Академический Документы
Профессиональный Документы
Культура Документы
Fail-safe spring
High Thrust Cylinder Actuator Three standard sizes cover most applications. Each is easily reversible and features exceptional stiffness, repeatability and low hysteresis
Heavy Guiding Two widely spaced guides on large-diameter stem. Plug does not guide in retainer
Versatility ANSI Class 600 (PN 100) body used for ANSI Class 150, 300 and 600 (PN 16, 40, 100) ratings through 4-inch (DN 100)
Clamped-in Seat Ring Valve may be disassembled quickly and easily by removing bonnet bolts
The Valtek Mark OneTM globe control valve offers superior performance in liquid and gaseous services, while also permitting easy, fast and inexpensive maintenance. The spring-cylinder actuated Mark One valve provides stiffness and maintains high positioning accuracy, repeatability, controlled high speed, and faithful response. The Mark One valve handles up to 150 psig (10.3 barg) supply air and has the thrust to shut off against much higher fluid pressures. The Mark One valve is designed so the spring, supply air pressure and fluid pressure itself combine to produce exceptionally tight shutoff. A self-aligning seat ring further enhances the shutoff capability of the Mark One valve.
The Mark One valve is typically double top-stem guided and completely avoids contact between the plug and seat retainer. Many globe valve maintenance problems can be traced to cage-guiding. The close metal-tometal contact between the cage and plug often result in galling and sticking. The clamped-in seat and top-entry trim permits easy, quick maintenance. Plus, with the Mark One valves high degree of parts interchangeability, fewer inventory parts are required. In addition, the actuator is lighter, smaller and easier to handle than comparable diaphragm actuators. The Valtek Mark One control valve is the industry choice for a simple, reliable, tough globe valve.
Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611
Versatile
Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611
Stroke Plate
Yoke
Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611
Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611
Valtek Mark One Control Valves End Connections, Flanges and Bolting
Mark One body facings come standard as raised face for either separable and integral flanges. To achieve better sealing with mating piping, the flange face is machined with spiral grooved serration. Other optional facings include smooth face, flat face, ring-joint, large and small tongue, and large and small groove.
Bonnet Flange
Bonnet Flange
The bonnet flange incorporates the same separable design as the end flanges and is normally manufactured in carbon steel; however, it can be specified in stainless steel when required.
0.5-48 15-1200 0.5-48 15-1200 0.5-24 15-600 0.5-2 0.5-2 0.5-4 0.5-4 0.5-4 6-36 15-50 15-50 15-50 15-50 15-100 150-900
900-2500 160-400 150-600 150-600 150-600 150-600 16-100 16-100 16-100 16-100
S75.12
Buttweld
0.5-24 15-600
900-2500 160-400
Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611
Gasket Material PTFE 304 S.S./AFG 316 S.S./AFG AFG KEL-F FEP Graphite** 316 S.S./Graphite** Inconel X-750
Maximum Gasket Temp. F C 350 177 750 1000 600 350 400 1500** 1500** 1500 400 538 318 177 204 816** 816** 816
Minimum Gasket Temp. F C -200 -130 -20 -20 -20 -320* -320 -320 -320 -20* -30 -30 -30 -196* -196 -196 -196 -30*
Yoke Clamps
The actuator is typically attached to the Mark One body assembly with two precision-cast, stainless steel yoke clamps. In some cases, however, the actuator is bolted directly to the bonnet. Each clamp has an inclined plane surface which, when bolted together, securely fastens the actuator yoke to the bonnet. Unlike conventional threaded clamps, the clamp design permits easy removal even under extremely corrosive conditions. Associated bolts and locknuts are supplied in plated carbon steel, although stainless steel is also available when required.
Yoke Clamp
Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611
Standard Bonnet
Extended Bonnet
Extended Bonnet
The extended bonnet protects the packing from excessive heat or cold, which may inhibit valve performance. The bonnet is constructed of carbon steel for temperatures from -20 to 800 F (-30 to 427 C) and of 304 or 316 stainless steel for -150 to 1500 F (-100 to 816 C).
Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611
Table 3: Guides
Standard Materials Graphite-lined SS*** Glass-filled PTFE-lined S.S. 350 F -423 F 177 C -253 C Solid Bronze Solid Alloy 6 500 F -423 F 260 C -253 C 1500 F -423 F 816 C -253 C Max. Temp. Min. Temp. Maximum Pressure
1500 F -320 F 1400 psig / 96.6 barg up to 2-in / DN 50 816 C -196 C 1000 psig / 69.0 barg 3-4-in / DN 80-100 850 psig / 58.6 barg 6-in DN 150 & up 150 psig / 10.3 barg @100 F / 38 C 100 psig / 6.9 barg @ 350 F / 177 C Same as body Same as body
Table 4: Packing
Bonnet Type Standard** Bonnet Packing Material PTFE, PTFE/AFP and Glass-filled PTFE Graphite/AFP Graphite/AFP, Inconel wire Graphite*** PTFE, PTFE/AFP and Glass-filled PTFE Graphite/AFP Graphite/AFP, Inconel wire Service Fluid Temperature Limitation 500 F 500 F 750 F 750 F* 750 F* 600 F 1200 F 1200 F 1500 F -320 F -423 F 260 C 260 C 400 C 400 C* 400 C* 316 C 650 C 650 C 816 C -196 C -253 C
Lower Guide
Extended** Bonnet
Graphite*** Cryogenic Extended Length** 15, 18-inch (38, 46 cm) 24, 27-inch (38, 46 cm) PTFE PTFE
Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611
50
% Flow
Equal Percentage
100
50 % Valve Stroke
IC RIST CTE ARA CH TIC D RIS LE L TE C RA HA TC EN ER H IN
ST
IC
100
Linear
% Flow
Linear inherent characteristic produces equal changes in flow per unit of valve stroke regardless of plug position. Linear plugs are used on those systems where the valve pressure drop is a major portion of the total system pressure drop.
Linear
50
TY PI CA L
IN ST A
50 % Valve Stroke
TIC TERIS ARAC NT CH E INHER
100
100
Quick-open
% Flow
Quick-open plugs are used for on-off service and are primarily designed to produce maximum flow quickly.
50
Quick-open
50 % Valve Stroke
100
Full Area
Reduced
Intergral
10
Sleeve Gasket
Pressurebalanced Sleeve
Soft Seats
The Mark One soft seat is used in applications requiring ANSI Class VI 'bubble-tight' shutoff. Its design consists of an elastomer sandwiched between two metal pieces. The assembled soft seat is interchangeable with the hard seat for a given size and pressure rating. Inserts are often constructed of PTFE; therefore, maximum temperature should be below 300 F (150 C) at 290 psig (20 barg). For temperatures below -85 F (-65 C), PTFE soft seats can be used in high-pressure applications.
Metal Seats
Metal seated valves handle Class IV shutoff (ANSI B16.104, 1976 FCI 70-2). This class calls for maximum permissible seat leakage of 0.01 percent of rated valve capacity. All Valtek control valves are seat-leak tested after assembly and are substantially lower in leakage than called for by this class. This exceptional seat tightness is obtained by aligning the seat ring with the plug during assembly. Additional seat tightness using metal seats is available as an option.
Insert Retainer
Insert
Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611
1.5
40
50
80
100
150
200
10
250
12 14
300 350
* Minimum standard actuator size. Oversized actuators may be required for large pressure drops.
