Академический Документы
Профессиональный Документы
Культура Документы
Course Information Course Number/Section Course Title Term Days & Times Location
Nano 3302 Microscopy, Spectroscopy and Nanotech Instrumentation Fall 2011 Tuesday Thursday 10:00 11:15 am SLC 2.203 (Note: Class moved from CR 1.212)
Professor Contact Information Professor Amy Walker Office Phone 972 883 5780 Other Phone Email Address amy.walker@utdallas.edu Office Location NSERL 3.712 Office Hours TBA Other Information Course Pre-requisites, Co-requisites, and/or Other Restrictions Same as NANO 3301 (Introduction to Nanotechnology) Note: NANO3301 is NOT a pre-requisite. CHEM 1311 General Chemistry I MATH 2419/2415 Calculus II PHYS 2326/3342 Electromagnetism & Waves/Physics for Bio Science II Course Description Introduction to the techniques and methods common to the field of nanotechnology. Topics include Raman and UV-vis-NIR spectroscopy, surface spectroscopy, SEM, AFM, sputtering and evaporation coating, and handling nanomaterials for analysis. The course will cover basic methods for NEMS and other nanostructure fabrication such as deposition, oxidation, etching, implanting. Student Learning Objectives/Outcomes You will be expected to describe basic nanostructure fabrication techniques. For each characterization technique covered in this course, you will be expected to understand the following: 1) when to apply the technique 2) probe radiation 3) emitted radiation or particles 4) physics/chemistry of the absorption process 5) physics/chemistry of the emission process (where applicable) 6) production of the probe radiation 7) detection of the emitted radiation/particles 8) volume sampled by the technique 9) sensitivity of the technique 10) quantification of elements/species detected
Course Syllabus
Page 1
You will be expected to demonstrate what you have learned by problem solving in homework/exams and by giving a presentation to the class. Required Textbooks and Materials Required Texts Understanding Nanomaterials, M.S. Johal, CRC Press, ISBN: 978-1420073102 Suggested Course Materials Suggested Readings/Texts Fundamentals of Nanoscale Film Analysis, T.L.Alford, L.C.Feldman and J.W.Mayer, Springer ISBN 0-387-29260-8 (2007). Materials Characterization: Introduction to Microscopic and Spectroscopic Methods, Yang Leng, John Wiley & Sons, ISBN: 978-0-47-82298-2. Surface Analysis: The Principal Techniques, 2nd edition, J.C. Vickerman, I. S. Gilmore (eds.), John Wiley & Sons, ISBN: 978-0470017647 Information will also be provided on the e-learning web site and in class handouts. Assignments & Academic Calendar Topics, Reading Assignments, Due Dates, Exam Dates Week of August 25 30 September 06 13 20 27 October 04 11 18 20 25 November 01 08 15 22 24 29 December 06 Material Course Overview Why is Nano Different? Analysis Issues; Synthesis of Nanomaterials Nanomaterials Fabrication Processes Micromanufacturing Weighing Nanomaterials Quartz Crystal Microbalances Weighing Nanomaterials Secondary Ion Mass Spectrometry X-ray and Auger Photoelectron Spectroscopy Mid term Fluorescence Vibrational Spectroscopy Infrared and Raman Modeling Nanomaterials Vibrational Spectroscopy - Nonlinear Spectroscopic Methods Optical and Electron Microscopy Electron Microscopy; Scanning Probe Microscopy Thanksgiving Break Scanning Probe Microscopy/Presentations Scanning Probe Microscopy/Presentations
Course Syllabus
Page 2
Homework will be regularly assigned and solutions posted on the e-Learning web site one week later. Note: This is a tentative schedule and may be changed at the discretion of the faculty. Grading Policy Homework 20 %; mid term 30 %; presentation 20%; cumulative final 30 % Homework Assignments These are due no later than THE START OF CLASS. No exceptions. Assignments will be posted on the e-learning site for this course. Homework must be presented in a professional, legible manner to be graded. Exams Students may return exams having significant grading errors for reconsideration by the professor. A significant error constitutes a 3 point error on the grading of a single question. The professor will not view favorably regrade requests involving 1 or 2 points or minor errors in a series of several questions. Students must submit concise, clear explanations along with the exam to be regraded within 1 week after return of the exam. No markings or other alterations should be made to the exam. Acceptable explanations are 1) the answer key is incorrect or incomplete, 2) the student solution is equivalent or equally valid to that given on the key, and 3) the student gave the same answer on the key but was not recognized to have done so. To ensure fair and equal treatment to all students, all changes to the exam score must be made via this process. The professor will not meet with students to discuss the exam score changes. Course Policies Make-up exams No make up exams will be given except under extreme circumstances. Extra Credit Not offered. Late Work Not Accepted. Special Assignments None. Class Attendance Not required but is highly advised. Classroom Citizenship The Student Conduct and Discipline policy of the University of Texas at Dallas will be followed. Technical Support
If you experience any problems with your UTD account you may send an email to: assist@utdallas.edu or call the UTD Computer Helpdesk at 972-883-2911.
