Академический Документы
Профессиональный Документы
Культура Документы
www.wilsontool.ro
Distribuitor:
Tel: 0040-331-401599 Tel/Fax: 0040-231-515702 Tel Mob: 0040-745-528494 E-mail: info@sm-tech.ro www.sm-tech.ro www.wilsontool.ro
V stm la dispoziie cu plcere cu orice informaie sau ofert pentru scule Wilson Tool destinate mainii d-voastr de tantat CNC
TM
Nitrex high endurance surface enhancement, exclusively from Wilson Tool, increases press brake tooling life by several times that of standard tooling. With a surface hardness of HRC-60 and a consistent 0.51mm of penetration below the surface of the tool, Nitrex adds lubricity to press brake tooling and lowers the coefficient of friction as the material slides over the shoulder of the V-opening on a die. Any Wilson Tool press brake punch or die can be enhanced with Nitrex.
Most Wilson Tool press brake dies now come with NITREX as standard at no extra cost.
SAVE TIME AND MONEY WITH THE TM WILSON EXPRESS CLAMPING SYSTEM.
Available for virtually any make and model of press brake, the Wilson Express Clamping System is uniquely designed to increase your productivity and reduce your operating costs.
Order Credit
Minimum order is 35.00. All orders are subject to the approval of our credit department. If you are a new account, please furnish us with a bank reference and three supplier references. A credit limit will be imposed on new accounts until credit has been established. Terms are net 30 days.
Payment
Returned Material
A handling charge of 25% is made on all standard parts returned for credit. Written permission and shipping instructions must be obtained before the return of any material. Special tooling cannot be returned. All claims for shortages must be made within 3 days of the invoice date. Prices and specifications subject to change without prior notice. E & O E. All prices are exclusive of VAT.
Claims
Prices
Delivery Charge
All orders are subject to a delivery charge. Please call the sales desk for a delivery quotation.
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
FEATURES:
1. Most tools can be easily loaded by a single operator.
(S)
415mm
2. Easy to store. 3. All sectionalised tools come pre-cut in nine different pieces. 4. Most sectionalised punches include two ear pieces (horns).
(L) 835mm
5. NITREX(HRC - 60) is available for every punch in the tooling line. 6. Special Tooling available. Please contact the sales desk.
(X) 835mm
SECTION WIDTHS: 100mm LEFT EAR / 100mm RIGHT EAR / 10mm / 15mm / 20mm / 40mm / 50mm / 200mm / 300mm
Note: Special lengths are available at additional cost.
FEATURES:
(S) 415mm
1. Most tools can be easily loaded by a single operator. 2. Easy to store. 3. All sectionalised tools come pre-cut in nine different pieces.
(L) 835mm
4. Most dies are NITREX enhanced (HRC-60) as standard. 5. Special Tooling available. Please contact the sales desk.
(X) 835mm
SECTION WIDTHS: 100mm / 100mm / 10mm / 15mm / 20mm / 40mm / 50mm / 200mm / 300mm
Note: Special lengths are available at additional cost.
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
GOOSENECK PUNCHES GOOSENECK PUNCHES WITH THIN TIP WITH THIN TIP PAGE PAGE 10
2V DIES PAGE 46
2V RAIL RAIL DIE DIE PAGE PAGE 50 2V 2V DIE HOLDERS DIE HOLDERS PAGE PAGE 50
2V DIE HOLDERS PAGE
QUICK CHANGE 1V NARROW 1V DIE HOLDERS DIE HOLDERS PAGE PAGE 60-61
300
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
STEPSTEP 1 1 ACUTE ANGLE ACUTE ANGLE LARGE LARGE 1V DIES 1V DIES PAGE PAGE 62 LARGE LARGE 1V 1V DIES DIES PAGE PAGE 63-65
STEP STEP 2 2
STANDARD PUNCH HOLDER (SUPPLIED WITH MACHINE) STANDARD PUNCH HOLDER (SUPPLIED WITH MACHINE) ORNARROW PUNCH HOLDERS HOLDERS OR NARROW PUNCH PAGE PAGE 73 NARROW PUNCH HOLDERS STACKING PAGE 73 PUNCH HOLDER OR NARROW PUNCH HOLDERS
PAGE
ACUTE ANGLE QUICK ACUTE ANGLE QUICK CHANGE 2V DIE CHANGE 2V DIES PAGE PAGE 44 2V DIE RAIL PAGE 50 2V DIE HOLDERS PAGE 50
LOW PROFILE QUICK CHANGE 1V LOW PROFILE NARROW 1V DIES DIES PAGE 57 PAGE
NARROW 1V DIE HOLDERS QUICK CHANGE 1V PAGE DIE HOLDERS PAGE 60-61
1000
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
DESCRIPTION
Z1 Series with Wedge, 2 Clamp Z1 Series with Wedge, 2 Clamp Interlocking Z1 Series with Wedge, 4 Clamp Z1 Series with Wedge, 4 Clamp Interlocking
PRICE
DESCRIPTION
Z2 Series with Wedge, 2 Clamp Z2 Series with Wedge, 2 Clamp Interlocking Z2 Series with Wedge, 4 Clamp Z2 Series with Wedge, 4 Clamp Interlocking
PRICE
COMPONENT PIECE PRICE Complete Kit Case Pivots Wrench Hex Tips
KIT PRICE
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
DESCRIPTION
For Wila beamed Press Brakes with Wedge
PRICE
DESCRIPTION
For Conventional Press Brakes with Wedge
PRICE
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
Standard 88 Punches
Cat. No. E40002, E40006, E40008, E40015, E40023, E40030
30mm
35mm
R 5mm "H"
35mm
R 9mm 10mm 88
0
MAX. TON per metre (L & S) 100 100 100 100 100 100
L 835mm
S 415mm
X SECTIONALISED
*Note: Punch tip modifications and punch relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC - 60) available for every punch in the tooling range at additional cost.
