Академический Документы
Профессиональный Документы
Культура Документы
Fully-threaded screw
The solution par excellence for new constructions and modernisation of existing buildings.
Invoicing Organisation Logistics
Fully-threaded screw
Unique in every KONSTRUX is unique. Professionals go for Today, the highest priority is given to efficiency aspect: the expertise of the system pioneer: greater in all production work and on all building sites. high-tech for high breaking strength, lower screwing torque, At the same time, other decisive criteria such loads and low expen- exacter and simpler calculating. as the statics, the requirements for fire diture of force. protection and heat insulation and, in wood construction in particular, the aesthetics, must Through the application of a high-tech not be pushed into the background. manufacturing process, the carrying capacity If you want to make practically every wood to of KONSTRUX fully-threaded screws far exceeds that wood connection with just one system, if you want of traditional screws. The connectors are not passivated to comply without problems with every standard in the usual way with hexavalent chromium to minimise and also want to save time, space and costs, hydrogen brittleness and thus the risk of fracture. there is only one solution: KONSTRUX. At the same time the surface brings about a reduction of the screwing torque and in this way facilitates processing decisively. The online measuring tool enables the user to calculate the dimensions and number of required connectors exactly. In this way, standardised safe working is achieved without overdimensioning pushing up costs.
There are x problems in wood construction and just one solution: KONSTRUX.
Here you can see what nobody can see later on: endless possibilities, invisible connection .
Beam connection: you place KONSTRUX connectors from the point that has the best access. Secondary beam connection: Butt-jointed beams are connected without drilling in a single working step. Practically invisible with KONSTRUX.
Initiating compressive forces and double battens: Wood can be subjected to finite loads only. Excessive compressive forces can cause deformations. KONSTRUX connectors distribute the compressive force over the whole of the cross-section. With double battens making a board stack the connectors eliminate deflection almost completely.
E.u.r.o.Tec GmbH Unter dem Hofe 5 D-58099 Hagen Tel. 0049 (0)2331 62 45-0 Fax 0049/2331 62 45-200 e-mail: info@e-u-r-o-tec.de www.e-u-r-o-tec.de
Fully-threaded screw
A system worthy of the name. For connections with which you earn more.
Systematic, safe, The KONSTRUX system: fast and Surface-coated KONSTRUX fully-threaded economical. screws, the immediately understandable calculation tables and the online calculations tool. With the KONSTRUX system all woodworkers are able after just a brief period of familiarisation to make wood connections at high speed that are superior to practically all traditional connections with regard to carrying force. Low material expense and simple processing create leeway at last in costing.
KONSTRUX at a glance: 1. One system for all connections in wood element construction, prefabricated house construction, hall construction, carpentry 2. No drilling, just screws. 3. Simple online calculations and understandable tables. 4. Highest load transmission. 5. Invisible connections, higher fire resistance, no thermal bridges. 6. High-tech for high safety and low costs. 7. Professional hotline for complex solutions.
Make new from old, the combination of old wooden beams and new wood reinforcement.
The KONSTRUX system also provides a
Existing buildings can good overview of costs with easily be modernised calculatable applications for without problems with modernising work. Modernisation KONSTRUX. expenses are no longer subject to overdimensioning pushing up costs.
No ifs or buts!
KONSTRU X: means low-cost working. KONSTRU X: just one system for all wood-wood connections. KONSTRU X: static calculations with the online calculating tool. KONSTRU X: ideal solution for modernising old buildings as well. KONSTRU X: complying with static standards is not a problem. KONSTRU X: greater carrying capacity in comparison with traditional screws. KONSTRU X: no more overdimensioning pushing up costs.
Fully-threaded screw
E.u.r.o.Tec GmbH Unter dem Hofe 5 D-58099 Hagen Tel. 0049 (0)2331 62 45-0 Fax 0049/2331 62 45-200 e-mail: info@e-u-r-o-tec.de www.e-u-r-o-tec.de
Fully-threaded screw
Rafter/purlin connectors KONSTRUX connectors have a great advantage in comparison with traditional connectors. Shortened installation times and greater load-bearing capacity are just two examples. The head pull-through no longer has to be taken into account with KONSTRUX screws, but this still has to be done with traditional screws.