Course Syllabus
Page 3
available from the office of the school dean. Below is a description of any travel and/or riskrelated activity associated with this course.
Academic Integrity
The faculty expects from its students a high level of responsibility and academic honesty. Because the value of an academic degree depends upon the absolute integrity of the work done by the student for that degree, it is imperative that a student demonstrate a high standard of individual honor in his or her scholastic work. Scholastic Dishonesty, any student who commits an act of scholastic dishonesty is subject to discipline. Scholastic dishonesty includes but is not limited to cheating, plagiarism, collusion, the submission for credit of any work or materials that are attributable in whole or in part to another person, taking an examination for another person, any act designed to give unfair advantage to a student or the attempt to commit such acts. Plagiarism, especially from the web, from portions of papers for other classes, and from any other source is unacceptable and will be dealt with under the universitys policy on plagiarism (see general catalog for details). This course will use the resources of turnitin.com, which searches the web for possible plagiarism and is over 90% effective.
Copyright Notice
The copyright law of the United States (Title 17, United States Code) governs the making of photocopies or other reproductions of copyrighted materials, including music and software. Copying, displaying, reproducing, or distributing copyrighted works may infringe the copyright owners rights and such infringement is subject to appropriate disciplinary action as well as criminal penalties provided by federal law. Usage of such material is only appropriate when that usage constitutes fair use under the Copyright Act. As a UT Dallas student, you are required to follow the institutions copyright policy (Policy Memorandum 84-I.3-46). For more information about the fair use exemption, see http://www.utsystem.edu/ogc/intellectualproperty/copypol2.htm
Course Syllabus
Page 4
Email Use
The University of Texas at Dallas recognizes the value and efficiency of communication between faculty/staff and students through electronic mail. At the same time, email raises some issues concerning security and the identity of each individual in an email exchange. The university encourages all official student email correspondence be sent only to a students U.T. Dallas email address and that faculty and staff consider email from students official only if it originates from a UTD student account. This allows the university to maintain a high degree of confidence in the identity of all individual corresponding and the security of the transmitted information. UTD furnishes each student with a free email account that is to be used in all communication with university personnel. The Department of Information Resources at U.T. Dallas provides a method for students to have their U.T. Dallas mail forwarded to other accounts.
Disability Services
Course Syllabus
Page 5
The goal of Disability Services is to provide students with disabilities equal educational opportunities. Disability Services provides students with a documented letter to present to the faculty members to verify that the student has a disability and needs accommodations. This letter should be presented to the instructor in each course at the beginning of the semester and accommodations needed should be discussed at that time. It is the students responsibility to notify his or her professors of the need for accommodation. If accommodations are granted for testing accommodations, the student should remind the instructor five days before the exam of any testing accommodations that will be needed. Disability Services is located in Room 1.610 in the Student Union. Office hours are Monday Thursday, 8:30 a.m. to 6:30 p.m., and Friday 8:30 a.m. to 5:00 p.m. You may reach Disability Services at (972) 883-2098. Guidelines for documentation are located on the Disability Services website at http://www.utdallas.edu/disability/documentation/index.html
These descriptions and timelines are subject to change at the discretion of the Professor. The instructor may change material, course content, and course pace or item sequence at any time.
Course Syllabus
Page 6