Standard 90 Punches
Cat. No. E40102, E40108, E40115, E40123, E40130
30mm
35mm
R 5mm "H"
35mm
R 9mm 90
0
10mm
(Ear Piece)
(Ear Piece)
MAX. TON MAX. TON per metre per metre (L & S) (X) 47 100 47 100 47 100 47 100 47 100
L 835mm
S 415mm
X SECTIONALISED
*Note: Punch tip modifications and punch relief available at an additional cost. Contact the application sales desk for pricing and lead times. Nitrex(HRC - 60) available for every punch and die in the tooling line.
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
10mm "H"
R 5mm
R 4mm 90
0
5mm
10mm
R mm 0.2 0.6
MAX. TON MAX. TON per metre per metre (L & S) (X) 20 10 20 10
H 66.9 66.4
L 835mm
S 415mm
X SECTIONALISED
*Note: Punch tip modifications and punch relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC - 60) available for every punch in the tooling range at additional cost.
10mm "H"
R 5mm
R 4.02mm 88
0
5mm
10mm
R mm 0.2
MAX. TON MAX. TON per metre per metre (L & S) (X) 10 20
H 66.9
L 835mm
S 415mm
X SECTIONALISED
*Note: Punch tip modifications and punch relief available at an additional cost. Contact the application sales desk for pricing and lead times. Nitrex(HRC - 60) available for every punch and die in the tooling line.
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
88 Gooseneck Punches
88 Gooseneck Punches
Cat. No. E40302 - E40630
Cat No. E40302
30mm
"H"
35mm
R 5mm
10mm
35mm
R 88
0
"H" R 5mm
35mm
35mm
R 9mm 88
0
*Note: Punch tip modifications and punch relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC - 60) available for every punch in the tooling range at additional cost.
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
88 Gooseneck Punches
88 Gooseneck Punches
Cat. No. E40302 - E40630
Cat No. E40602
(Ear Piece)
CAT. NO. E40302 E40306 E40308 E40402 E40406 E40408 E40415 E40430 E40602 E40606 E40608 E40615 E40630
R mm 0.2 0.6 0.8 0.2 0.6 0.8 1.5 3.0 0.2 0.6 0.8 1.5 3.0
MAX. TON MAX. TON per metre per metre (X) (L & S) 50 50 50 50 50 50 47 50 47 50 47 50 47 50 47 50 47 70 47 70 47 70 47 70 47 70
H 119.9 119.4 119.7 104.9 104.4 104.6 104.3 103.7 89.9 89.4 89.6 89.3 88.7
L 835mm
S 415mm
X SECTIONALISED
*Note: Punch tip modifications and punch relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC - 60) available for every punch in the tooling range at additional cost.
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
(Ear Piece)
MAX. TON MAX. TON per metre per metre (X) (L & S) 50 30 50 30 30 50
L 835mm
S 415mm
X SECTIONALISED
*Note: Punch tip modifications and punch relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC - 60) available for every punch in the tooling range at additional cost.
(Ear Piece)
R mm 0.2 0.8
MAX. TON MAX. TON per metre per metre (X) (L & S) 50 30 50 30
H 89.9 89.7
L 835mm
S 415mm
X SECTIONALISED
*Note: Punch tip modifications and punch relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC - 60) available for every punch in the tooling range at additional cost.
10
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
90 Gooseneck Punches
Cat. No. E40502
(Ear Piece)
R mm 0.2
MAX. TON MAX. TON per metre per metre (L & S) (X) 47 50
H 104.9
L 835mm
S 415mm
X SECTIONALISED
*Note: Punch tip modifications and punch relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC - 60) available for every punch in the tooling range at additional cost.
85 Gooseneck Punches
Cat. No. E44540 and E44560
(Ear Piece)
R mm 4.8 6.35
MAX. TON MAX. TON per metre per metre (X) (L & S) 100 47 100 47
H 105.0 104.3
L 835mm
S 415mm
X SECTIONALISED
*Note: Punch tip modifications and punch relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC - 60) available for every punch in the tooling range at additional cost.
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
11
88 Narrow Punches
Cat. No. E40802 and E40806
R mm 0.2 0.6
H 95.0 94.5
L 835mm
S 415mm
X SECTIONALISED
*Note: Sectionalised version does not include ear pieces (horns). Ear pieces (horns) available at additional cost. Punch tip modifications and punch relief available at additional cost. Contact the sales desk for pricing and lead times. Nitrex(HRC - 60) available for every punch in the tooling range at additional cost.
90 Narrow Punches
Cat. No. E40902
R mm 0.2
H 95.0
L 835mm
S 415mm
X SECTIONALISED
*Note: Sectionalised version does not include ear pieces (horns). Ear pieces (horns) available at additional cost. Punch tip modifications and punch relief available at additional cost. Contact the sales desk for pricing and lead times. Nitrex(HRC - 60) available for every punch in the tooling range at additional cost.
12
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
88 Sash Punches
88 Sash Punches
Cat. No. E41002, E41006, E41102, E41106
Cat No. E41002
(Ear Piece)
(Ear Piece)
L 835mm
S 415mm
X SECTIONALISED
*Note: Punch tip modifications and punch relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC - 60) available for every punch in the tooling range at additional cost.
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
13
90 Sash Punches
Cat. No. E41202
(Ear Piece)
R mm 0.2
H 69.9
L 835mm
S 415mm
X SECTIONALISED
*Note: Punch tip modifications and punch relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC - 60) available for every punch in the tooling range at additional cost.
30 Acute-Angle Punches
Cat. No. E41908
30mm
"H"
20mm
R 8mm
18mm
30
R mm 0.8
H 104.0
L 835mm
S 415mm
X SECTIONALISED
*Note: Punch tip modifications and punch relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC - 60) available for every punch in the tooling range at additional cost.
14
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
30 Acute-Angle Punches
30 Acute-Angle Punches
Cat. No. E41315 and E41330
R mm 1.5 3.0
MAX. TON MAX. TON per metre per metre (X) (L & S) 100 100 100 100
H 102.0 97.7
L 835mm
S 415mm
X SECTIONALISED
*Note: Sectionalised version does not include ear pieces (horns). Ear pieces (horns) available at additional cost. Punch tip modifications and punch relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC - 60) available for every punch in the tooling range at additional cost.