Dovetail joints This type of connection is used typically in timber work, e.g. secondary beam/main beam, joint beam/rafter, etc. KONSTRUX screws give these connections greater carrying capacity and thus ensure for even more security with regard to stability.
Element construction/ house building One advantage of the KONSTRUX screw is the full thread; this enables significantly higher load values to be achieved with regard to tension, pressure and shearing. Time and again screwing screws into the sub-construction leads to splintering or cracking caused by the short distance to the edge. With KONSTRUX screws this problem is solved by means of a drill point suitable for this.
E.u.r.o.Tec GmbH Unter dem Hofe 5 D-58099 Hagen Tel. 0049 (0)2331 62 45-0 Fax 0049/2331 62 45-200 e-mail: info@e-u-r-o-tec.de www.e-u-r-o-tec.de
Fully-threaded screw
Notches / openings Glued connections, for example, can fail because of environmental influences; the KONSTRUX screw makes a quick and secure connection here. The load values are increased here as well.
Composite trusses / battens Wood parts can be reinforced or battened with KONSTRUX screws without much effort for modernising existing buildings. The improved carrying capacity of this application increases the safety / statics of every old building.
E.u.r.o.Tec GmbH Unter dem Hofe 5 D-58099 Hagen Tel. 0049 (0)2331 62 45-0 Fax 0049/2331 62 45-200 e-mail: info@e-u-r-o-tec.de www.e-u-r-o-tec.de
Fully-threaded screw
KonstruX
Dimensions mm d1 L dk
OD
Mounted part
BIC
Built-in part
Thread load
Screwing angle 90
OD
Mounted part
BIC
Built-in part
Thread load
Screwing angle 90
hmin mm
Lg1/2 mm
hmin mm
Lg mm
6,3 x 120 6,3 x 140 6,3 x 160 6,3 x 195 8,0 x 155 8,0 x 195 8,0 x 220 8,0 x 245 8,0 x 295 8,0 x 330 10,0 x 300 10,0 x 330 10,0 x 360 10,0 x 400 10,0 x 450 10,0 x 500 10,0 x 550 10,0 x 600
8 8 8 8 10 10 10 10 10 10 13 13 13 13 13 13 13 13
65 75 85 100 80 100 115 125 150 170 155 170 185 205 230 255 280 305
60 70 80 98 78 98 110 123 148 165 150 165 180 200 225 250 275 300
1,89 2,21 2,52 3,07 3,10 3,90 4,40 4,90 5,90 6,60 7,50 8,25 9,00 10,00 11,25 12,50 13,75 15,00
4,37 5,09 5,82 7,10 7,16 9,01 10,17 11,32 13,63 15,25 17,33 19,06 20,79 23,10 25,99 28,88 31,77 34,66
125 145 165 200 160 200 225 250 300 335 305 335 365 405 455 505 555 605
120 140 160 195 155 195 220 245 295 330 300 330 360 400 450 500 550 600
3,78 4,41 5,04 6,14 6,20 7,80 8,80 9,80 11,80 13,20 15,00 16,50 18,00 20,00 22,50 25,00 27,50 30,00
8,73 10,19 11,64 14,19 14,32 18,02 20,33 22,64 27,26 30,50 34,66 38,12 41,59 46,21 51,98 57,76 63,54 69,31
Permissible values in accordance with DIN 1052 : 1988 04 Rax,k characteristic values in accordance with ENV 1995-1:1:1994-06 or DIN 1052 : 2004 08 calculated for bulk density wood pk 380 kg/m
With large wood dimensions the screw connectors are countersunk steplessly into the wood. Observe the thread half
A deection resistant steel plate is used to distribute the load Take account of rated value on collapsing
Attention:
the values shown are planning aids; only authorised persons may calculate projects.
