Академический Документы
Профессиональный Документы
Культура Документы
Data Sheet
Description This 7.62 mm (0.3 inch) LED seven-segment display uses industry standard size package and pinout. The device is available in either common anode or common cathode. The choice of colors includes High Efficiency Red (HER), Green, AlGaAs Red, and Yellow. The gray face displays are suitable for indoor use.
Features Industry standard size Industry standard pinout 7.62 mm (0.4 inch) character height DIP lead on 2.54 mm Choice of colors High Efficiency Red (HER), Green, AlGaAs Red, and Yellow Excellent appearance Evenly lighted segments gray package gives optimum contrast 50 viewing angle Design flexibility Common anode or common cathode Single digit Left and right hand decimal point Categorized for luminous intensity Green and yellow categorized for color
Applications Suitable for indoor use Not recommended for industrial application, i.e., operating temperature requirements exceeding +85C or below 25C[1] Extreme temperature cycling not recommended
Note: 1. For additional details, please contact your local Avago sales office or an authorized distributor.
Devices HER HDSP-331E HDSP-332E HDSP-333E HDSP-334E HDSP-333G HDSP-334G HDSP-333A HDSP-334A HDSP-333Y HDSP-334Y Green HDSP-331G AlGaAs Red HDSP-331A Yellow HDSP-331Y Description Common Anode, Right Hand and Left Hand Decimal Common Anode, Right Hand and Left Hand Decimal without Pin 4, 5 and 12 Common Cathode, Right Hand Decimal Common Cathode, Right Hand Decimal Package Drawing A A B C
Notes: 1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Avago representative for details. 2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.
FRONT VIEW
TOP END VIEW COUNTRY OF ORIGIN 10 COLOR BINNING (NOTE 3) 0.50 (0.020)
PIN 1 +
19.00 (0.748)
1.00 (0.039)
7.62 (10.300)
2.54 x 6 (0.099)
SIDE VIEW 10.10 (0.398) F E L.DP 0.30 (0.012) 3.88 (0.153) D A G B C R.DP
7.62 (0.300)
FRONT VIEW
TOP END VIEW COUNTRY OF ORIGIN 10 COLOR BINNING (NOTE 3) 0.50 (0.020)
PIN 1 +
19.00 (0.748)
1.00 (0.039)
7.62 (10.300)
2.54 x 6 (0.099)
7.62 (0.300)
FRONT VIEW
TOP END VIEW COUNTRY OF ORIGIN 10 COLOR BINNING (NOTE 3) 0.50 (0.020)
PIN 1 +
19.00 (0.748)
1.00 (0.039)
7.62 (10.300)
2.54 x 6 (0.099)
7.62 (0.300)
HDSP-331E/331G/331Y/331A/332E 3.14 COM PIN N0. 1 2 3 6 7 8 L.DP 6 A 1 B 13 C 10 D 8 E 7 F 2 G R.DP 11 9 9 10 11 13 14 CONNECTION CATHODE A CATHODE F COMMON ANODE CATHODE L.DP CATHODE E CATHODE D CATHODE R.DP CATHODE C CATHODE G CATHODE B COMMON ANODE
Common Cathode
HDSP-333E/333G/333Y/333A 4.12 COM PIN NO. 1 2 4 6 7 8 A 14 B 13 C 8 D 7 E 6 F 1 G 2 DP 9 9 12 13 14 CONNECTION ANODE F ANODE G COMMON CATHODE ANODE E ANODE D ANODE C ANODE DP COMMON CATHODE ANODE B ANODE A PINS 3, 5, 10, 11: NC
HDSP-334E/334G/334Y/334A 1.6 COM PIN NO. 1 2 3 4 5 6 A 10 B 9 C 8 D 5 E 2 F 4 G 3 DP 7 7 8 9 10 CONNECTION COMMON CATHODE ANODE E ANODE G ANODE F ANODE D COMMON CATHODE ANODE DP ANODE C ANODE B ANODE A PINS 11, 12, 13, 14: NC
Absolute Maximum Ratings at TA = 25C Description Power Dissipation Segment Forward Current Segment Peak Forward Current per Segment (1/10 Duty Factor at 10 kHz) Operating Temperature Range Storage Temperature Range Reverse Voltage per Segment or DP Wave Soldering Temperature for 3 Seconds (at 2 mm Distance from the Body)
Notes: 1. Derate above 25C at 0.33 mA/C. 2. Derate above 25C at 0.33 mA/C. 3. Derate above 25C at 0.2 mA/C. 4. Derate above 25C at 0.27 mA/C.