30 Acute-Angle Punches
Cat. No. E42610
30mm
"H"
18.24mm R
300
R mm 0.8
H 65.5
L 835mm
S 415mm
X SECTIONALISED
*Note: Sectionalised version does not include ear pieces (horns). Ear pieces (horns) available at additional cost. Punch tip modifications and punch relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC - 60) available for every punch in the tooling range at additional cost.
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
15
60 Acute-Angle Punches
60 Acute-Angle Punches
Cat. No. E41440 and E41460
R mm 4.8 6.0
H 66.2 65.0
L 835mm
S 415mm
X SECTIONALISED
*Note: Sectionalised version does not include ear pieces (horns). Ear pieces (horns) available at additional cost. Punch tip modifications and punch relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC - 60) available for every punch in the tooling range at additional cost.
16
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
75 Punches
75 Punches
Cat. No. E44000 - E44033
(Ear Piece)
(Ear Piece)
CAT. NO. E44000 E44001 E44003 E44030 E44031 E44033 R mm 0.8 1.5 3.0 0.8 1.5 3.0
MAX. TON MAX. TON per metre per metre (L & S) (X) 100 47 100 47 100 47 50 50 50 50 50 50
L 835mm
S 415mm
X SECTIONALISED
*Note: Punch tip modifications and punch relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC - 60) available for every punch in the tooling range at additional cost.
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
17
75 Punches
75 Punches
Cat. No. E44010 - E44040
Cat No. E44020
(Ear Piece)
30mm
"H"
10mm R
75
CAT. NO. E44020 E44021 E44023 E44010 E44011 E44013 *E44040 R mm 0.8 1.5 3.0 0.8 1.5 3.0 0.8
MAX. TON MAX. TON per metre per metre (L & S) (X) 47 70 47 70 70 47 50 50 50 50 50 50 50 47
L 835mm
S 415mm
X SECTIONALISED
*Note: Sectionalised version does not include ear pieces (horns). Ear pieces (horns) available at additional cost. (E44010 only) Punch tip modifications and punch relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC - 60) available for every punch in the tooling range at additional cost.
18
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
Punch Bodies
Cat. No. 46150 - 46152
Cat No. 46150 Cat No. 46151 Cat No. 46152
H 67 90 90
L 522mm N/A
Punch Inserts
Cat. No. 46153 - 46172
CAT. NO. 46153 46154 46155 46156 46157 46158 46159 46160 46161 46162 46163 46164 46165 46166 46167 46168 46169 46170 46171 46172
Section
UK Ireland
MAX. TON per metre 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
L 835mm
L 525mm N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
X (495mm) SECTIONALISED N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
*Note: Sectionalised Radius inserts sold in sets only widths: (46151 & 46152) 170,100, 50, 45, 40, 35, 30, 25
Fax (Free): Fax (Free): 0800 012 1476 1-800 535 538 email: pb.sales@wilsontool.eu.com
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
19
"H" "H"
R 9.5 mm R 12.7 mm
"H"
"H"
15.9mm
R 19mm
L 835mm
S 415mm
X SECTIONALISED
*Note: Sectionalised version does not include ear pieces (horns). Ear pieces (horns) available at additional cost. Nitrex(HRC - 60) available for every punch in the tooling range at additional cost. Additional radii available, please contact the sales desk.
20
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
"H"
"H"
R 22.2mm
R 25.4mm
H 94.0 96.0
L 835mm
S 415mm
X SECTIONALISED
*Note: Sectionalised version does not include ear pieces (horns). Ear pieces (horns) available at an additional cost. Nitrex(HRC - 60) available for every punch and die in the tooling line. Additional radii available, please contact our application sales desk.
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
21
Flattening Punches
Flattening Punches
Cat. No. 41523 and 41630
40mm
"H"
23mm
14mm "H"
30mm 12mm
H 65.0 84.0
L 835mm
S 415mm
*Note: Nitrex(HRC - 60) available for every punch in the tooling range at additional cost.
22
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
CATALOGUE NO. E40002, E40006, E40008, E40015, E40023, E40030, E40102, E40108, E40115, E40123, E40130
60 50 40 30 20 10
W L
10
20
30
40
50
60
70
80
90
100
1 10
120
130
140
150
160
170
180
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
23
220 210 200 190 180 170 160 150 140 130 120 1 10 100 90 80 70
60 50 40 30 20 10
W L
10
20
30
40
50
60
70
80
90
100
1 10
120
130
140
150
160
170
180
24
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
60 50 40 30 20 10
W L
10
20
30
40
50
60
70
80
90
100
1 10
120
130
140
150
160
170
180
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
25
220 210 200 190 180 170 160 150 140 130 120 1 10 100 90 80 70
60 50 40 30 20 10
W
10
20
30
40
50
60
70
80
90
100
1 10
120
130
140
150
160
170
180
26
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
27
28
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
W
10 20 30 40 50 60 70 80 90 100 1 10 120 130 140 150 160 170 180
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
29
W
10 20 30 40 50 60 70 80 90 100 1 10 120 130 140 150 160 170 180
30
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
W
10 20 30 40 50 60 70 80 90 100 1 10 120 130 140 150 160 170 180
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
31
220 210 200 190 180 170 160 150 140 130 120 1 10 100 90 80 70 60 50 40 30 20 10
W
10 20 30 40 50 60 70 80 90 100 1 10 120 130 140 150 160 170 180
32
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
10
20
30
40
50
60
70
80
90
100
1 10
120
130
140
150
160
170
180
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
33
L
Z2 STYLE (SOLID LINES)
60 50 40 30 20 10
W L
10
20
30
40
50
60
70
80
90
100
1 10
120
130
140
150
160
170
180
34
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
60 50 40 30 20 10
W L
10
20
30
40
50
60
70
80
90
100
1 10
120
130
140
150
160
170
180
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
35
60 50 40 30 20 10
W L
10
20
30
40
50
60
70
80
90
100
1 10
120
130
140
150
160
170
180
36
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
60 50 40 30 20 10
W L
10
20
30
40
50
60
70
80
90
100
1 10
120
130
140
150
160
170
180
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
37
60 50 40 30 20 10
W L
10
20
30
40
50
60
70
80
90
100
1 10
120
130
140
150
160
170
180
38
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
39
60 50 40 30 20 10
W L
10
20
30
40
50
60
UK Ireland
70
80
90
100
1 10
Fax (Free): Fax (Free):
120
130
140
150
email:
160
170
180
190
40
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
pb.sales@wilsontool.eu.com
90
4mm 7mm 6mm 3.5mm 5mm 4.5mm
90
10mm 6.5mm
R 0.4mm (2)
R 0.6mm (2)
13mm
13mm
15.05mm
90
14mm 8mm 12mm 8.5mm 5.5mm 7.5mm
90
18mm 10.5mm
46mm
R 0.5mm (2)
R 0.8mm (2)
46mm
R 0.5mm (4)
13mm
13mm
13mm
13mm
*Note: V-opening modifications and die relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC-60) is standard on the dies on this page at no additional cost.
