack 3 SAP BusinessObjects XI 3.1 Integration for JD Edwards EnterpriseOne Service Pack 3 SAP BusinessObjects XI 3.1 Integration for Oracle E-Business Suite Service Pack 3 Integration option for Microsoft SharePoint software XI 3.1 Service Pack 3 BI Widgets XI Service Pack 3
13
2010-09-13
Planning
Service Pack
Windows
Linux
SAP BusinessObjects Explorer XI 3.2 Service Pack 3 SAP BusinessObjects Data Services XI 3.2 Service Pack 2 SAP BusinessObjects Data Services XI 3.2 Service Pack 1
If you are installing a Language Pack that was not available during earlier Service Packs, you must ensure that your SAP BusinessObjects Edge BI deployment is at the same level or higher than the
14
2010-09-13
Planning
Language Pack that you are installing. For example, if your deployment is at Service Pack 1.2 and you want to add the Czech Language Pack from Service Pack 1.3, you must either Update your deployment to Service Pack 1.3, which is the same level as the Czech Language Pack, and then install the Czech Language Pack, or Update your deployment to a higher level than the Language Pack, such as Service Pack 2.1, install the Czech Language Pack from Service Pack 1.3, and then apply the Service Pack 2.1 Language Pack update. If you want to install a Language Pack that is at a lower level than the level of your SAP BusinessObjects Edge BI deployment, install the Language Pack and then apply the Language Pack update so that the Language Pack is at the same level as your deployment. For information on installing an additional language pack, see SAP BusinessObjects Edge Series 3.1 Installation Guide for your platform.
15
2010-09-13
Planning
If you uninstall a core product, the Service Packs for that product are not automatically uninstalled. You must manually uninstall the Service Packs. For example, if you uninstall SAP BusinessObjects Edge BI 3.1 Service Pack 3, you must manually uninstall 3.x Service Packs from your system. It is only possible to automatically redeploy SAP BusinessObjects web application components using the Service Pack installation program if you originally deployed the web application components using the SAP BusinessObjects installation program. For more information, see Updating web application components. You cannot install a new language pack when applying a Service Pack. SAP BusinessObjects Service Packs only update languages that were previously installed with your SAP BusinessObjects installation. For information on installing an additional language pack for SAP BusinessObjects products, see the SAP BusinessObjects Edge Series 3.1 Installation Guide.
While installing SAP BusinessObjects Data Services XI 3.2 Service Pack 2 refer to the SAP BusinessObjects Data Services XI 3.2 Service Pack 2 Installation Guide for your platform. While installing SAP BusinessObjects Data Services XI 3.2 Service Pack 1 refer to the SAP BusinessObjects Data Services XI 3.2 Service Pack 1 Installation Guide for your platform.
16
2010-09-13
Planning
17
2010-09-13
Planning
18
2010-09-13
Installation scenarios
Installation scenarios
19
2010-09-13
Installation scenarios
20
2010-09-13
Installation scenarios
If you modified a web.xml file for an SAP BusinessObjects web application and do not want to lose your modification, you must make the modifications in the SAP BusinessObjects Edge BI installation directory. On Windows systems, this directory is <InstallDir>\BusinessObjects Enterprise 12.0\warfiles\WebApps. On Linux systems, this directory is <InstallDir>/bobje/enterprise120/warfiles/WebApps. After you have applied the Service Pack, rebuild the affected .war files and redeploy the .war files to the web application server.
21
2010-09-13
Installation scenarios
22
2010-09-13
You must have Administrator privileges on your Windows system to run an SAP BusinessObjects Service Pack installation. In order to free resources on the system on which you are installing this Service Pack, it is recommended that you use the Central Management Console (CMC) to stop all of the SAP BusinessObjects Edge BI servers on the system before installing the Service Pack, with the following exceptions: Server Intelligence Agent (SIA) Central Management Server (CMS) Input and Output File Repository Servers (FRS) CMS system database These services and servers must be running for the installation to proceed. Note: Before you apply a Service Pack, if you have modified web.xml files for SAP BusinessObjects web applications, see Saving web.xml file modifications. If you are updating a product that contains server components from SAP BusinessObjects Edge BI 3.1, the installation setup program prompts you for information on your deployment's Central Management Server (CMS). This is required to update content that is stored in the CMS database, such as localized strings for server properties.
