Академический Документы
Профессиональный Документы
Культура Документы
! Please ensure the phone is placed in a dry and ventilated place without corrosive air.
Please install 3 x AA batteries for viewing the LCD display. If the LCD does not display
clearly, please change the batteries to ensure the normal function of the unit.
Before operation, please check if you had applied for caller ID service from Telecom for
caller ID display. Please remove any branch box or abuse resistant device to avoid
failure in receiving incoming call number.
FEATURES:
• FSK / DTMF Caller ID receiving, auto detecting
• 16 digits display, and two LCD display modes:
• Line 1:20 incoming call memories, 5 outgoing call memories and 20 VIP numbers setting
• Line 2: 20 incoming call memories and 5 outgoing call memories
• 12 two-touch memories(16 digit)
• 3 one-touch memories
• Line 1: 32 digits Auto IP dialing
• Line 1: 32 digits IP key
• 5 digits area code filtering
• 16 melody rings
• 32 digits pre-dialing
• Auto redial and one-key redial
1
HCD139(B022)
the talk and vice versa. If both lines are in hold, pick up handset/press HF to continue the talk in
line 1 and line 2 keeps in hold, or press LINE 1 or LINE2 directly to continue the talk in
corresponding line and the other line keeps in hold. Press CONE to enable talking among three
parts.
Press CONE at anytime to enable talking among three parts.
DATE/TIME
When LCD displays: SET 1 DATE , press SET, the year digits will flash. Use UP/DOWN to
change the year, then press SET into the setting of the month. Repeat the operation to set the
date, hour, and minute by turn. LCD will automatically display the corresponding day of the week.
FLASH
When LCD displays SET 4 FLASH , press SET, and you will see on LCD FLASH 0:000
. Edit with UP/DOWN, and then press SET to confirm.
AUTO IP
When LCD displays SET 5 IP , press SET, and you will see on LCD AUTO IP OFF with OFF
flashing. Use UP/DOWN to turn on/off the Auto IP function. If you choose the AUTO IP ON,
press SET to confirm, and the LCD will display INPUT CODE . Input your IP service
number, card number, and code. Use SET to change items and confirm, and use DEL to correct
2
HCD139(B022)
input mistakes. If the AUTO IP function is on, the stored IP data will be automatically added first
when you dial a number beginning with “0” at the on-hook pre-dialing mode, or re-dialing a
previously called number (either incoming or outgoing) beginning with “0”. When “0”Lock or
Full Lock is effective, Auto IP setting is not permitted.
LCD CONTRAST
When LCD displays SET 6 LCD , press SET and use UP/DOWN to select among the 5 degrees
which you prefer.
ANTI-STEAL
When LCD displays SET 7 ALAR , press SET, and you will see on LCD ALAR OFF . Use
UP/DOWN to select ON or OFF and press SET to confirm.
DIALING MODE
When LCD displays SET 8 P-T , press SET, and you will see on LCD TONE or PULSE ,
indicating that TONE or PULSE is the present dialing mode. Use UP/DOWN to make the option,
and then press SET to confirm.
3
HCD139(B022)
telephone should be unlocked.). When line 1 at off-hook state, press RD when the number display
on LCD.
RING SELECTION
When both lines at the on-hook state, press RING to choice the line which shown on LCD L1
RING or L2 RING . Use UP/DOWN to select the ring for two lines.
AUTO REDIAL
If the line is busy when you dial a number at the hand-free state, press REDIAL/BACK , and the
number is automatically dialed every 6 seconds. The telephone will ring when you are connected.
Press the Hand-free key or pick up the handset to answer the phone. Abort the automatic dialing
by pressing any key. The REDIAL / BACK function could be only active in line 1 except any line
not in the hold state.
CALL TIME
The display shows the duration of a call in progress since a number has been dialed out. Manual
control is not available.
4
HCD139(B022)
redialing at on-hook state, the pause time between PABX exit code and phone number is about 1
second.
LED INDICATOR&BACK-LIGHT
When any new incoming call is missing, the LED indicator flashes .Checking the new call or
operating the telephone will make the LED turned off. The back-light will be turned on when
receiving an incoming call or dialing, and switched off 6 seconds later after operating finished.
ONE-TOUCH MEMORY
Store: on-hook + number + SET + Mi (i=1,2,3 )
When checking the incoming call /outgoing call/pre-dialing call, press SET and you will see on
LCD: STORE IN. Press Mi (I=1,2,3 ) to store.
Dialing: on-hook + Mi (I=1,2,3 )
Press Mi (i=1,2,3 ) and pick up the handset or press HF key to dial from the line which you
choose.
TWO-TOUCH MEMORY
Store: number + SET + N (N=0 – 9, *, # )
Press RECALL and N (N= 0 – 9, *, # ) and pick up the handset or press HF key to dial from the
line which you choose.