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
41
88
4mm 7mm 6mm 3.5mm 5mm 4.5mm
88
10mm 6.5mm
R 0.4mm 46mm
R 0.6mm
13mm
13mm
88
14mm 8mm 12mm 8.5mm 5.5mm 7.5mm
88
18mm 10.5mm
46mm
R 0.5mm (2)
R 0.8mm (2)
13mm
13mm
*Note: V-opening modifications and die relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC-60) is standard on the dies on this page at no additional cost.
42
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
88
12mm 7.5mm 20mm 12mm 16mm 9.5mm
88
25mm 14.5mm
46mm
R 0.5mm (4)
46mm
13mm
13mm
6.5mm 45.5mm
15.05mm
CAT. NO. E42000 *E42001 *E42002 E42003 E42008 E42007 E42009 *E42004 *E42005 *E42006
L 835mm
S 415mm
X SECTIONALISED
Note: V-opening modifications and die relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC-60) is standard on the dies on this page at no additional cost. *Quick change 2V dies available in urethane. Please call our sales desk for pricing and lead time.
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
43
90
6mm 10mm 6mm 6mm 8mm 6mm
88
10mm 12mm 8mm 10mm
88
20mm 14mm
46mm
R 1.5mm (2)
R 1.5mm 13mm
R 3mm (2)
13mm
13mm
13mm
15.05mm
L 835mm
S 415mm
X SECTIONALISED
*Note: V-opening modifications and die relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC-60) is standard on the dies on this page at no additional cost.
30
6mm 10mm 14.5mm 8mm 9mm 15mm
30
12mm 18mm
R 1mm (4)
13mm
13mm
13mm
15.05mm
L 835mm
S 415mm
X SECTIONALISED
Note: V-opening modifications and die relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC-60) is standard on the dies on this page at no additional cost . *Quick change 2V dies available in urethane. Please call our sales desk for pricing and lead time.
44
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
75
10mm 16mm 6mm 7.7mm 11.2mm 5.2mm
75
20mm 13.5mm
R 3.5mm 46mm
R 1.5mm
R 4mm
13mm
13mm
75
10mm 22mm 12mm 7.7mm 14.7mm 9mm
75
25mm 16.7mm
R 4.5mm 46mm
R 3mm
R 5.5mm
13mm
13mm
6.5mm 48.5mm
15.05mm
L 835mm
S 415mm
X SECTIONALISED
*Note: V-opening modifications and die relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC-60) is standard on the dies on this page at no additional cost.
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
45
90
4mm 3.5mm 7mm 5mm 6mm 4.5 mm
90
10mm 6.5mm
26mm
R 0.4mm (4)
26mm
R 0.4mm (2)
R 0.6mm (2)
50mm
50mm
90
8mm 5.5mm 12mm 7.5mm 14mm 8.5mm
90
18mm 10.5mm
R 0.8mm (2)
26mm
R 0.5mm (4)
50mm
50mm
88
14mm 18mm 12mm 7.5mm 8.5mm 10.5mm
88
20mm 12mm
26mm
R 0.5mm (4)
50mm
50mm
88
16mm 9.5mm 25mm 14.5mm
L 835mm
S 415mm
26mm
R 0.8mm (4)
50mm
*Note: All mounting hardware is included. V-opening modifications and die relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC-60) is standard on the dies on this page at no additional cost.
46
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
90
6mm 6mm 10mm 10mm 12mm 10mm
88
20mm 15mm
26mm
R 1.5mm (2)
R 2.5mm (2)
26mm
R 3mm (2)
R 4mm (2)
55mm
55mm
L 835mm
S 415mm
*Note: All mounting hardware is included. V-opening modifications and die relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC-60) is standard on the dies on this page at no additional cost.
90
4mm 3.5mm 7mm 5mm 6mm 4.5mm
90
10mm 6.5mm
46mm
R 0.4mm (4)
46mm
R 0.4mm (2)
R 0.6mm (2)
X SECTIONALISED
*Note: V-opening modifications and die relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC-60) is standard on the dies on this page at no additional cost.
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
47
90
8mm 5.5mm 12mm 7.5mm 14mm 8.5mm
90
18mm 10.5mm
46mm
R 0.5mm (2)
R 0.8mm (2)
46mm
R 0.5mm (4)
15.05mm
88
14mm 18mm 10.5mm 12mm 8.5mm 7.5mm
88
20mm 12mm
46mm
R 0.5mm (4)
46mm
R 0.5mm (4)
15.05mm
88
16mm 9.5mm 25mm 14.5mm
46mm
R 0.8mm (4)
X SECTIONALISED
*Note: V-opening modifications and die relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC-60) is standard on the dies on this page at no additional cost.
48
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
90
6mm 6mm 10mm 10mm 12mm 10mm
88
20mm 15mm
46mm
R 1.5mm (2)
R 2.5mm (2)
46mm
R 3mm (2)
R 4mm (2)
15.05mm
X SECTIONALISED
*Note: V-opening modifications and die relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC-60) is standard on the dies on this page at no additional cost.
90
6mm 10mm 8mm 4.5mm 6.5mm 5.5mm
90
12mm 7.5mm
R 0.4mm (2)
R 0.6mm (2)
R 0.5mm (2)
16mm
6.5mm
15.05mm
16mm
6.5mm
50mm
X SECTIONALISED
*Note: V-opening modifications and die relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC-60) is standard on the dies on this page at no additional cost.