4.1 Installing SAP BusinessObjects Edge BI 3.1 Service Pack for server components on Windows
This procedure is used to install Service Packs that update SAP BusinessObjects Edge BI server components running on Windows. This includes the following packages: SAP BusinessObjects Edge BI 3.1 SAP BusinessObjects XI 3.1 Integration for SAP Solutions BusinessObjects XI 3.1 Integration for PeopleSoft Enterprise BusinessObjects XI 3.1 Integration for Siebel BusinessObjects XI 3.1 Integration for JD Edwards EnterpriseOne BusinessObjects XI 3.1 Integration for Oracle E-Business Suite Integration Option for Microsoft SharePoint Software XI 3.1 1. Launch the installation by running setup.exe
23
2010-09-13
2. Choose a language for the installation setup program to use during the installation process, and click OK. 3. On the "Welcome" screen, click Next. 4. On the "License Agreement" screen, review the contents of the End User License Agreement, and click Next if you agree to the terms. 5. If the product you are updating includes server components, the "CMS" screen appears. Enter the Hostname, Port Number, and Administrator Password for your deployment's CMS, and click Next. 6. If the product you are updating includes web components that were automatically deployed during your original SAP BusinessObjects installation, the "Automatically Re-Deploy Web Applications?" screen appears. Choose from one of the two options: Yes, automatically re-deploy the web applications. This option redeploys SAP BusinessObjects web application components that were previously deployed. Additional configuration screens specific to the web application server type appears. Provide the required information and click Next. Note: For additional information about specific configuration settings for each web application server, see SAP BusinessObjects Edge Series 3.1 Installation Guide for Windows. No, I will re-deploy the web applications after installation. Select this option if you want to deploy web application server components manually or using the wdeploy tool. For information on manually installing web components or installing using the wdeploy tool, see BusinessObjects XI 3.1 Web Application Deployment Guide for Windows. Note: It is only possible to automatically redeploy web application components to the same web application server type you deployed to during your original SAP BusinessObjects installation. 7. On the "Start Installation" screen, click Next to begin the installation. 8. If you updated SAP BusinessObjects Edge BI, verify that SAP BusinessObjects services are running after the system is restarted. If any services are not running, start them manually using the SAP BusinessObjects Central Management Console (CMC), Central Configuration Manager (CCM), or Windows Services panel. The CMC or CCM can be accessed by clicking Start > Programs > BusinessObjects XI 3.1 > BusinessObjects Edge Series. Note: To review details of the installation, you can view the contents of the installation log file located at <INSTALLDIR>\BusinessObjects Enterprise 12.0\Logging
4.2 Installing SAP BusinessObjects Edge BI 3.1 Service Pack for client components on Windows
24
2010-09-13
The following steps are used to install Service Packs for SAP BusinessObjects client applications. This includes the following packages: SAP BusinessObjects Edge BI 3.1 SAP BusinessObjects XI 3.1 Integration for SAP Solutions BusinessObjects XI 3.1 Integration for PeopleSoft Enterprise BusinessObjects XI 3.1 Integration for Siebel BusinessObjects XI 3.1 Integration for JD Edwards EnterpriseOne BusinessObjects XI 3.1 Integration for Oracle E-Business Suite Integration Option for Microsoft SharePoint Software XI 3.1 SAP BusinessObjects Live Office XI 3.1 SAP BusinessObjects BI Widgets XI 3.1 1. Launch the installation by running setup.exe. 2. In the "Welcome" screen, click Next. 3. In the "License Agreement" screen, review the contents of the End User License Agreement, and click Next to proceed if you agree to the terms. 4. On the "Start Installation" screen, click Next.
where filename.ini is the name you have given to the response file and responsefilepath is the location where you want the file created.
25
2010-09-13
Note: If a file path is not specified, the file is stored in the directory that setup.exe is run from. The installation program must have write permissions on this directory. c. Press Enter to launch the installation setup program. d. Follow the on-screen instructions to enter your preferred installation settings until you reach the Start installation dialog of the setup program. e. Click Cancel to abort the installation setup. All parameters from the installation setup program, both user defined and default, are recorded in the .ini file that is saved to the directory you specified. 2. You can now run a response file installation using the .ini file by issuing setup.exe command with the read option specified (-r):
setup.exe -r <filepath/filename.ini>
where <filepath/filename.ini> is the path to the .ini file you created. Note: You can specify the -l option when running a response file installation to create an installation log file in the specified file path. If a file path is not specified, the log file is created in the directory that setup.exe is run from.