12
Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611
in. DN ANSI PN 2 50 600 100 1500 250 2500 400 600 100 1500 250 2500 400
in2 0.26 0.09 0.07 0.76 0.48 0.12 1.19 0.80 0.37
cm2 1.7 0.6 0.5 4.9 3.1 0.8 7.7 5.2 2.4
in2 0.51 0.34 0.32 1.36 1.08 0.72 1.79 1.79 1.36 3.06 4.13 3.06 2.46 5.10 5.10 4.13 8.09 8.09 6.44
cm2 3.3 2.2 2.1 8.8 7.0 4.6 11.5 11.5 8.8 19.7 26.6 19.7 15.9 32.9 32.9 26.6 52.2 52.2 41.6 75.1 55.8 41.8 86.5 71.1 57.0
Std. Actuator Stroke Size** in. cm 25 50 50 50 100 100 50 100 100 50 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 1 1 1 1.5 2 1.5 2 2 2 2.5 2.5 2.5 2.5 3 4 3 3 4 4 4 4 4 8 8 8 8 8 3 3 3 4 5 4 5 5 5 6 6 6 6 19 26 19 19 26 26 26 26 26 52 52 52 52 52
3.63 0.25 3.63 0.25 3.63 0.25 5.65 0.60 5.65 0.60 5.65 0.60 5.65 0.60 7.26 0.99 7.26 0.99 7.26 9.70 9.70 9.70
80
600 100 4 100 1500 250 2500 400 6 150 150 600 1500 2500 16 100 250 400
19.63 126.7 19.63 126.7 19.63 126.7 12.57 81.1 30.68 197.9 30.68 197.9 19.63 126.7 50.27 324.3 50.27 324.3 30.68 197.9 70.88 457.3 70.88 457.3 50.27 324.3 95.03 613.1 95.03 613.1 95.03 613.1
22.69 146.4 23.76 153.3 22.69 146.4 15.03 97.0 35.78 230.9 35.78 230.9 23.76 153.3 58.36 376.5 58.36 376.5 37.12 239.5 82.52 532.4 79.53 513.1 56.75 366.2
2.06 13.3 2.36 15.2 1.29 8.3 0.69 4.4 3.33 21.5 1.96 12.6 0.99 6.4 4.95 31.9 3.18 20.5 1.53 9.9
600 100 8 200 1500 250 2500 400 600 100 10 250 1500 250 2500 400 600 100 12 300 1500 250 2500 400 14 350 16 400
6.25 15.9 6.25 15.9 5.00 13.0 8.00 20.0 8.00 20.0 6.25 15.9 9.50 24.0 9.50 24.0 8.00 20.0
9.70 1.77 11.40 13.00 3.14 20.30 13.00 3.14 20.30 13.00 3.14 20.30 16.00 4.91 31.70 16.00 4.91 31.70 16.00 4.91 31.70 16.00 4.91 31.70 16.00 4.91 31.70
6.73 43.4 11.64 3.74 24.1 8.65 1.57 10.1 6.48 8.49 54.8 13.40 3.95 25.5 11.02 1.77 11.4 8.84
150 16 11.00 28.0 600 100 11.00 28.0 1500 250 11.00 28.0
16.00 4.91 31.70 108.43 699.6 19.00 7.07 45.60 106.05 684.2 19.00 7.07 45.60 103.87 670.2
600 100 12.75 32.4 127.68 823.8 1500 250 12.75 32.4 127.68 823.8
19.00 7.07 45.60 148.49 958.1 13.74 88.7 20.81 134.3 19.00 7.07 45.60 140.61 907.2 5.86 37.8 12.93 83.4
* This data does not apply to ChannelStream or MegaStream trim. ** Minimum standard actuator size. Oversized actuators may be required for large pressure drops.
Seat Surface
Full Bore
CV Data
Use Performance! valve sizing software for CV data according to trim characteristic, body rating, and flow direction.
13
Valtek Mark One Control Valves Standard Materials of Construction, Estimated Shipping Weights
Table 9: Body Materials
Sizes 0.5 48-inch (DN 15 1200); Class 150 600 (PN 16 100) 0.5 24-inch (DN 15 600); Class 900 2500 (PN 160 400) 0.5 12-inch (DN 15 300); Class 4500 (PN 700) Forms Globe, angle, three-way ANSI Ratings Class 150, 300, 600, 900, 1500, 2500 (PN 16, 40, 100, 160, 250, 400) Materials Carbon steel, stainless steel, Monel, nickel, chrome-moly, Titanium, Alloy 20, bronze, Hastelloy B, Hastelloy C, other castable materials End Separable flange: Connections 0.5 4-inch (DN 15 100); Class 150 600 (PN 16 100) Integral flange: all sizes NPT: 0.5 2-inch (DN 15 50) Socketweld: 0.5 4-inch (DN 15 100) Grayloc: all sizes Separable Carbon steel, 316 stainless steel; End Flange other material as required Types
Flange Materials
Name plate
Valves are equipped with stainless steel name plates. An example is illustrated below.