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
49
10mm
50mm
END VIEW
FRONT VIEW
L 835mm
S 415mm
Stacking Rails
Cat. No. 42091 and 42092
Cat No. 42092
15mm
CAT. NO.
["X"]
LT 835mm
ST 415mm
XT SECTIONALISED
7mm
15mm 50mm
2V Die Holders
Cat. No. 43021, 43022, 43021LAT, 43021SAT, 43022LAT, 43022SAT
Cat No. 43021
39mm
60mm 60mm
39mm
45mm
CAT. NO.
[ "X" ] 60mm
L 835mm
S 415mm
[ "X" ] 60mm
43021 43022 43021 LAT 43021 SAT 43022 LAT 43022 SAT
50
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
30
30
30
30
L 835mm
S 415mm
X SECTIONALISED
*Note: Quick Change 1V Dies require die holder No. 46220/46221. V-opening modifications and die relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC-60) is standard on the dies on this page at no additional cost.
UK Ireland Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009 Fax (Free): Fax (Free): 0800 012 1476 1-800 535 538 email: pb.sales@wilsontool.eu.com
51
60
60
60
60
60
60
60
MAX. TON per metre 100 100 100 100 100 100 100
L 835mm
S 415mm
X SECTIONALISED
*Note: Quick Change 1V Dies require die holder No. 46220/46221. V-opening modifications and die relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC-60) is standard on the dies on this page at no additional cost.
52
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
88
88
88
88
88
88
88
88
88
CAT. NO. E42821 E42822 E42823 E42824 E42825 E42826 E42827 E42828 E42829
UK Ireland Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
MAX. TON per metre 100 100 100 100 100 100 100 100 100
Fax (Free): Fax (Free):
L 835mm
S 415mm
X SECTIONALISED
*Note: Quick Change 1V Dies require die holder No. 46220/46221. V-opening modifications and die relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC-60) is standard on the dies on this page at no additional cost.
email:
pb.sales@wilsontool.eu.com
53
90
90
90
90
90
L 835mm
S 415mm
X SECTIONALISED
*Note: Quick Change 1V Dies require die holder No. 46220/46221. V-opening modifications and die relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC-60) is standard on the dies on this page at no additional cost.
54
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
90
6mm 10mm
90
R 1.5mm (2)
R 2mm (2)
90
12mm 8mm
90
R 2.5mm (2)
R 1.5mm (2)
83.5mm
14mm
*Note: Quick Change 1V Dies require die holder No. 43030/43530. V-opening modifications and die relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC-60) is standard on the dies on this page at no additional cost.
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
55
88
6mm 8mm
88
10mm
88
R 1.5mm (2)
R 1.5mm (2)
R 2mm (2)
83.5mm 14mm
83.5mm 14mm
83.5mm
14mm
88
12mm 14mm
88
R 2.5mm (2)
R 2.5mm (2)
83.5mm
17mm
83.5mm
18mm
14mm
14mm
CAT. NO. E42100 E42101 E42102 E42103 E42104 E42105 E42120 E42121 E42122
MAX. TON per metre 100 100 100 100 100 100 100 100 100
L 835mm
S 415mm
X SECTIONALISED
*Note: Quick Change 1V Dies require die holder No. 43030. V-opening modifications and die relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC-60) is standard on the dies on this page at no additional cost.
56
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
90
6mm 8mm 30mm 30mm
90
10mm
90
12mm
88
R 2.5mm (2) 17mm
R 1.5mm (2)
R 1.5mm (2)
30mm
R 2mm (2)
30mm
14mm
14mm
14mm
14mm
CAT. NO.
S 415mm
X SECTIONALISED
*Note: Low Profile Quick Change 1V Dies require die holder No.43030. Low Profile Quick Change 1V Dies No.E42110 and No.E42112 are available in 88 versions at additional cost. V-opening modifications and die relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC-60) is standard on the dies on this page at no additional cost. Available in L (long) at additional cost.
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
57
30
30
30
30
30
30
MAX. TON per metre 100 100 100 100 100 100
L 835mm
S 415mm
X SECTIONALISED
*Note: V-opening modifications and die relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC-60) is standard on the dies on this page at no additional cost.
58
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
75
3mm
75
6mm
75
10mm
75
12mm
R 0.4mm
R 1.5mm
R 2.5mm
R 3mm
83.5mm
14mm
83.5mm
14mm
83.5mm
17mm
83.5mm
19mm
14mm
14mm
75
16mm
75
20mm
75
22mm
75
25mm
R 3.5mm
R 4mm
R 4.5mm
R 5.5mm
83.5mm
24mm
83.5mm
83.5mm 28mm
32mm
83.5mm
36mm
14mm
14mm
14mm
14mm
CAT. NO. E44200 E44201 E44202 E44203 E44204 E44205 E44206 E44207
MAX. TON per metre 100 100 100 100 100 100 100 100
L 835mm
S 415mm
X SECTIONALISED
*Note: V-opening modifications and die relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC-60) is standard on the dies on this page at no additional cost.
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
59
H 61.5 61.5
L 835mm
S 415mm
60
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
Quick Change 1V DieQuick Change 1V Dies For 83.5mm High Holder And Wedge Block
Cat. No. 43030, 43530 and 43559
TOP VIEW
30mm 14.1mm
60mm
1.102 (28)
.066 (22)
2.362 (60)
L 835mm
S 415mm
*Note: Available with die tang. Contact the sales desk for prices and lead times.
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
61
30
18mm
30
25mm
R 4mm (2)
60mm
60mm
45
32mm R 5mm (2) 60mm 80mm
45
40mm
R 5mm (2)
60mm
60mm
45
50mm
80mm
R 6mm (2)
95mm
L 835mm
S 415mm
*Note: Acute-Angle Large 1V Dies may require die holder No.43040. Check height against machine stroke prior to ordering. V-opening modifications and die relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC - 60) is available for these dies at an additional cost.