-l <filepath/filename.ini>
26
2010-09-13
Parameter
Description
CLIENTLANGUAGE
Specifies the language used by the installer: CS=Czech DA=Danish DE=German EN=English ES=Spanish FI=Finnish FR=French HU=Hungarian IT=Italian JA=Japanese KO=Korean NB=Norwegian NL=Dutch PL=Polish PT=Portuguese RU=Russian SK=Slovak SV=Swedish TH=Thai ZH_CN=Simplified Chinese ZH_TW=Traditional Chinese Note: If this parameter is not specified, you will be prompted to select a language when the installation setup begins. CLIENTLANGUAGE="EN" SAP BusinessObjects Data Services XI 3.2 Service Pack 1 supports only English language.
/qn
Specifies not to prompt during the installation. Note: You must also enter the CLIENTLANGUAGE parameter as part of your silent install string or the language selection screen will appear at the beginning of your installation.
/qn+
Specifies to prompt when the installation is complete. Note: You must also enter the CLIENTLANGUAGE parameter as part of your silent install string or the language selection screen will appear at the beginning of your installation.
27
2010-09-13
Parameter
Description
AS_ADMIN_IS_SESpecifies that an administrator credential must be passed to access the web apCURE plication server. This setting is only valid for WebSphere 6 and Oracle. AS_ADMIN_IS_SECURE="true" AS_ADMIN_PASSPassword used by the administrator account to access the web application server. WORD AS_ADMIN_PASSWORD="pass" AS_ADMIN_PORT Administration port of the application server. Mandatory for NetWeaver, Oracle Application Server, and WebLogic. For WebSphere, the SOAP port. If not set, the default SOAP port will be used. For Oracle Application Server (oas1013): wdeploy expects the request port of the <notification-server> element in the [opmn.xml] file. AS_ADMIN_USERSpecifies the account name used by the administrator to access the web applicaNAME tion server. AS_ADMIN_USERNAME="admin" AS_DIR Specifies the installation directory for the web application server. AS_DIR="<INSTALLDIR>/Tomcat55" AS_INSTANCE Specifies the name of the current web application server instance. AS_INSTANCE="localhost" AS_SERVER Web application type used in installation. The following options are available: Use tomcat55 for Tomcat Use oas1013 for Oracle Application Server 10g R3 Use weblogic9 for WebLogic 9 Use weblogic10 for WebLogic 10 Use websphere6 for WebSphere 6.1 AS_SERVER="tomcat55" Specifies the name of the Windows service if the application server will be installed as a service on Windows. AS_SERVICE_NAME="BOE120Tomcat"
AS_SERVICENAME
28
2010-09-13
Parameter
Description
AS_VIRTUAL_HOST
AUTODESpecifies if the web application (.war) files are to be automatically deployed by PLOY_WAR_FILES the installation setup program. To have the installation setup program automatically deploy .war files, type AUTODEPLOY_WAR_FILES=1 To deploy .war files manually after the installation setup program runs, type AUTODEPLOY_WAR_FILES=0 CMSPASSWORD Specifies the password for the Administrator account for the Central Management Server (CMS). Only required if a non-blank password was used when the core product was first installed. CMSPASSWORD="myPassword" ENABLELOGFILE Specifies if a log file will be created for the installation. ENABLELOGFILE="1" INSTALLDIR Specifies the directory where you want to install SAP BusinessObjects. INSTALLDIR="C:\Program Files\Business Objects\" NAMESERVER Specifies the name of the CMS NAMESERVER="servername" NSPORT Specifies the port used by the CMS NSPORT="6400"
The following parameters are automatically generated parameters that should not be modified in the .ini file.
29
2010-09-13
Parameter name
30
2010-09-13
Packs appear as a separate entry in the "Add or Remove Programs" screen, and not as a sub-entry of a core product. 2. Select the Service Pack entry in the list of programs and click Remove. 3. The "Add or Remove Programs" dialog box prompts you to confirm that you want to remove the Service Pack from your computer. Click Yes. 4. Wait while the appropriate files are removed and the necessary configuration is carried out. Click Finish. For information about uninstalling SAP BusinessObjects web application components, see Uninstalling web application components.
