Академический Документы
Профессиональный Документы
Культура Документы
a)Tri-folded unit b)Package part c)product arrange device The package has vacuum effect. 5.The whole electrical equipment system The Technology Process of Production Crushing fluff pulp-add strong absorbent powder-model shaping -put non-woven fabric on the bottom- put P.E.film on the top-spray glue-heat sealed sides-pree leading trough - put release paper on the top(spray bottm and winged adhesive)-cut and shape prducts-tri-folded vacuum package- output product in order9-A Winged Sanitary Napkin Line(super thin)
Z.Y.G998 SERIALS For Straight Sanitary Napkin and straight Diaper pad
Machinery Structure Pulp feeding frame: use the electrically controlled lifter, the feeding is easily operated by one people Pulp grinder: use the advanced grinding system with the reject fibre collecting device, which can reduce the production cost Pad wrapping system: use the pliable but strong wrapping and forming device made from the stainless steel with special specification and designs. Hot melt adhesive rolling system: use the special applying adhesive device, which is provided to apply pressure sensitive adhesive lines to the silicon release paper and is operated and maintained easily and simply . Pad conveyor: Convey the pads in 2.5M row, which is convenient for packing inspection drive system: use the most solid spiral gear and cylinda gear of different specification to match with 1:20 vary-speed gear shift allowing for reduction of the pulp mat to the proper thickness at the desired weight.
Z. Y. G --980 Small Size Panty Shield Napkin All Auto-control Production line
The specifications and the main parameter: 1) production speed: 150pcs/minute (including individual packing) 250pcs/minute(without individual packing) 2. Power: 380V 50HZ Power Capacity of the whole line :9KW The size of the equipment: (length X width X height): 4.7 X 1 M X 2.2M The Weight: 2.2 MT
COMPONENTS:
A. TWO ROLLER GEAR MILLS FOR GRINDING THE CELLULOSE PAPER WITH A WIDTH UP TO 500 MM. MADE OUT OF STEEL. WITH A PULP FEEDER OPERATED BY A VARIABLE SPEED MOTOR. B. DIAPER FORMING UNIT WITH DOUBLE PULP NUCLEUS, SUPER -ABSORBENTPOWDER APPLICATOR. C. ANATOMIC CUTTING GROUP FOR THE PULP D. EMBOSSING GROUP FOR A BETTER FIXATION OF THE PULP AND ADHESIVE APPLICATOR TO AVOID THE MOVEMENT OF THE DIAPER NUCLEUS. E. GROUP FOR THE FIXATION FOR THE POLYETHYLENE AND THE NONWOVEN. F. ELASTIC AND TAPES APPLICATOR. G. FINAL ANATOMIC DIAPER CUTTING GROUP. H. PLEATING, PRESSING AND FINAL CUTTING GROUP I. TAKE OUT AND STACKING GROUP. J. DIAPER PACKING TABLE - THE PRODUCTION CAPACITY IS ABOUT 60,000 DIAPERS IN 8 HOURS. - THE MAIN MOTOR OF THE MACHINE IS A VARIABLE SPEED OF 11.5 kW. - THE TOTAL POWER INSTALLED IS 60 kW. - THE USAGE OF COMPRESS AIR IS APPROX. 40 N/m3 HOUR AT A PRESSURE FROM 6-8 BARS. RAW MATERIALS: - CELLULOSE PULP ROLLS OF 500 MM. WIDE (25,4 CM) AND WITH A MAXIMUM DIAMETER OF 100 CM. -TISSUE PAPER ROLLS OF 27 CM. WIDE AND A MAXIMUM DIAMETER OF 80 CM. - NON WOVEN ROLLS 33 CM. WIDE AND A DIAMETER OF 80 CM MAXIMUM. - POLYETHYLENE ROLLS 33 CM WIDE AND A DIAMETER OF 80 CM MAXIMUM. - SIDE FASTENERS. - ELASTIC BAND. - ADHESIVE FOR THE SEALING AND THE ELASTICS. (under installation) - THIS MACHINE CAN BE ADAPTED TO PRODUCE SEVERAL SIZES: SMALL, MEDIUM, AND LARGE. SMALL = 400 MM LENGTH X 330 MM WIDTH MEDIUM = 440 MM LENGTH X 330 MM WIDTH LARGE = 480 MM LENGTH X 360 MM WIDTH (straight napkin)
Product Samples:
Super thin Wing Straight Napkin Pampers Straight diaper pad