60mm 95mm
62
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
Large 1V Dies
Large 1V Dies
Cat. No. E42400 - E42403
Cat No. E42400 Cat No. E42401
85
32mm
85
40mm
R 4mm (2)
60mm
60mm
85
50mm
85
63mm
75mm
60mm
60mm
80mm
L 835mm
S 415mm
*Note: Large 1V Dies may require die holder No.43040. Check height against machine stroke prior to ordering. V-opening modifications and die relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC - 60) is available for these dies at an additional cost.
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
63
Large 1V Dies
Large 1V Dies
Cat. No. E42404 and E42405
Cat No. E42404
85
80mm
R 6mm (2)
95mm
60mm
95mm
85
100mm R 7mm (2)
110mm
60mm
120mm
*Note: V-opening modifications and die relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC - 60) is available for these dies at an additional cost.
64
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
Large 1V Dies
Large 1V Dies
Cat. No. E42406
Cat No. E42406
80
125mm
R 9mm (2)
R 123mm
L 835mm
S 415mm
90mm
154mm
*Note: Large 1V Dies may require die holder No.43040. Check height against machine stroke prior to ordering. Please check width of lower beam of press brake prior to ordering die No.42406. V-opening modifications and die relief available at additional cost. Contact the sales desk for prices and lead times. Nitrex(HRC - 60) is available for this die at an additional cost.
50mm
60mm
L 835mm
S 415mm
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
65
Quick Change Rail Style Flattening Die, 3V Hemming Die & Flattening Die
L 835mm
14.5mm 15.05mm
50mm
*Note: Designed to run with standard 2V Quick Change die system. Custom heights available for stage bending. Contact the sales desk for pricing and lead times. Nitrex(HRC-60) is standard on the dies on this page at no additional cost.
3V Hemming Die
Cat. No. 42310
30
12mm
10mm
60mm
CAT. NO.
R 1mm (2) R 1mm (2)
42310
L 835mm
S 415mm
60mm
Flattening Die
Cat. No. 42311
Cat No. 42311
104.4mm
79mm
96mm
L 835mm
S 415mm
66
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
Hemming Dies
Hemming Dies
Cat. No. 42601 - 42603 and 43522 - 43524
Cat No. E42601
16mm 6mm 14mm 8mm
R 1mm (2)
R 1mm (2)
23mm
23mm
116.5mm
116.5mm
60mm
60mm
R 1mm (2)
31mm
23mm
23mm
124.5mm
22mm 31mm
60mm
MAX. MAX. TON MATERIAL per metre C.R.S. 67 67 67 67 67 67 1.0mm 1.5mm 2.0mm 1.0mm 1.5mm 2.0mm
L 835mm
S 415mm
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
67
2 Stage Process
Stage 1
Stage 2
L 835mm
S 415mm
X SECTIONALISED N/A
68
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
Urethane Holders
Urethane Holders
Cat. No. 42501 - 42504
Cat No. 42502 Cat No. 42501
30mm 50mm
43mm 100mm
60mm
83mm
120mm
108mm
L 835mm
S 415mm
*Note: All urethane die holders are machined from 6061-T6 aluminium. Urethane holders may require die holder #43040. Check height against machine stroke prior to ordering.
60mm
150mm
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
69
Urethane Pads
Urethane Pads
Cat. No. 42511 - 42524
25mm 50mm
30mm
50mm
30mm 45mm
80mm
110mm
CAT. NO. 42511 42521 42512 42522 42513 42523 42514 42524
SHORE HARDNESS 80A / Red 90A / Blue 80A / Red 90A / Blue 80A / Red 90A / Blue 80A / Red 90A / Blue
L 835mm
S 415mm
70
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
94mm
*
92.88mm
*
4.8mm
91.76mm
3.18mm
6.4mm
90.65mm
89.51mm
88.39mm
7.9mm
9.52mm
11.1mm
87.27mm
12.7mm
*Note: *Dimensions are for shut height requirements less material thickness. Offset height may vary as much as + 0.5mm after bending. All angles will be obtuse. Special offset sizes are available at additional cost. Nitrex(HRC-60) is standard on the dies on this page at no additional cost. Quick change offset tools are available at additional cost.
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
71
Accessories
Side Gauge and Protractor Assembly with Case Cat No. 42702
CAT. No. 42702 42704 42705 PRICE
Sheet Support Pad Cat No. 42708 Adjustable Back Gauge Stopper Plate Cat No. 42703
CAT. NO. 42703 PRICE
*Note: Quick Change Back Gauge Stopper Pads are for Amada Style Back Gauges.
72
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
Accessories
Squaring Arm
Cat. No. 47000, 47001
The Wilson Squaring Arm from Wilson Tool Press Brake is a flexible tool enabling you to get more parts through your Press Brake with a high accuracy.
Available for RH or LH loading of parts Simple and quick to fit Can be used for bending parts at an angle Makes bending small parts much easier and safer Can be used as end stop for Z bends
PRICE
Side Gauge
Cat. No. 42701
CAT. NO. 42701 PRICE
*Note: Intended for use with Quick Change, 2V, Sectionalised 2V, and Quick Change 1V Dies.
Urethane Rolls
Cat. No. 42530 and 42531
*Note: Urethane dies are also available for mark-free bending. Contact the sales desk for prices and lead times.
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
73
7mm
130mm
100mm
50mm
150mm 120mm
50mm
50mm
74
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
250mm
220mm
150mm
Note: Punch holder No.43002 is available for Z2 style upper beams (rams) only. Please consult the sales desk prior to ordering.