Flowserve Corporation
S/N ________________ MARK _____ SIZE _____ CLASS _________ T/N _________ Cv _________ CHAR _________ AIR TO ______________ SIGNAL _________________ BODY _______________ TRIM ___________________ TAG ____________________________________________________ P.O. ____________________________________________________
Part Identification
Nearly every part on a Valtek control valve has an identification number, along with material code number. For example, on the plug stem flats, the trim number and flow characteristic of the plug are identified.
227 15 427 20
265 120
600 272 1000 454 1170 531 1400 830 377 1100 499 1320 599 1740
636 40 18 790 65 30
250 1050 477 1405 638 1600 726 2050 931 2200 999 2600 1180 90 41
14
Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611
55211
Lubrication (optional)
Auxiliary
Materials
Action
Hard Facings
Materials: Alloy 6, No.5 Colmonoy Types: seat surface, full contour, full bore, lower stem guide area PTFE, FEP, KEL-F, polyurethane, PEEK Sizes: 2-inch (DN 50) and larger, Seal types: elastomer, metal
Max. Working 150 psig (10.3 barg) (Refer to Pressure IOM 2 for pressure limitations)
Input Signals Pneumatic: 3-15, 3-9, 9-15, 6-30 psig (0-1, 0-0.6, 0.6-1, 0.4-2.1 barg) and split ranges Electro-pneumatic: 4-20, 10-50 mA Supply Pressure Standard Materials Adjustments Action 40-150 psig (2.8-10.3 barg) (no supply regulator required) Aluminum, stainless steel, nitrile, nickel-plated brass Stroke range, zero, balance pressure Air-to-open, air-to-close (field reversible)
Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611
15
MATCH LINE
B A A
Table 19: Globe Body Dimensions ANSI Class 150, 300, 600 (inches / mm)
A
Body Size inch 1 1.5 2 3 4 6 6 8 8 10 10 12 12 DN 25 40 50 80 100 150 150 200 200 250 250 300 300 29.0 737 30.5 775 32.3 819 26.5 673 27.9 708 29.6 752 21.4 543 22.4 568 24.0 610 Sep. Flange* Class 150-600 PN 16-100 8.5 8.5 9.5 11.5 14.0 17.0 216 216 241 292 356 432 Class 150 PN 16 7.3 7.3 8.8 10.0 11.8 13.9 17.8 184 184 222 254 298 353 451 18.6 473 20.0 508 Integral Flange** Class 300 PN 40 7.6 7.8 9.3 10.5 12.5 14.5 194 197 235 267 318 368 Class 600 PN 100 8.1 8.3 9.9 11.3 13.3 15.5 206 210 251 286 337 394 1.5 1.8 2.3 2.3 3.4 5.2 5.5 5.8 7.1 7.5 8.4 8.9 9.6 38 44 59 57 86 133 139 146 180 190 214 227 243 Standard Bonnet 3.8 3.8 5.2 5.4 6.8 8.4 10.1 12.3 12.5 14.4 14.1 14.1 14.1 16.3 97 97 132 138 172 214 256 311 318 365 359 359 359 413 Extended Bonnet 8.3 8.3 9.7 9.9 12.3 13.9 15.6 17.8 18.0 19.9 19.6 20.6 19.6 22.8 212 212 246 252 312 354 395 451 457 505 498 524 498 578
Clearance Above Actuator Required for Disassembly 2.5 2.5 4.0 4.5 5.8 7.5 10.0 10.0 10.9 11.4 11.9 12.1 12.6 12.6 64 64 102 114 147 190 254 254 277 290 302 308 320 320
Table 20: Globe Body Dimensions ANSI Class 900, 1500, 2500 (inches / mm)
Body Size in DN 1 1.5 2 3 4 6 8 Clearance Required A B H for Disassembly Face-to-Face Standard Bonnet Extended Bonnet ANSI Class ANSI Class ANSI Class ANSI Class ANSI Class ANSI Class ANSI Class ANSI Class ANSI Class ANSI Class 900-1500 2500 1500 2500 900-1500 2500 900-1500 2500 900-1500 2500 PN 160-250 PN 400 PN 250 PN 400 PN 160-250 PN 400 PN 160-250 PN 400 PN 160-250 PN 400 279 330 375 460 530 7622 832 991 1130 1257 12.02 15.0 15.8 26.0