31
2010-09-13
32
2010-09-13
5.1 Installing the SAP BusinessObjects Edge BI 3.1 Service Pack on Linux
In order to free resources on the system on which you are installing this Service Pack, it is recommended that you use the Central Management Console (CMC) to stop all of the SAP BusinessObjects Edge BI servers on the system before installing the Service Pack, with the following exceptions: Server Intelligence Agent (SIA) Central Management Server (CMS) Input and Output File Repository Servers (FRS) CMS system database These services and servers must be running for the installation to proceed. Note: If you have modified web.xml files for BusinessObjects web applications, see Saving web.xml file modifications before you apply a Service Pack. If you are updating a product that contains server components, the installation setup program prompts you for information on your deployment's Central Management Server (CMS). This is required to update content that is stored in the CMS database, such as localized strings for server properties.
To install the Service Pack, perform the following steps: 1. Launch the installation by running the following command from the Service Pack installation source file location: install.sh<INSTALLDIR> where <INSTALLDIR> is the installation directory of your SAP BusinessObjects product. 2. Review the content of the License agreement and proceed by selecting Y. 3. If the product you are updating includes server components, the "Enter information for existing CMS" screen appears. Enter the Hostname, Port Number, and Administrator Password of your CMS, and press Enter to continue. 4. If the product you are updating includes web components that were automatically deployed during your original SAP BusinessObjects installation, the "Redeploy Web Applications" screen appears. Specify whether or not you want the installation setup program to redeploy the web application components that were previously deployed. Choose from one of two options: Yes.
33
2010-09-13
Additional configuration screens specific to the web application server type appears. Provide the required information and press Enter to continue. Note: For more information about specific configuration settings for each web application server, see the SAP BusinessObjects Edge Series 3.1 Installation Guide for Linux. No. Select this option if you want to deploy web application server components manually or using the wdeploy tool. For more information on manual installation of web components or installation using the wdeploy tool, see the BusinessObjects XI 3.1 Web Application Deployment Guide for Linux. Note: It is only possible to automatically redeploy web components to the same web application server type you deployed during your original SAP BusinessObjects installation. 5. A screen appears that shows the installation directory you have specified. Verify the installation directory and press Enter to start the installation. The progress indicator displays the status of the installation. 6. Press Enter to complete the installation. Note: The Service Pack installer creates a backup of modified files in <INSTALLDIR>/setup/backup. It is recommended that you do not modify or remove these files. To review details of the installation, you can view the contents of the installation log file located at <INSTALLDIR>/setup/logs/
34
2010-09-13
The following steps describe how to create a response file using the SAP BusinessObjects installation program. Once you have created the response file, you can run a silent installation by running the ./install.sh command and specifying the path to the response file. 1. Create a response file. a. From the Service Pack installation source file location, run the .install.sh command with the write option (-WRITERESPONSEPATH) specified:
./install.sh <INSTALLDIR> -WRITERESPONSEPATH <response_file_path>
where <INSTALLDIR> is the SAP BusinessObjects installation directory and <re sponse_file_path> is the path and file name for the response file you are creating. b. Press Enter to launch the installation setup program. c. Follow the on-screen instructions to enter your preferred installation settings until you reach the Start installation screen of the setup program. The settings are recorded in the response file. d. Press [Ctrl -X] to abort the installation setup. The parameters from the installation setup program, both user defined and default, are recorded in the response file which is saved to the directory you specified. 2. You can now run a response file installation by executing ./install.sh command with the -READRESPONSEPATH option specified:
./install.sh <INSTALLDIR> -READRESPONSEPATH <response_file_path>
35
2010-09-13
Parameter
Description
CDDIR
Path to the DISK_1 directory on the distribution CD or directory location for your Service Pack installation files. This path defaults to the CD directory. CDDIR="<CD>/BusinessObjects/DISK_1"
CLIENTLANGUAGE
The language setting used for the installation program. chs=Simplified Chinese cht=Traditional Chinese cs=Czech da=Danish de=German en=English es=Spanish fi=Finnish fr=French hu=hungarian it=Italian jp=Japanese ko=Korean nb=Norwegian nl=Dutch pl=Polish pt=Portuguese ru=Russian sk=slovak sv=Swedish th=Thai CLIENTLANGUAGE="en" Note: SAP BusinessObjects Data Services XI 3.2 Service Pack 1 supports only English language.