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
75
Benefits:
The ability to use clamps hard up against one another for support over the full length of the form (interlocking wedge models only) A more cost-effective alternative for those not using the Wilson Express Clamping System High quality products and great value for money. Our new lower pricing reflects how our Lean manufacturing processes can directly benefit our customers The Clamps are durable, scratch and corrosion-resistant The location faces do not damage the tools due to the lubricity of the Nitrex TM surface treatment which is provided as standard The ability to upgrade single clamps to dual clamps (interlocking and non-interlocking) by using the handy upgrade kits Fast and efficient delivery as these items are in stock
76
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
No. 1 2 3 4 5 6 7 8 9
CAT. NO. E43700 43709 30160 E43519F 43504 E43505 E43702 43499 E43708
DESCRIPTION Z1 Wedge Face Plate 5/16 Hardened Washer M8 x 30 Lg S.H.C.S. Safety Clamp M10 x 35mm Lg S.H.C.S. 14.3mmO x 22.2mm Lg Spring / Z1 Wedge Punch Holder Body M8 x 25mm Lg S.H.C.S. Z1 Wedge
QTY
PRICE
1 1 1 1 2 2 1 2 1
No. 1 2 3 4 5 6 7 8 9
CAT. NO. E43700 43709 30160 E43519F 43504 E43505 E43702 43499 E43708i
DESCRIPTION Z1 Wedge Face Plate 5/16 Hardened Washer M8 x 30 Lg S.H.C.S. Safety Clamp M10 x 35mm Lg S.H.C.S. 14.3mmO x 22.2mm Lg Spring / Z1 Wedge Punch Holder Body M8 x 25mm Lg S.H.C.S. Z1 Inter-Locking Wedge
QTY
PRICE
1 1 1 1 2 2 1 2 1
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
77
No. 1 2 3 4 5 6 7 8 9 10
CAT. NO. E43700 43709 30160 E43519F 24302 E43505 E43702 43486 43499 E43708
DESCRIPTION Z1 Wedge Face Plate 5/16 Hardened Washer M8 x 30 Lg S.H.C.S. Safety Clamp M10 x 35mm Lg S.H.C.S. 14.3mmO x 22.2mm Lg Spring / Z1 Wedge Punch Holder Body M10 Locking Cap With Screw M8 x 25mm Lg S.H.C.S. Z1 Wedge
QTY
PRICE
1 1 1 2 2 4 1 2 2 1
No. 1 2 3 4 5 6 7 8 9 10
CAT. NO. E43700 43709 30160 E43519F 24302 E43505 E43702 43486 43499 E43708i
DESCRIPTION Z1 Wedge Face Plate 5/16 Hardened Washer M8 x 30 Lg S.H.C.S. Safety Clamp M10 x 35mm Lg S.H.C.S. 14.3mmO x 22.2mm Lg Spring / Z1 Wedge Punch Holder Body M10 Locking Cap With Screw M8 x 25mm Lg S.H.C.S. Z1 Inter-Locking Wedge
QTY
PRICE
1 1 1 2 2 4 1 2 2 1
78
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
No. 1 2 3 4 5 6 7 8
CAT. NO. E43731 43709 30160 E43519F 43504 E43505 E43729 E43730
DESCRIPTION Z2 Wedge Face Plate 5/16 Hardened Washer M8 x 30 Lg S.H.C.S. Safety Clamp M10 x 35mm Lg S.H.C.S. 14.3mmO x 22.2mm Lg Spring / Z2 Wedge Punch Holder Body Z2 Wedge
QTY
PRICE
1 1 1 1 4 2 1 1
No. 1 2 3 4 5 6 7 8
UK Ireland Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
CAT. NO. E43731 43709 30160 E43519F 43504 E43505 E43729 E43730i
Fax (Free): Fax (Free):
DESCRIPTION Z2 Wedge Face Plate 5/16 Hardened Washer M8 x 30 Lg S.H.C.S. Safety Clamp M10 x 35mm Lg S.H.C.S. 14.3mmO x 22.2mm Lg Spring / Z2 Wedge Punch Holder Body Z2 Inter-Locking Wedge
0800 012 1476 1-800 535 538 email:
QTY
PRICE
1 1 1 1 4 2 1 1
pb.sales@wilsontool.eu.com
79
No. 1 2 3 4 5 6 7 8 9 10
CAT. NO. E43731 43709 30160 E43519F 24302 E43505 E43729 43486 43504 E43730
DESCRIPTION Z2 Wedge Face Plate 5/16 Hardened Washer M8 x 30 Lg S.H.C.S. Safety Clamp M10 x 70mm Lg 14.3mmO x 22.2mm Lg Spring / Z2 Wedge Punch Holder Body M10 Locking Cap With Screw M10 x 35mm Lg S.H.C.S. Z2 Wedge
QTY
PRICE
1 1 1 2 2 4 1 2 2 1
No. 1 2 3 4 5 6 7 8 9 10
CAT. NO. E43731 43709 30160 E43519F 24302 E43505 E43729 43486 43504 E43730i
DESCRIPTION Z2 Wedge Face Plate 5/16 Hardened Washer M8 x 30 Lg S.H.C.S. Safety Clamp M10 x 70mm Lg 14.3mmO x 22.2mm Lg Spring / Z2 Wedge Punch Holder Body M10 Locking Cap With Screw M10 x 35mm Lg S.H.C.S. Z2 Inter-Locking Wedge
QTY
PRICE
1 1 1 2 2 4 1 2 2 1
80
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
No. 1 2 3 4
DESCRIPTION M10 Locking Cap With Screw 5/16 14.3mmO x 22.2mm Lg Spring / Safety Clamp M10 x 70mm Lg S.H.C.S
QTY
PRICE
2 2 1 2
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
81
39mm
60mm
L 835mm
S 415mm
*Note: Please verify press brake tongue slot width when ordering.
50.8mm
60mm
*Note: Please contact the sales desk for a list of information that will be required prior to ordering. Solid piece made to length for bed of press brake. Please contact the sales desk.