1 1
25 11.0 40 13.0 50 14.8 80 18.1 100 20.9 150 30.02 200 32.8
44 68 71
44 60 77
143 220 220 289 316 493 473 556 675 629
6.8 173 8.7 221 8.7 221 12.9 328 14.6 371 17.4 442 24.3 616 26.0 660 28.0 711
10.1 13.2 13.2 18.4 19.4 26.4 24.2 28.9 33.6 31.8
257 334 334 467 496 671 613 734 852 806
11.3 286 13.2 334 13.2 334 19.9 506 21.6 549
3.6
90
5.6 141 6.1 154 8.3 211 10.7 272 13.6 344 17.8 451 19.5 495 20.5 521
2.8
4.2 106
94 11.4
29.01 34.01
27.3 692 12.2 31.3 794 16.7 33.0 838 18.3 35.0 889 19.4 20.5
9.4 240 10.3 262 18.6 11.2 284 10.0 254 21.9 14.0 356 12.9 327 26.6 24.8
ANSI / ISA S75.15, latest edition; (1) Per ANSI / ISA S75.16, latest edition; (2) Valtek standard
16
Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611
Body Rating ANSI Class 150-600 150-600 150-600 150-600 150-600 150 PN 16-100 16-100 16-100 16-100 16-100 16 15.0 15.0 15.3 18.0 18.0 18.0 381 381 387 457 457 457
H
Standard Cold Box Extension 24.0 24.0 24.3 24.0 24.0 24.0 610 610 616 610 610 610 27.0 27.0 27.3 27.0 27.0 27.0 686 686 692 686 686 686
H
Standard Bonnet Extended Bonnet 7.6 8.1 8.4 10.4 11.7 12.6 15.0 14.5 16.3 9.2 10.3 11.0 11.5 11.6 12.4 16.8 18.2 18.1 19.6 20.3 23.1 21.5 27.8 22.6 28.1 192 206 214 264 295 320 381 368 414 234 262 279 292 295 315 427 462 460 498 516 537 547 706 574 714
PN 16-100 16-100 16-100 16-100 16-100 16 40-100 16 40-100 160-250 400 160-250 400 160-250 400 160-250 400 160-250 400 160-250 400 160-250 400 160-250 400 4.3 4.8 5.8 7.0 8.8 8.9 11.0 13.0 13.0 5.5 6.0 6.5 7.5 7.3 8.9 9.3 13.0 12.5 14.5 13.9 17.0 16.4 20.1 19.5 25.0 108 121 146 178 222 226 279 330 330 140 152 165 191 185 226 236 330 318 368 353 432 417 511 495 635
Clearance Required for Disassembly 2.5 4.0 4.5 5.8 7.5 10.0 10.0 13.8 13.8 3.6 3.6 5.6 5.6 6.1 6.1 8.4 8.3 9.7 10.7 12.2 13.6 16.7 17.8 18.3 16.3 64 102 114 147 190 254 254 349 349 90 90 142 142 155 155 213 211 246 272 310 345 424 452 465 414
0.5-1 15-25
3.1 3.6
78 92
3.9 100 4.9 124 6.2 156 7.1 180 9.5 241 9.0 229 10.8 275 4.7 119 5.8 147 6.5 165 7.0 178 7.1 180 7.9 201 9.8 249 11.2 284 11.1 282 12.6 320 13.3 338 16.1 409 14.5 368 20.8 528 15.6 396 21.1 536
150 300-600
H
0.5-1 15-25 1.5 40 50 80 100 150 200 250 900-1500 2500 900-1500 2500 2 3 4 6 8 10 900-1500 2500 900-1500 2500 900-1500 2500 900-1500 2500 900-1500 2500 900-1500 2500
Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611
17
MATCH LINE
H C
H
Standard Extended Bonnet Bonnet Clearance Required for Disassembly 3.4 3.4 5.0 5.5 7.1 9.4 86 86 127 140 181 240 294 294 310 310
38 44 59 59 86 133
3.4 3.4
87 87
4.3 108 4.3 108 4.8 121 5.8 146 7.0 178 8.5 216 8.9 226
6.7 170 11.2 284 6.7 170 11.2 284 9.1 230 13.4 341 9.3 236 13.7 347 13.0 329 18.5 470 16.7 423 22.1 562
10.0 254 10.5 267 11.3 11.8 298 12.5 318 13.3 13.9 353 14.5 368 15.5 17.8 451
21.6 548 26.6 675 11.6 25.8 654 31.3 794 11.6 23.9 608 29.4 748 12.2 30.2 767 35.7 907 12.2
146 16.0 406 10.0 254 179 15.0 381 10.7 272 191 18.3 464 12.0 305
18
Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611
A 4-inch Mark One with side-mounted handwheel operates in a boiler feedwater system at a pulp plant. This 2-inch Guardian II operates in a chemical plant.
