Академический Документы
Профессиональный Документы
Культура Документы
Low
Low
Low
Wireline cable is damage or broken while in hole. Master or crown valve closed while in hole
Wireline cable parts causing possible personnel injury. Caliper and wireline lost downhole
High
Low
Low
Possible injury to personnel. Loss of tools and /or damage to wireline cable
High
Low
Low
Damage caliper tool Injury to personnel string while rigging and equipment up or rigging down
Low
Low
Low
Low
Low
Low
Good communication established with all key Low personnel prior too and during wireline operation. Power pack maintenance perform before all operations. Low Visual inspection perform during operations All tools and equipment to perform caliper Low operation to be check prior to load out to well site.
Low
Low
Low
Loss of caliper tool string in hole create fishing operation. Broken cable causes injury
Med
Low
Caliper damage, Caliper tool string failure or loss due to lost or operation debris left in hole delay due to after milling hazard's downhole operations Caliper tool string lost or damage due to in-accurate depth correlation.
Med
Low
Low
Low
Ensure weight indicator is functioning effectively. All potential hang up areas are Low minimized and well documented. Cable head built to proper pull out or weak point Survey to be carried out with potential Low hazards in mind. Logging speed >TBD ft/min. Check depth system prior to running in hole. Ensure mechanical Low back-up working properly. Correlate with known tubulars, casing collars or BHA
Low
Low
Low
10
Med
Low
11
Steam comes out from Lubricator and possible with H2S gas
Low
Low
Correct lifting techniques to be used, Low crane to be used for heavy and awkward lifts. Check rubber packer before usage. Service BOP for every run. If rubber packer swell during operation and Low more steam comes out, use pack-off pump to squeeze the rubber and diminish rubber packer wireline hole.
Low
Low