E.u.r.o.Tec GmbH Unter dem Hofe 5 D-58099 Hagen Tel. 0049 (0)2331 62 45-0 Fax 0049/2331 62 45-200 e-mail: info@e-u-r-o-tec.de www.e-u-r-o-tec.de
OD
Mounted part
BIC
Built-in part
Thread load
Screwing angle 90
OD
Mounted part
BIC
Built-in part
Axial load
Screwing angle 45
hmin mm
Lg1/2 mm
hmin mm
Lg mm
6,3 x 120 6,3 x 140 6,3 x 160 6,3 x 195 8,0 x 155 8,0 x 195 8,0 x 220 8,0 x 245 8,0 x 295 8,0 x 330 10,0 x 300 10,0 x 330 10,0 x 360 10,0 x 400 10,0 x 450 10,0 x 500 10,0 x 550 10,0 x 600
8 8 8 8 10 10 10 10 10 10 13 13 13 13 13 13 13 13
65 75 85 100 80 100 115 125 150 170 155 170 185 205 230 255 280 305
60 70 80 98 78 98 110 123 148 165 150 165 180 200 225 250 275 300
0,67 0,67 0,67 0,67 1,09 1,09 1,09 1,09 1,09 1,09 1,70 1,70 1,70 1,70 1,70 1,70 1,70 1,70
12,80 12,80 12,80 12,80 25,00 25,00 25,00 25,00 25,00 25,00 39,10 39,10 39,10 39,10 39,10 39,10 39,10 39,10
45 50 60 70 60 70 80 90 105 120 110 120 130 145 160 180 195 215
60 70 80 98 78 98 110 123 148 165 150 165 180 200 225 250 275 300
1,65 1,92 2,19 2,67 2,70 3,39 3,83 4,27 5,14 5,75 6,53 7,18 7,83 8,70 9,79 10,88 11,97 13,06
3,74 4,37 4,99 6,08 6,14 7,72 8,71 9,70 11,68 13,07 14,85 16,34 17,82 19,80 22,28 24,75 27,23 29,71
Permissible values in accordance with DIN 1052 : 1988 04 Rax,k characteristic values in accordance with ENV 1995-1:1:1994-06 or DIN 1052 : 2004 08 calculated for bulk density wood pk 380 kg/m
With large wood dimensions the screw connectors are countersunk steplessly into the wood. Observe the thread half
It is permitted to screw in screw connectors from the top and the bottom
Vzule recommended permissible load Vzule = Rax.k x kmod 0.8 : ym 1.3:1.4 1.4 av. reduction factor
Attention:
the values shown are planning aids; only authorised persons may calculate projects.
E.u.r.o.Tec GmbH Unter dem Hofe 5 D-58099 Hagen Tel. 0049 (0)2331 62 45-0 Fax 0049/2331 62 45-200 e-mail: info@e-u-r-o-tec.de www.e-u-r-o-tec.de
Fully-threaded screw
SB
Height
MB
Height
SB
Width
MB
Width
Installation dimension
Screwing angle 45
Carrying force
in accordance with approval
min. hSB mm
min. hMB mm
min. bSB mm
min. bMB mm
m mm
Angle
6,3 6,3 6,3 6,3 6,3 6,3 6,3 6,3 6,3 6,3 6,3 6,3 6,3 6,3 6,3 6,3
x 120 x 120 x 120 x 120 x 140 x 140 x 140 x 140 x 160 x 160 x 160 x 160 x 195 x 195 x 195 x 195
8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
90 90 90 90 100 100 100 100 120 120 120 120 140 140 140 140
90 90 90 90 100 100 100 100 120 120 120 120 140 140 140 140
45 45 45 45 50 50 50 50 60 60 60 60 70 70 70 70
45 45 45 45 50 50 50 50 60 60 60 60 70 70 70 70
45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45
2,33 4,65 6,98 9,31 2,71 5,43 8,14 10,86 3,10 6,20 9,31 12,41 3,78 7,56 11,34 15,12
5,29 10,59 15,88 21,17 6,18 12,35 18,53 24,70 7,06 14,12 21,17 28,23 8,60 17,20 25,80 34,41
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
R,Vk resistance characteristic value in accordance with ENV 1995-1:1:1994-06 or DIN 1052 : 2004 08 Wood construction calendar 2004 ISBN 978-3-871104-136-5 calculated for wood bulk density pk 380 kg/m
It is permitted to screw in screw connectors from the top and the bottom (visible side)
Screw the screw connectors into the SB so that the screwing depths in the SB and MB are the same
Vzule recommended permissible load Vzule = RV.k x kmod 0.8 : ym 1.3:1.4 Factor 1.4 av. load safety factor Main beam bearing clamped Edge and centre distance Screw connector XT 8
Attention:
the values shown are planning aids; only authorised persons may calculate projects.
