Академический Документы
Профессиональный Документы
Культура Документы
10 cm
5 cm
Installation instruction
www.akasa.com.tw
21Function Panel Multi Memory Card Reader Multi Port Access Manual / Auto Smart Fan Control
C copyright 2005. All rights reserved. Akasa, the Akasa logo and other Akasa marks are owned by the Akasa Group of companies and may be registered.
Made in China
www.akasa.com.tw
Installation components
English
Installation instruction
Mic cable x1
Audio cable x1
PCI backplate x1
Cable ties x3
Specification
Fan connection spec 3 pin fan connector RPM display RPM adjustment Alarm RPM adjustment Temp adjustment Temp display Presetting alarm value Auto indicator function 12V DC, max 18watt per channel 2 male connectors 0000 ~ 9990 RPM 6 V ~ 12 V ( step 1V) 500 ~ 2000 RPM ( step 100 RPM) 5C / 9F 0 ~ 90.0 C / 32 ~194 F 800 RPM / 50 C (122 F) 45 C / 113 F = 7 V 55 C / 131 F = 10 V 65 C / 149 F = 12 V DC Input I/O ports Memory card type +5V / +12V , USB bus power USB2.0 * 2 / 1394 *1 / SATA 15+7 PIN *1 / RCA *1 / Audio in & out / Mic in CF I, CF II, Microdrive, SM, SD, miniSD(adapter), MMC, RS MMC(adapter), MS, MS MagicGate, MS PRO, MS Pro MagicGate, MS Duo(adapter), MS Duo MagicGate(adapter), MS Pro Duo(adapter), MS Pro Duo MagicGate(adapter), MS Pro Ultra II, MS ROM, MS Select, T-Flash(adapter) Interface of reader OS USB 2.0 Win 98SE / ME / 2000 / XP / x64
o o o o o o o o o o o o
Fan cable x2
Power connector x1
Temperature sensor x2
www.akasa.com.tw
Front panel
Multi Format Memory Card Reader
4-Slots, Memory Card Reader
Audio Panel
Audio I / O port E
IEEE1394
SATA Power
USB line
B or O (Internal)
Video I / O
Fan 1 connector J
1394 line
C or N (Internal)
nHi-Speed USB 2.0 card reader backwards compatible with all USB 1.1 ports nAll 4 memory-slots are active, which allows you to copy data between the different memory cards at the same time nUSB Mass Storage Class Device nMax Speed will be up to 480Mbit / sec nPlug & play and Hot Swapable nLED Indication for Power & Access
nUSB 2.0 *2 n1394a *1 nSA 15 pin + 7 pin TA nRCA for Video in or Video out nAudio line in and out nMic line in
www.akasa.com.tw
2) Insert all cables into the empty drive bay. Push the allinone into the bay until it is flush with the chassis front panel, the screw holes should align with the chassis drive bay holes.
2) Connect the other end of cable K to the fan headers on the M/B.
3) Secure the Allinone with screws of I . 3) Connect P to the temperature sersor cable connector from the allinone panel. Use the adhesive tape to stick the temperature sensor probe of P in the appropriate location. CAUTION : In auto mode, the fan speed will be controlled automatically, please place the sensors in the appropriate position. NOTE : Do not place the sensor between the heatsink base and the CPU surface. Place the sensor on the side of the heatsink near the base.
www.akasa.com.tw
1) Connect the SATA cable A to the SATA pin header on the M/B. Connect the SATA power cable K connector to the PSU 4-pin connector.
2) Connect the card reader USB cable and the internal USB cable O to the USB pin header on the motherboard. And connect the internal 1394 cable N to the 1394 pin header on the motherboard. (Please find more information on your motherboard manual). NOTE : NEVER connect USB cable to any of the IEEE 1394 M/B connector. Doing so will damage the motherboard. NEVER connect IEEE1394 cable to any of the USB M/B connector. Doing so will damage the motherboard. Internal USB and IEEE 1349 connection
VCC
USB
D-
D+
GND
GND
1394
www.akasa.com.tw
LCD Instroduction
Fan speed display Setting mode indicator Mode switch indicator
Uninstall Driver
1) Please run the setup process again to uninstall the driver. 2) Follow the on-screen instruction to complete the process. 3) System would ask you to restart the computer, please choose Yes, I want to restart my computer now restart your PC, the uninstall will be completed.
Fan working display Temperature display Fan speed display Fan reading indicator
Remove Device
For Windows 98SE Users nBefore you remove your flash cards or reader please wait for reader to stop accessing data on the , flash card to prevent data loss. For Windows ME/2000/XP/x64 Users nPlease double click the icon on the system tray A dialog box will appear. . nDouble click the Generic USB Storage Device to remove the device or cards, this prevents data loss.
Back light red, fan speed blinking and alarm sound Fan speed too low or fan faillure. (The alram will stop after 25 sec. but back light will stay red and fan speed will blink until the problem is fixed.)
Back light red, temperature blinking and alarm sound T emperature higher than the temperature setting. (The alarm will stop after 25 sec. but back light will stay red and fan speed will blink until the temperature is lower than the temperature set).
10
www.akasa.com.tw
Manual Mode
nPress nPress
BT1
BT3
nPress
reset mode
Alarm Setup
1) Press 2) Press 3) Press , for 2 sec setup mode enabled.
BT4
BT2
4) Press
Auto Mode
1) Press
Function Button
for 2 sec setup mode enabled. 5 times "Auto" displayed. for 2 sec exit setup mode and save.
Setup Mode Press for 2 sec to enter or exit setup mode Fan1 / Temp1 / Fan2 / Temp2 / Auto selection Increase value ( RPM unit :100 RPM Temp unit : 5oC ) Decrease value ( RPM unit :100 RPM Temp unit : 5oC )
2) Press 3) Press
BT1 BT2
C /
Fan1,temp1 / fan2,temp2
The fan speed is controlled by the default temperature setting, where: temperature of the sensor 45oC / 113oF 55oC / 131oF 65oC / 149oF voltage output for the fan 7V 10V 12V
BT3 BT4
NOTE : the temperature alarm setting for each thermal sensor is set manually.
11
12
www.akasa.com.tw