INSTALLMODE
Specifies a comma-delimited list for the SAP BusinessObjects Edge BI installer operating modes. This parameter supports the following options: interactive, install silent, install INSTALLMODE=silent,install
REDEPLOYWEBAPPS
36
2010-09-13
Parameter
Description
Specifies whether the installation program automatically deploys the web applications. REDEPLOYWEBAPPS=true AS_DIR Specifies the path of the application server directory if the server is being installed. The path is automatically set using the installation directory. AS_DIR=<INSTALLDIR>/bobje/tomcat/ AS_SERVER Specifies the name of the application server being installed. Use tomcat55 for Tomcat Use oas1013 for Oracle Application Server 10g R3 Use weblogic9 for WebLogic 9 Use weblogic10 for WebLogic 10 Use websphere6 for WebSphere 6.1 AS_SERVER=tomcat55 AS_INSTANCE Specifies the name of the current web application server instance. AS_INSTANCE="localhost" AS_VIRTUAL_HOST Specifies virtual host to which the application must be bound. AS_VIRTUAL_HOST="hostname" AS_ADMIN_PORT Administration port of the application server. Mandatory for NetWeaver, Oracle Application Server, and WebLogic. For WebSphere, the SOAP port. If not set, the default SOAP port will be used. For Oracle Application Server (oas1013): wdeploy expects the request port of the <notification-server> element in the [opmn.xml] file. AS_ADMIN_USERSpecifies the account name used by the NAME administrator to access the web application server. AS_ADMIN_USERNAME="admin" AS_ADMIN_PASSPassword used by the administrator account to access the web application server. WORD AS_ADMIN_PASSWORD="pass"
37
2010-09-13
Parameter
Description
AS_ADMIN_IS_SESpecifies if administrator credential must be passed to access the web application CURE server. This setting is only valid for WebSphere 6 and Oracle. AS_ADMIN_IS_SECURE="true" CMSNAMESERVSpecifies the name of the CMS ER CMSNAMESERVER="servername" CMSPORTNUMBER Specifies the port used by the CMS CMSPORTNUMBER="6400" CMSPASSWORD Specifies the password for the Administrator account for the Central Management Server (CMS). Only required if a non-blank password was used when the core product was first installed. CMSPASSWORD="myPassword" ENABLEMP Specifies which specific products to manually enable. Each product must be separated by a comma. For a custom installation this setting is used to enable those products typically not installed in a new installation. ENABLEMP=BusinessObjects.WebTier Components, DISABLEMP Specifies which specific products to manually disable. Each product must be separated by a comma. For a custom installation this setting is used to disable those products typically not installed in a new installation. DISABLEMP=BusinessObjects.WebTierComponents,
The following parameters are automatically generated parameters that should not be modified in the response file.
Parameter name
38
2010-09-13
Parameter name
The "Add or Remove Programs" screen appears. 2. Select the SAP BusinessObjects Edge BI Service Pack you want to remove and press Enter. 3. Select Uninstall Product and press Enter. A confirmation screen is displayed. 4. Select Yes and press Enter. The uninstall process begins. For more information about uninstalling SAP BusinessObjects web application components, see Uninstalling web application components
39
2010-09-13
40
2010-09-13
If you are uninstalling SAP BusinessObjects web application components from a Windows system, the previous versions of the web applications are not automatically redeployed. You must either redeploy the web applications manually or by using wdeploy. If you are uninstalling SAP BusinessObjects web application components from a Linux system, the previous versions of the web applications are only automatically redeployed if the .war files were automatically deployed when the previous version was installed. For more information on redeploying .war files, see the Deploying with wdeploy chapter in Web Application Deployment Guide for your platform, available at http://help.sap.com
41
2010-09-13
42
2010-09-13
Index
D
Data Services 3.2 7
U S
Silent installation, on Linux 34 on Windows 25 parameters for Linux 35 parameters for Windows 26 Uninstalling, SAP BusinessObjects Edge BI 3.1 Service Pack on Linux 39 SAP BusinessObjects Edge BI 3.1Service Pack on Windows 30 web application components 41
E
Explorer 3.2 6
I
Installation scenarios 19
W
web.xml 20
43
2010-09-13
Index
44
2010-09-13