RV mm 25
AV mm 15
E.u.r.o.Tec GmbH Unter dem Hofe 5 D-58099 Hagen Tel. 0049 (0)2331 62 45-0 Fax 0049/2331 62 45-200 e-mail: info@e-u-r-o-tec.de www.e-u-r-o-tec.de
SB
Height
MB
Height
SB
Width
MB
Width
Installation dimension
Screwing angle 45
Carrying force
in accordance with approval
min. hSB mm
min. hMB mm
min. bSB mm
min. bMB mm
m mm
Angle
8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0
x x x x x x x x x x x x x x x x x x x x x x x x
155 155 155 155 195 195 195 195 220 220 220 220 245 245 245 245 295 295 295 295 330 330 330 330
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
120 120 120 120 140 140 140 140 160 160 160 160 180 180 180 180 220 220 220 220 240 240 240 240
120 120 120 120 140 140 140 140 160 160 160 160 180 180 180 180 220 220 220 220 240 240 240 240
80 120 160 200 80 120 160 200 80 120 160 200 80 120 160 200 80 120 160 200 80 120 160 200
45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45
3,82 7,63 11,45 15,26 4,80 9,60 14,40 19,20 5,42 10,83 16,25 21,67 6,03 12,06 18,10 24,13 7,26 14,53 21,79 29,05 8,12 16,25 24,37 32,50
8,68 17,36 26,05 34,73 10,92 21,84 32,77 43,69 12,32 24,65 36,97 49,29 13,72 27,45 41,17 54,89 16,52 33,05 49,57 66,09 18,48 36,97 55,45 73,94
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
R,Vk resistance characteristic value in accordance with ENV 1995-1:1:1994-06 or DIN 1052 : 2004 08 Wood construction calendar 2004 ISBN 978-3-871104-136-5 calculated for wood bulk density pk 380 kg/m
It is permitted to screw in screw connectors from the top and the bottom (visible side)
Screw the screw connectors into the SB so that the screwing depths in the SB and MB are the same
Vzule recommended permissible load Vzule = RV.k x kmod 0.8 : ym 1.3:1.4 Factor 1.4 av. load safety factor Main beam bearing clamped Edge and centre distance Screw connector XT 8 RV mm 30 AV mm 20
Attention:
the values shown are planning aids; only authorised persons may calculate projects.