82
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
PRICE
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
83
Index
2V Dies 2V Die Holders 2V Die Rail And Clamp 2V Dies With Large Shoulder Radii 3V Hemming Die 30 Acute-Angle Punches 60 Acute-Angle Punches 75 Punches 85 Gooseneck Punches 88 Gooseneck Punches 88 & 90 Gooseneck Punches With Thin Tip 88 Narrow Punches 88 Sash Punches 90 Gooseneck Punches 90 Narrow Punches 90 Sash Punches Acute-Angle Large 1V Dies Acute-Angle Quick Change 1V Dies Acute-Angle Quick Change 2V Dies Air Bending Force Chart Metric Bend Limit Graphs Deep Punch Holder Dual Clamping Kits European Die Holders European Punch Holders Express Clamping System Flattening Die Flattening Punches Hemming Dies Large 1V Dies Large 1V Die Holder 46 50 50 49 66 14-15 16 17-18 11 8-9 10 12 13 11 12 14 62 58 44 85 23-40 74 77, 79 81 80 4-5 66 22 66 63-65 65 Large Radius Punches Low Profile Quick Change 1V Dies Low Profile Sectionalised 2V Dies Narrow Punch Holders Quick Change 1V Die Holder And Wedge Block Quick Change 1V Dies Quick Change 2V Dies Quick Change 2V Dies With Large Shoulder Radii Quick Change 75 1V Dies Quick Change 75 2V Dies Quick Change Back Gauge Stopper Pads Quick Change Rail Style Flattening Die Quick Reference Chart Rail Style Offset Tools Sectionalised 2V Dies Sectionalised 2V Dies With Large Shoulder Radii Side Gauge Squaring Arm Stacking Rails Standard 88 Punches Standard 90 Punches Standard 88 & 90 Punches With Thin Tip Standard Die Lengths Standard Punch Lengths Tooling Cabinet Urethane Holders Urethane Pads Urethane Rolls 49 73 73 50 6 6 7 1 1 82 69 70 73 44 59 45 72 66 2-3 71 47-48 60-61 51-56 41-46 20-21 57 49 73
84
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
Notes
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
85
Notes
86
UK Ireland
Tel (Free): 0800 012 1475 Tel (Free): 1-800 709 009
email:
pb.sales@wilsontool.eu.com
METRIC
V
MATERIAL THICKNESS: 2.6mm OR LESS = T x 6 3.0mm - 8.0mm = T x 8 9.00mm - 12.00mm = T x 10 14.00mm & THICKER = T x 12
NOTE: The above formulas are for reference only. For more specific information, please refer to the chart below.
V (mm) MF IR 12 8.6 2.0 50 37.5 8.3 63 47.3 10.5 80 60.0 13.3 100 75.0 16.7
4 2.8 0.7
7 4.9 1.2 14 16 10.1 11.5 2.3 2.7 25 20 22 14.4 * 15.8 18.0 3.3 3.7 4.2 32 40 24.0 30.0 5.3 6.7
8 5.6 1.3
10 7.0 1.7
125 160 200 250 96.3 123.2 154.0 192.5 20.8 26.7 33.3 41.7
4.5 6.0 4.4 7.0 5.5 10.8 8.4 14.0 12.6 17.6 16.0 22.0 7.5 6.6 9.8 8.8 14.4 11.2 20.0 18.0 25.3 23.0 28.6 7.7 10.0 16.0 20.7 26.0 33.0 8.8 14.0 18.4 23.4 30.0 35.2 12.5 16.1 20.8 28.53 31.9 38.5 12.7 14.3 21.0 22.4 28.0 36.0 45.0 55.0 16.5 17.6 21.9 28.0 36.0 45.0 60.0 11.0 14.4 18.2 27.0 28.8 35.0 44.0 14.4 15.8 22.0 28.1 35.0 54.0
T O N S
P E R
THICKNESS 0.5mm 0.6mm 0.8mm 1.0mm 1.2mm 1.4mm 1.6mm 2.0mm 2.3mm 2.6mm 3.0mm 3.2mm 3.5mm 4.0mm 4.5mm 5.0mm 6.0mm 7.0mm 9.0mm 10.0mm 12.0mm 16.0mm 19.0mm 22.0mm 25.0mm 30.0mm 14.0 18.0 20.3 26.3 37.5 56.0 22.5 31.5 43.8 72.0 90.0
M E T R E
24.0 31.5 28.0 56.3 40.5 70.0 52.5 45.0 108. 84.0 63.0 54.0 0 144. 112.0 84.0 0 152.0 118.8 176.0 225.0
T = M AT E R I A L T H I C K N E S S
V = V- O P E N I N G
IR = INSIDE RADIUS
Soft Brass..................................... Tons Per Metre x 50% Soft Aluminium............................. Tons Per Metre x 50% Heat Treated Aluminium Alloys..... Tons Per Metre x 100% Stainless Steel.............................. Tons Per Metre x 150%
The bending force (tonnage) figures listed above are based on mild steel with a tensile strength of 45-50 kilograms per square millimetre. To calculate the approximate bending force (tonnage) requirements for other materials, please use the multipliers listed.
Note: * Based on bending to an included angle of 88 degrees. This dimension will increase when bending to an included angle of less than 88 degrees.
The three divisions of Wilson Tool Punch Press, Press Brake and Xtra represent the most comprehensive line of tooling systems and accessories available. Our ability to consistently provide innovative, high quality products that outlast and outperform the competition is why the worlds most successful fabricators rely upon Wilson Tool tooling systems.
France
Bt B 51 Rue DOurdy 77550 Rau, France Tel: +33 (0) 164 13 47 80 Fax: +33 (0) 164 13 47 81 Email: ventes@wilsontool.eu.com
A knowledgeable global sales force, multilingual customer support staff, same-day shipping and extensive distribution network are just a few of the benefits that keep our customers coming back time and again.
Germany
Gottlieb Daimler Str 2 31552 Rodenberg, Germany Tel: +49 5723 747 0 Fax: +49 5723 747 10 Email: verkauf@wilsontool.eu.com
Scandinavia
Islevdalvej 100 DK-2610, Rodovre, Denmark Tel: +45 44 53 16 99 Fax: +45 44 53 06 07 Email: sales@wilsontool.dk
China
No. 6 Building of 58 4018 Lane Huaning Road Xinzhuang Industry Park 201108 Shanghai, China Tel: +86 21 51089638 Fax: +86 21 64422195 Email: sales@wilsontool.cn
www.wilsontool.ro
Distribuitor:
Tel: 0040-331-401599 Tel/Fax: 0040-231-515702 Tel Mob: 0040-745-528494 E-mail: office (at) sm-tech.ro Web: www.sm-tech.ro www.wilsontool.ro
V stm la dispoziie cu plcere cu orice informaie sau ofert pentru scule Wilson Tool destinate mainii d-voastr de tantat CNC sau presei d-voastr abkant