Академический Документы
Профессиональный Документы
Культура Документы
Standard: GB / T 699-1988 Characteristics and application: Higher strength steel than 15, very few quenching, no temper brittleness. Cold plastic deformation of high, normal for bending, rolling, curved edges and hammer arch and other processing, and contact welding arc welding performance is good, when welding small thickness, shape or form demanding complex workpieces on the crack-prone. Cutting of cold-drawn or annealed state than normalizing condition is good, generally used in the manufacture Shouli Bu large and require high toughness. Chemical Composition: Carbon C: 0.17 ~ 0.24 "Silicon Si: 0.17 ~ 0.37 Manganese Mn: 0.35 ~ 0.65 S S: 0.035 P P: 0.035 Cr Cr: 0.25 Ni-Ni: 0.25 Cu Cu: 0.25 Mechanical Properties: Tensile strength b (MPa): 410 (42) yield strength s (MPa): 245 (25) elongation 5 (%): 25 section shrinkage (%): 5, hardness: no heat treatment , 156HB, sample size: the sample size of 25mm Heat treatment and microstructure specifications: Heat treatment specifications: normalizing, 910 , air cooling. Microstructure: ferrite + pearlite. Delivery Status: in order to not heat or heat treatment (annealing, normalizing or tempering) the state of delivery. Required heat treatment delivery should be specified in the contract, did not specify who delivered by non-heat treatment
Standard: ASTM A106 Seamless carbon steel pipes for high-temperature service Application: Size(mm): For high temperature service O.D.: 6.0323.0 W.T.: 130 L: max 12000
Grade and Chemical Composition () Grade A B C C 0.25 0.30 0.35 Mn 0.27-0.93 0.29-1.06 0.29-1.06 P 0.035 0.035 0.035 S 0.035 0.035 0.035 Si 0.10 0.10 0.10 Cr 0.40 0.40 0.40 Cu 0.40 0.40 0.40 Mo 0.15 0.15 0.15 Ni 0.40 0.40 0.40 V 0.08 0.08 0.08
Mechanical Properties Rm Mpa Tensile Strength 330 Mpa Yield Point 205 Elongation 20 Delivery Condition Annealed
Grade A
B C
415 485
240 275
20 20
Annealed Annealed
Dimension Tolerances Pipe Type OD Cold Drawn Pipe Sizes 48.3mm 60.3mm WT Tolerances 0.40mm 1mm 12.5