Академический Документы
Профессиональный Документы
Культура Документы
www.elabram.com
LAPTOP A
MS 1-MOC MS 1-MOC External GPS
LAPTOP B
MS1-PS DONGLE
USB Hub
MS 2-MTC
DONGLE
Scanner MS 2-MTC
LAPTOP A
MS 1-MOC MS 1-MOC External GPS
LAPTOP B
MS1-PS DONGLE
USB Hub
MS 2-MTC
DONGLE
Scanner MS 2-MTC
LAPTOP A
External GPS
LAPTOP B
MS1-PS DONGLE
USB Hub
MS 2-MTC
DONGLE
MS 1-MOS BOX
Scanner
LAPTOP B
MS1-PS DONGLE
MS 2-MTC
Scanner
10
11
12
In-order to save time and cost, a practical approach have been initiated by transforming the combination of test cases into 4 rounds. Below are specification of each round. Round 1---------TEST CASE 1 + TEST CASE 4 (Drive Test) Round 2---------TEST CASE 2 + TEST CASE 5 (Drive Test) Round 3---------TEST CASE 3 + TEST CASE 6 (Drive Test) Round 4---------TEST CASE 7 (Static Test)
14
Caution
Tools Setup : Always setup one laptop at one time to avoid hassles Follow all the instructions accordingly. Log files must be created at every beginning of test. Log files must be named properly according to the ECM protocol YYMMDD_C_R_P_T_N where YY=year, MM=month, DD=day, C=cluster name, R=round number, T=Test Type (e.g. VCMOC for voice call MOC), N=Drive Tester initials. Compress together all of the drive test logs at the end of drive test with following naming YYMMDD_C_R_P.zip Run the script in-order to test the functionality before recording
15
Caution
Tools Setup : Always aware that the scanners RF readings must be better/higher then UE. Tune/adjust the RF cable gently in-order to get a better RSCP and EC/No Reading. Plug in all the equipments according to the sequence (eg.MS1-MS2PS1). Check all the equipment properties before start recording.
16
Caution
During Drive Test: Follow the orientation of route accordingly Speeding Rules -50/60kmph Monitor all the test accordingly, and always alert on notification by TEMS (E.g. Event Failure & Hardware Failure) Strictly follow all the protocols that have been set by ECM for each test.
17