Академический Документы
Профессиональный Документы
Культура Документы
29
32
28
27
26 31
7
9 24 25
10
11 23
12
13 30
14
15
22
21
16
17
18
19
20
Moment of inertia
Objective: To investigate the effects of mass, distribution, radius of gyration and acceleration on the moment of inertia. 1. To show that as the disc mass varies so does the acceleration. 2. To determine the radius of gyration of the two arm boss unit. 3. To determine the effective radius of gyration of inertia. 4. To show that if the mass is kept constant but its distribution varies then the acceleration caries.
Toggle joint
Objective: The purpose of this experiment is to compare the results with the theoretical values given by a velocity diagram and to study the variation in the mechanical advantage as the angle of the toggle bars changes.
Roof truss
Objective: Experimentally measure the forces in a loaded frame and then compare them with values calculated from theory.
Redundant truss
Objective: To measure the forces in a truss before & after redundant member is present.
Fly wheel
Objective: To determine the moment of inertia of the fly wheel the friction and windage and the time taken to come rest.
Portal frame
Objective: To analyses a given loading arrangement on portal frames and compares the results.
Force triangle
Objective: 1. To show that a system of co-planer force when in equilibrium have a closed vector diagram. 2. The resolution of forces and vector force diagram are often used in engineering to find a solution may be difficult or complex due to the geometry involved.
Coefficient of Friction
Objective: To determine the kinetic coefficient of friction between various metal pairs.
Ackerman Steering
Objective: To measure wheel angles and steering arm position and to determine the turning centre. The effect of toe-out and toe-in of the may also be shown.