This 8-inch, back-pressure control valve operates in a liquid hydrocarbon plant with a 580 psi / 40 bar upstream pressure. This cryogenic Mark One is used for aerospace testing as an O2 vent valve. (Right) A liquid nitrogen loading facility in Austraila uses two Mark One valves for its emergency fire water system.
Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611
19
Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly selected, this Flowserve product is designed to perform its intended function safely during its useful life. However, the purchaser or user of Flowserve products should be aware that Flowserve products might be used in numerous applications under a wide variety of industrial service conditions. Although Flowserve can (and often does) provide general guidelines, it cannot provide specific data and warnings for all possible applications. The purchaser/user must therefore assume the ultimate responsibility for the proper sizing and selection, installation, operation and maintenance of Flowserve products. The purchaser/user should read and understand the Installation Operation Maintenance (IOM) instructions included with the product, and train its employees and contractors in the safe use of Flowserve products in connection with the specific application. While the information and specifications presented in this literature are believed to be accurate, they are supplied for informative purposes only and should not be considered certified or as a guarantee of satisfactory results by reliance thereon. Nothing contained herein is to be construed as a warranty or guarantee, express or implied, regarding any matter with respect to this product. Because Flowserve is continually improving and upgrading its product design, the specifications, dimensions and information contained herein are subject to change without notice. Should any question arise concerning these provisions, the purchaser/user should contact Flowserve Corporation at any of its worldwide operations or offices. All trademarks and tradenames shown in this literature are property of their respective owners.
For more information about Flowserve and its products, contact www.flowserve.com or call USA 972 443 6500 Manufacturing Facilities 1350 N. Mt. Springs Prkwy. Springville, UT 84663 Phone 801 489 8611 Facsimile 801 489 3719 Manderscheidstr. 19 45141 Essen, Germany Telephone (49) 2 01 89 19 5 Facsimile (49) 2 01 891 9600 Alle du Quartz 1 CH-2300 La Chaux-de-Fonds Switzerland Telephone (41) 32 925 9700 Facsimile (41) 32 926 5422 12, av. du Qubec, B.P. 645 91965, Courtaboeuf Cedex, France Telephone (33 1) 60 92 32 51 Facsimile (33 1) 60 92 32 99 Quick Response Centers 5114 Railroad Street Deer Park, TX 77536 USA Telephone 281 479 9500 Facsimile 281 479 8511 104 Chelsea Parkway Boothwyn, PA 19061 USA Telephone 610 497 8600 Facsimile 610 497 6680 1300 Parkway View Drive Pittsburgh, PA 15205 USA Telephone 412 787 8803 Facsimile 412 787 1944
FCD VLATB001-29 20
2000 Flowserve Corporation. Flowserve Flowserve Corporation, Valtek Control Tel. USA 801 489 8611 489 8611 Corporation, Valtek Control Products, Products, Tel. USA 801