E.u.r.o.Tec GmbH Unter dem Hofe 5 D-58099 Hagen Tel. 0049 (0)2331 62 45-0 Fax 0049/2331 62 45-200 e-mail: info@e-u-r-o-tec.de www.e-u-r-o-tec.de
Fully-threaded screw
SB
Height
MB
Height
SB
Width
MB
Width
Installation dimension
Screwing angle 45
Carrying force
in accordance with approval
min. hSB mm
min. hMB mm
min. bSB mm
min. bMB mm
m mm
Angle
10,0 x 300 10,0 x 300 10,0 x 300 10,0 x 330 10,0 x 330 10,0 x 330 10,0 x 360 10,0 x 360 10,0 x 360 10,0 x 400 10,0 x 400 10,0 x 400 10,0 x 450 10,0 x 450 10,0 x 450 10,0 x 500 10,0 x 500 10,0 x 500 10,0 x 550 10,0 x 550 10,0 x 550 10,0 x 600 10,0 x 600 10,0 x 600
13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13
220 220 220 240 240 240 260 260 260 290 290 290 320 320 320 360 360 360 400 400 400 430 430 430
220 220 220 240 240 240 260 260 260 290 290 290 320 320 320 360 360 360 400 400 400 430 430 430
105 155 205 105 155 205 105 155 205 105 155 205 105 155 205 105 155 205 105 155 205 105 155 205
110 110 110 120 120 120 130 130 130 145 145 145 160 160 160 180 180 180 200 200 200 215 215 215
110 110 110 120 120 120 130 130 130 145 145 145 160 160 160 180 180 180 200 200 200 215 215 215
45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45
9,23 18,47 27,70 10,16 20,31 30,47 11,08 22,16 33,24 12,31 24,62 36,93 13,85 27,70 41,55 15,39 30,78 46,16 16,93 33,85 50,78 18,47 36,93 55,40
21,00 42,01 63,01 23,11 46,21 69,32 25,21 50,41 75,62 28,01 56,01 84,02 31,51 63,01 94,52 35,01 70,02 105,02 38,51 77,02 115,53 42,01 84,02 126,03
1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3
R,Vk resistance characteristic value in accordance with ENV 1995-1:1:1994-06 or DIN 1052 : 2004 08 Wood construction calendar 2004 ISBN 978-3-871104-136-5 calculated for wood bulk density pk 380 kg/m
It is permitted to screw in screw connectors from the top and the bottom (visible side)
Screw the screw connectors into the SB so that the screwing depths in the SB and MB are the same
Vzule recommended permissible load Vzule = RV.k x kmod 0.8 : ym 1.3:1.4 Factor 1.4 av. load safety factor Main beam bearing clamped Edge and centre distance Screw connector XT 8
Attention:
the values shown are planning aids; only authorised persons may calculate projects.
RV mm 40
AV mm 25
E.u.r.o.Tec GmbH Unter dem Hofe 5 D-58099 Hagen Tel. 0049 (0)2331 62 45-0 Fax 0049/2331 62 45-200 e-mail: info@e-u-r-o-tec.de www.e-u-r-o-tec.de
10
Fully-threaded screw
Eurotec GmbH sales cartons
6,3 mm
a u f s i c h t li c au Zulassungserweiterung
Drive TX 30 TX 30 TX 30 TX 30
beantragt
8,0 mm
10,0 mm
a u f s i c h t li c au Zulassungserweiterung
beantragt
You will find further information under: www.e-u-r-o-tec.de, or just call us: 02331 62450
E.u.r.o.Tec GmbH Unter dem Hofe 5 D-58099 Hagen Tel. 0049 (0)2331 62 45-0 Fax 0049/2331 62 45-200 e-mail: info@e-u-r-o-tec.de www.e-u-r-o-tec.de
11
Invoicing
Organisation
Logistics
Calculation program
Stand 05/2008 / GB Fr den Inhalt sind Irrtmer einschlielich technischer nderungen und Ergnzungen vorbehalten. Nachdruck, (auch auszugsweise) ist nur mit Genehmigung der E.u.r.o.Tec GmbH gestattet. Konzept u. Gestaltung: cd-protype, D-58239 Schwerte, Tel: 0049 (0)2304 / 890113
E.u.r.o.Tec GmbH Unter dem Hofe 5 D-58099 Hagen Tel.: 0049 (0)2331 62 45-0 Fax: 0049 (0)2331 62 45-200 email: info@e-u-r-o-tec.de www.e-u-r-o-tec.de