Units mW mA mA C C V C
Electrical/Optical Characteristics at TA = 25C High Efficiency Red (HER) Devices HDSPParameter Luminous Intensity/Segment Forward Voltage Peak Wavelength Dominant Wavelength Reverse Voltage Symbol IV VF PEAK d VR Min. 0.8 Typ. 1.15 1.80 2.05 635 620 Max. Units mcd mcd V nm nm V Test Conditions IF = 5 mA IF = 10 mA IF = 20 mA
2.40
IR = 100 A
Green Devices HDSPParameter Luminous Intensity/Segment Forward Voltage Peak Wavelength Dominant Wavelength Reverse Voltage Symbol IV VF PEAK d VR Min. 0.8 1.80 Typ. 2.00 2.07 2.25 568 573 Max. Units mcd V V nm nm V Test Conditions IF = 10 mA IF = 10 mA IF = 20 mA
2.60
IR = 100 A
AlGaAs Red Devices HDSPParameter Luminous Intensity/Segment Forward Voltage Peak Wavelength Dominant Wavelength Reverse Voltage Symbol IV VF PEAK d VR Min. 2.001 331A 333A 334A Typ. 3.93 4.20 1.85 660 643 Max. Units mcd mcd V nm nm V Test Conditions IF = 5 mA IF = 10 mA IF = 20 mA
2.00
IR = 100 A
Yellow Devices HDSPParameter Luminous Intensity/Segment Forward Voltage Peak Wavelength Dominant Wavelength Reverse Voltage Symbol IV VF PEAK d VR Min. 0.80 331Y 333Y 334Y Typ. 0.71 1.50 2.15 595 590 5 Max. Units mcd mcd V nm nm V Test Conditions IF = 5 mA IF = 10 mA IF = 20 mA
2.60
IR = 100 A
Intensity Bin Limits (mcd at 10 mA) Bin Name G H I J K HER/Green/Yellow Min.[1] Max.[1] 0.801 1.250 1.251 2.000 2.001 3.200 NA NA NA NA AlGaAs Red Min.[1] NA NA 2.001 3.201 5.051 Max.[1] NA NA 3.200 5.050 8.000
Color Bin Limits (nm at 10 mA) Color Green Bin 3 4 5 1 2 3 Dominant Wavelength (nm) Min.[1] Max.[1] 569.1 571.0 571.1 573.0 573.1 575.0 585.5 588.5 588.5 591.5 591.5 594.5
Yellow
120 100 80 60 40 20 0
20
40
60
80
100
0.5
1.0
1.5
2.0
2.5
3.0
3.5
TA AMBIENT TEMPERATURE C
VF FORWARD VOLTAGE V
2.5
RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10 mA)
1.4
RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA)
2.0
1.5
1.0
0.5
10
15
20
25
30
35
Figure 4. Relative efficiency (luminous intensity per unit current) vs. peak current.
10
Green
30 GAP GREEN 25 20 15 10 5 0
120 100 80 60 40 20 0
20
40
60
80
100
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 VF FORWARD VOLTAGE V
TA AMBIENT TEMPERATURE C
3.0
RELATIVE LUMINOUS INTENSITY (NORMALIZEDTO 1 AT 10 mA)
RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA)
10
15
20
25
30
35
Figure 8. Relative efficiency (luminous intensity per unit current) vs. peak current.
11
AlGaAs Red
120 100 80 60 40 20 0
0.5
1.0
1.5
2.0
2.5
TA AMBIENT TEMPERATURE C
VF FORWARD VOLTAGE V
3.0
RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10 mA)
1.2
10
15
20
25
30
35
Figure 12. Relative efficiency (luminous intensity per unit current) vs. peak current.
12
Yellow
25 YELLOW 20
120 100 80 60 40 20 0
15
10
20
40
60
80
100
0.5
1.0
1.5
2.0
2.5
3.0
3.5
TA AMBIENT TEMPERATURE C
VF FORWARD VOLTAGE V
3.5
RELATIVE LUMINOUS INTENSITY (NORMALIZEDTO 1 AT 10 mA)
RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA)
1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 IPEAK PEAK FORWARD CURRENT PER SEGMENT mA
3.0 2.5 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 35 IF FORWARD CURRENT FOR SEGMENT mA
Figure 16. Relative efficiency (luminous intensity per unit current) vs. peak current.
13
For product information and a complete list of distributors, please go to our website:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright 2006 Avago Technologies Limited. All rights reserved. Obsoletes 5988-2971EN 5988-9421EN November 3, 2006